From: Jaehoon Chung <jh80.chung@samsung.com>
To: "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Cc: Chris Ball <chris@printf.net>,
Ulf Hansson <ulf.hansson@linaro.org>,
Seungwon Jeon <tgih.jun@samsung.com>
Subject: [PATCH v4 6/7] mmc: dw_mmc: remove the dw_mci_of_cd_gpio/wp_gpio()
Date: Mon, 03 Mar 2014 11:36:46 +0900 [thread overview]
Message-ID: <5313EABE.3050405@samsung.com> (raw)
If mmc_of_parse() is used, dw_mci_of_get_cd_gpio/wp_gpio didn't need.
Already implemented into mmc_of_parse().
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Changelog V4:
- Remove the wp_gpio code.
Changelog V3:
- None
drivers/mmc/host/dw_mmc.c | 60 +++------------------------------------------
drivers/mmc/host/dw_mmc.h | 2 --
2 files changed, 3 insertions(+), 59 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 1418d33..22184c1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -994,12 +994,13 @@ static int dw_mci_get_ro(struct mmc_host *mmc)
{
int read_only;
struct dw_mci_slot *slot = mmc_priv(mmc);
+ int gpio_ro = mmc_gpio_get_ro(mmc);
/* Use platform get_ro function, else try on board write protect */
if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT)
read_only = 0;
- else if (gpio_is_valid(slot->wp_gpio))
- read_only = gpio_get_value(slot->wp_gpio);
+ else if (!IS_ERR_VALUE(gpio_ro))
+ read_only = gpio_ro;
else
read_only =
mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
@@ -2025,49 +2026,6 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
return quirks;
}
-
-/* find the write protect gpio for a given slot; or -1 if none specified */
-static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
-{
- struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
- int gpio;
-
- if (!np)
- return -EINVAL;
-
- gpio = of_get_named_gpio(np, "wp-gpios", 0);
-
- /* Having a missing entry is valid; return silently */
- if (!gpio_is_valid(gpio))
- return -EINVAL;
-
- if (devm_gpio_request(dev, gpio, "dw-mci-wp")) {
- dev_warn(dev, "gpio [%d] request failed\n", gpio);
- return -EINVAL;
- }
-
- return gpio;
-}
-
-/* find the cd gpio for a given slot */
-static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
- struct mmc_host *mmc)
-{
- struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
- int gpio;
-
- if (!np)
- return;
-
- gpio = of_get_named_gpio(np, "cd-gpios", 0);
-
- /* Having a missing entry is valid; return silently */
- if (!gpio_is_valid(gpio))
- return;
-
- if (mmc_gpio_request_cd(mmc, gpio, 0))
- dev_warn(dev, "gpio [%d] request failed\n", gpio);
-}
#else /* CONFIG_OF */
static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
{
@@ -2077,15 +2035,6 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
{
return NULL;
}
-static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
-{
- return -EINVAL;
-}
-static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
- struct mmc_host *mmc)
-{
- return;
-}
#endif /* CONFIG_OF */
static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
@@ -2164,9 +2113,6 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
#endif /* CONFIG_MMC_DW_IDMAC */
}
- slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
- dw_mci_of_get_cd_gpio(host->dev, slot->id, mmc);
-
ret = mmc_add_host(mmc);
if (ret)
goto err_setup_bus;
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 6bf24ab..0c75f2c 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -195,7 +195,6 @@ extern int dw_mci_resume(struct dw_mci *host);
* @mmc: The mmc_host representing this slot.
* @host: The MMC controller this slot is using.
* @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX)
- * @wp_gpio: If gpio_is_valid() we'll use this to read write protect.
* @ctype: Card type for this slot.
* @mrq: mmc_request currently being processed or waiting to be
* processed, or NULL when the slot is idle.
@@ -214,7 +213,6 @@ struct dw_mci_slot {
struct dw_mci *host;
int quirks;
- int wp_gpio;
u32 ctype;
--
1.7.9.5
next reply other threads:[~2014-03-03 2:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-03 2:36 Jaehoon Chung [this message]
2014-03-06 7:35 ` [PATCH v4 6/7] mmc: dw_mmc: remove the dw_mci_of_cd_gpio/wp_gpio() Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5313EABE.3050405@samsung.com \
--to=jh80.chung@samsung.com \
--cc=chris@printf.net \
--cc=linux-mmc@vger.kernel.org \
--cc=tgih.jun@samsung.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.