From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Berger Date: Fri, 07 Mar 2014 12:14:48 +0200 Message-ID: <53199C18.40508@reliableembeddedsystems.com> References: <1394099202.26562.YahooMailNeo@web163902.mail.gq1.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit In-Reply-To: <1394099202.26562.YahooMailNeo@web163902.mail.gq1.yahoo.com> Subject: Re: [Xenomai] process behaviour when running xenomai List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org Hi, On 03/06/2014 11:46 AM, Huub Van Niekerk wrote: > Hi, > > I'm running Xenomai 2.6.3 with kernel 3.10.18 now on BeagleBoard-Xm Rev. C and experience this behaviour: when I try to install packages from commandline, the installation manager starts quick and reads the package(s), but after that it stays dead quiet like it's frozen. ps -ef shows it's just going on, no defunc or anything like that. Also, when I want to watch the processes using top, it starts, but nothing shows. When I want to end it, Ctl-C gives no response giving me no other option than to use kill. Is this a known behaviour when running Xenomai ? I tried something similar (just took the patch from the ELDK 5.5) but have some issues: 1) no network on the beagle-xm and even if I hack my way through with phy_nop it's not getting better I really would like to boot with a rootfs over nfs and it does not look like this is going to hapen with a 3.10 kernel on a beagle-xm. 3.13.x with fdt works nicely, but there is no Xenomai patch for it;) > > > Thanks, > > hvn > Regards, Robert ...For every complex problem there is a solution which is simple, neat and wrong. -- H.L. Mencken My public pgp key is available,at: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x90320BF1