All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>,
	linux-omap@vger.kernel.org, paul@pwsan.com, tony@atomide.com,
	mturquette@linaro.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls
Date: Fri, 28 Feb 2014 13:14:59 -0600	[thread overview]
Message-ID: <5310E033.3000900@ti.com> (raw)
In-Reply-To: <1393579384-23440-6-git-send-email-t-kristo@ti.com>

On 02/28/2014 03:22 AM, Tero Kristo wrote:
[...]
> +static void __init of_omap2_apll_setup(struct device_node *node)
> +{
> +	struct dpll_data *ad = NULL;
> +	struct clk_hw_omap *clk_hw = NULL;
> +	struct clk_init_data *init = NULL;
> +	struct clk *clk;
> +	const char *parent_name;
> +	u32 val;
> +
> +	ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
> +	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
> +	init = kzalloc(sizeof(*init), GFP_KERNEL);
> +
> +	if (!ad || !clk_hw || !init)
> +		goto cleanup;
> +
> +	clk_hw->dpll_data = ad;
> +	clk_hw->hw.init = init;
> +	init->ops = &omap2_apll_ops;
> +	init->name = node->name;
> +	clk_hw->ops = &omap2_apll_hwops;
> +
> +	init->num_parents = of_clk_get_parent_count(node);
> +	if (init->num_parents != 1) {
> +		pr_err("%s must have one parent\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	parent_name = of_clk_get_parent_name(node, 0);
> +	init->parent_names = &parent_name;
> +
> +	if (of_property_read_u32(node, "ti,clock-frequency", &val)) {
> +		pr_err("%s missing clock-frequency\n", node->name);
> +		goto cleanup;
> +	}
> +	clk_hw->fixed_rate = val;
> +
> +	if (of_property_read_u32(node, "ti,bit-shift", &val)) {
> +		pr_err("%s missing bit-shift\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	clk_hw->enable_bit = val;
> +	ad->enable_mask = 0x3 << val;
> +	ad->autoidle_mask = 0x3 << val;
> +
> +	if (of_property_read_u32(node, "ti,idlest-shift", &val)) {
> +		pr_err("%s missing idlest-shift\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	ad->idlest_mask = 1 << val;
> +
> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> +	ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
> +
> +	if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
> +		goto cleanup;
> +
> +	clk = clk_register(NULL, &clk_hw->hw);
> +	if (!IS_ERR(clk)) {
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +		kfree(init);
> +		return;
> +	}
> +cleanup:
> +	kfree(clk_hw);
> +	kfree(init);
kfree(ad)?

smatch reported (as part of the kernel_patch_verify_report:
+drivers/clk/ti/apll.c:400 of_omap2_apll_setup() warn: possible memory
leak of 'ad'

-- 
Regards,
Nishanth Menon

WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls
Date: Fri, 28 Feb 2014 13:14:59 -0600	[thread overview]
Message-ID: <5310E033.3000900@ti.com> (raw)
In-Reply-To: <1393579384-23440-6-git-send-email-t-kristo@ti.com>

On 02/28/2014 03:22 AM, Tero Kristo wrote:
[...]
> +static void __init of_omap2_apll_setup(struct device_node *node)
> +{
> +	struct dpll_data *ad = NULL;
> +	struct clk_hw_omap *clk_hw = NULL;
> +	struct clk_init_data *init = NULL;
> +	struct clk *clk;
> +	const char *parent_name;
> +	u32 val;
> +
> +	ad = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
> +	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
> +	init = kzalloc(sizeof(*init), GFP_KERNEL);
> +
> +	if (!ad || !clk_hw || !init)
> +		goto cleanup;
> +
> +	clk_hw->dpll_data = ad;
> +	clk_hw->hw.init = init;
> +	init->ops = &omap2_apll_ops;
> +	init->name = node->name;
> +	clk_hw->ops = &omap2_apll_hwops;
> +
> +	init->num_parents = of_clk_get_parent_count(node);
> +	if (init->num_parents != 1) {
> +		pr_err("%s must have one parent\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	parent_name = of_clk_get_parent_name(node, 0);
> +	init->parent_names = &parent_name;
> +
> +	if (of_property_read_u32(node, "ti,clock-frequency", &val)) {
> +		pr_err("%s missing clock-frequency\n", node->name);
> +		goto cleanup;
> +	}
> +	clk_hw->fixed_rate = val;
> +
> +	if (of_property_read_u32(node, "ti,bit-shift", &val)) {
> +		pr_err("%s missing bit-shift\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	clk_hw->enable_bit = val;
> +	ad->enable_mask = 0x3 << val;
> +	ad->autoidle_mask = 0x3 << val;
> +
> +	if (of_property_read_u32(node, "ti,idlest-shift", &val)) {
> +		pr_err("%s missing idlest-shift\n", node->name);
> +		goto cleanup;
> +	}
> +
> +	ad->idlest_mask = 1 << val;
> +
> +	ad->control_reg = ti_clk_get_reg_addr(node, 0);
> +	ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
> +	ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
> +
> +	if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
> +		goto cleanup;
> +
> +	clk = clk_register(NULL, &clk_hw->hw);
> +	if (!IS_ERR(clk)) {
> +		of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +		kfree(init);
> +		return;
> +	}
> +cleanup:
> +	kfree(clk_hw);
> +	kfree(init);
kfree(ad)?

smatch reported (as part of the kernel_patch_verify_report:
+drivers/clk/ti/apll.c:400 of_omap2_apll_setup() warn: possible memory
leak of 'ad'

-- 
Regards,
Nishanth Menon

  reply	other threads:[~2014-02-28 19:14 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-28  9:22 [PATCH 00/12] ARM: OMAP2 DT clock conversion Tero Kristo
2014-02-28  9:22 ` Tero Kristo
2014-02-28  9:22 ` [PATCH 01/12] ARM: OMAP2: convert sys_ck and osc_ck to standard clock types Tero Kristo
2014-02-28  9:22   ` Tero Kristo
2014-02-28  9:22 ` [PATCH 03/12] CLK: TI: DPLL: simplify autoidle register detection logic Tero Kristo
2014-02-28  9:22   ` Tero Kristo
2014-02-28  9:22 ` [PATCH 04/12] CLK: TI: DPLL: add support for omap2 core dpll Tero Kristo
2014-02-28  9:22   ` Tero Kristo
     [not found] ` <1393579384-23440-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2014-02-28  9:22   ` [PATCH 02/12] ARM: OMAP2420: clock: get rid of fixed-div property use Tero Kristo
2014-02-28  9:22     ` Tero Kristo
2014-02-28  9:22   ` [PATCH 05/12] CLK: TI: APLL: add support for omap2 aplls Tero Kristo
2014-02-28  9:22     ` Tero Kristo
2014-02-28 19:14     ` Nishanth Menon [this message]
2014-02-28 19:14       ` Nishanth Menon
2014-02-28  9:22 ` [PATCH 06/12] CLK: TI: gate: fixed DT binding documentation bugs Tero Kristo
2014-02-28  9:22   ` Tero Kristo
2014-02-28  9:22 ` [PATCH 07/12] CLK: TI: interface: add support for omap2430 specific interface clock Tero Kristo
2014-02-28  9:22   ` Tero Kristo
2014-02-28  9:23 ` [PATCH 08/12] CLK: TI: OMAP2: add clock init support Tero Kristo
2014-02-28  9:23   ` Tero Kristo
2014-02-28  9:23 ` [PATCH 09/12] ARM: dts: omap2 clock data Tero Kristo
2014-02-28  9:23   ` Tero Kristo
2014-02-28  9:23 ` [PATCH 10/12] ARM: OMAP2: clock: add DT boot support for cpufreq_ck Tero Kristo
2014-02-28  9:23   ` Tero Kristo
2014-02-28  9:23 ` [PATCH 11/12] ARM: OMAP2: PRM: add support for OMAP2 specific clock providers Tero Kristo
2014-02-28  9:23   ` Tero Kristo
2014-02-28 19:17   ` Nishanth Menon
2014-02-28 19:17     ` Nishanth Menon
2014-02-28  9:23 ` [PATCH 12/12] ARM: OMAP2: clock: use DT clock boot if available Tero Kristo
2014-02-28  9:23   ` Tero Kristo
2014-02-28 15:59 ` [PATCH 00/12] ARM: OMAP2 DT clock conversion Nishanth Menon
2014-02-28 15:59   ` Nishanth Menon
2014-02-28 18:01   ` Tony Lindgren
2014-02-28 18:01     ` Tony Lindgren
2014-02-28 18:18     ` Tero Kristo
2014-02-28 18:18       ` Tero Kristo
2014-02-28 18:33       ` Tony Lindgren
2014-02-28 18:33         ` Tony Lindgren
2014-03-03  8:16         ` Tero Kristo
2014-03-03  8:16           ` Tero Kristo
2014-03-03 18:46           ` Tony Lindgren
2014-03-03 18:46             ` Tony Lindgren
2014-03-03 18:51             ` Tero Kristo
2014-03-03 18:51               ` Tero Kristo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5310E033.3000900@ti.com \
    --to=nm@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=paul@pwsan.com \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.