[U-Boot] [PATCH V2 1/3] cpu: exynos4: ace_sha: add hardware random number generator support.

[Jaehoon Chung <jh80.chung@samsung.com>]

On 03/06/2014 01:57 AM, Przemyslaw Marczak wrote:
> This patch adds implementation of function hw_rand() based on exynos
> security sub system.
> 
> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
> cc: Akshay Saraswat <akshay.s@samsung.com>
> cc: ARUN MANKUZHI <arun.m@samsung.com>
> cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
> Changes v2:
> - none
> 
>  arch/arm/include/asm/arch-exynos/cpu.h |    4 ++--
>  drivers/crypto/ace_sha.c               |   41 ++++++++++++++++++++++++++++++++
>  drivers/crypto/ace_sha.h               |    8 ++++---
>  3 files changed, 48 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
> index bccce63..a5c280d 100644
> --- a/arch/arm/include/asm/arch-exynos/cpu.h
> +++ b/arch/arm/include/asm/arch-exynos/cpu.h
> @@ -48,7 +48,7 @@
>  #define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_DP_BASE			DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
> -#define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
> +#define EXYNOS4_ACE_SFR_BASE		0x10830000
>  #define EXYNOS4_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
> @@ -87,7 +87,7 @@
>  #define EXYNOS4X12_I2S_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_SPI_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
> -#define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
> +#define EXYNOS4X12_ACE_SFR_BASE		0x10830000
>  #define EXYNOS4X12_DMC_PHY_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_AUDIOSS_BASE		DEVICE_NOT_AVAILABLE
>  #define EXYNOS4X12_USB_HOST_XHCI_BASE	DEVICE_NOT_AVAILABLE
> diff --git a/drivers/crypto/ace_sha.c b/drivers/crypto/ace_sha.c
> index acbafde..d12a507 100644
> --- a/drivers/crypto/ace_sha.c
> +++ b/drivers/crypto/ace_sha.c
> @@ -111,3 +111,44 @@ void hw_sha1(const unsigned char *pbuf, unsigned int buf_len,
>  	if (ace_sha_hash_digest(pbuf, buf_len, pout, ACE_SHA_TYPE_SHA1))
>  		debug("ACE was not setup properly or it is faulty\n");
>  }
> +
> +unsigned int hw_rand(void)
> +{
> +	struct exynos_ace_sfr *reg =
> +		(struct exynos_ace_sfr *)samsung_get_base_ace_sfr();
> +	int status, i;
> +	int seed[5];
> +	unsigned int ret = 0;
> +
> +	/* Seed data */
> +	for (i = 0; i < ACE_HASH_PRNG_REG_NUM; i++)
> +		writel(seed[i], &reg->hash_seed[i]);
> +
> +	status = 0;
> +	/* Wait for seed setup done */
> +	while (!(status & ACE_HASH_SEEDSETTING_MASK)) {
> +		status = readl(&reg->hash_status);
> +		if (status & ACE_HASH_PRNGERROR_MASK)
> +			return 0;
> +	}
Can it use "do{ }while"?

> +
> +	/* Start PRNG */
> +	writel(ACE_HASH_ENGSEL_PRNG | ACE_HASH_STARTBIT_ON, &reg->hash_control);
> +
> +	status = 0;
> +	/* Wait for PRNG done */
> +	while (!(status & ACE_HASH_PRNGDONE_MASK)) {
> +		status = readl(&reg->hash_status);
> +		if (status & ACE_HASH_PRNGERROR_MASK)
> +			return 0;
> +	}
> +
> +	/* Clear Done IRQ */
> +	writel(ACE_HASH_PRNGDONE_MASK, &reg->hash_status);
> +
> +	/* Read a PRNG result */
> +	for (i = 0; i < ACE_HASH_PRNG_REG_NUM; i++)
> +		ret += readl(&reg->hash_prng[i]);
> +
> +	return ret;
> +}
> diff --git a/drivers/crypto/ace_sha.h b/drivers/crypto/ace_sha.h
> index a426d52..f1097f7 100644
> --- a/drivers/crypto/ace_sha.h
> +++ b/drivers/crypto/ace_sha.h
> @@ -72,9 +72,10 @@ struct exynos_ace_sfr {
>  	unsigned char   res12[0x30];
>  	unsigned int	hash_result[8];
>  	unsigned char   res13[0x20];
> -	unsigned int	hash_seed[8];
> -	unsigned int	hash_prng[8];
> -	unsigned char   res14[0x180];
> +	unsigned int	hash_seed[5];
> +	unsigned char	res14[12];
> +	unsigned int	hash_prng[5];
> +	unsigned char	res15[0x18c];
>  
>  	unsigned int	pka_sfr[5];		/* base + 0x700 */
>  };
> @@ -291,6 +292,7 @@ struct exynos_ace_sfr {
>  #define ACE_HASH_PRNGERROR_MASK	(1 << 7)
>  #define ACE_HASH_PRNGERROR_OFF		(0 << 7)
>  #define ACE_HASH_PRNGERROR_ON		(1 << 7)
> +#define ACE_HASH_PRNG_REG_NUM		5
>  
>  #define ACE_SHA_TYPE_SHA1		1
>  #define ACE_SHA_TYPE_SHA256		2
>