From: Bela Hausmann <bela.hausmann@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0
Date: Thu, 27 Feb 2014 23:54:28 +0100 [thread overview]
Message-ID: <530FC224.90305@gmail.com> (raw)
In-Reply-To: <613439C8-AFCE-4B23-81FE-AD4B91A27768@holtmann.org>
Hi Marcel,
sorry for the messed up tabs.
Here is /sys/kernel/debug/usb/devices:
T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=17d0 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
An again the patch.
Best wishes,
Bela
This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
---
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
+ { USB_DEVICE(0x0b05, 0x17d0) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,6 +141,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/btusb.c linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c
--- linux-3.13.5-gentoo/drivers/bluetooth/btusb.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c 2014-02-27 20:10:20.825905643 +0100
@@ -164,6 +164,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
On 27/02/14 23:43, Marcel Holtmann wrote:
> Hi Bela,
>
>> This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
>
> include the content of /sys/kernel/debug/usb/devices for this controller.
>
>>
>> Signed-off-by: Bela Hausmann <bela.hausmann@gmail.com>
>> ---
>> diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
>> --- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
>> +++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
>> @@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
>> { USB_DEVICE(0x13d3, 0x3402) },
>> { USB_DEVICE(0x0cf3, 0x3121) },
>> { USB_DEVICE(0x0cf3, 0xe003) },
>> + { USB_DEVICE(0x0b05, 0x17d0) },
>
> Make sure that you email client does not screw up tabs. This looks pretty much like it is messed up.
>
> Regards
>
> Marcel
>
>
next prev parent reply other threads:[~2014-02-27 22:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-27 21:40 [PATCH] bluetooth: ath3k: added Atheros AR3012 with ID 0x0b05:0x17d0 Bela Hausmann
2014-02-27 22:43 ` Marcel Holtmann
2014-02-27 22:54 ` Bela Hausmann [this message]
2014-02-27 23:19 ` Marcel Holtmann
2014-02-28 20:26 ` Bela Hausmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=530FC224.90305@gmail.com \
--to=bela.hausmann@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.