From: Stan Hoeppner <stan@hardwarefreak.com>
To: Ray Van Dolson <rvandolson@esri.com>, xfs@oss.sgi.com
Subject: Re: sw and su for hardware RAID10 (w/ LVM)
Date: Wed, 12 Mar 2014 06:37:13 -0500 [thread overview]
Message-ID: <532046E9.9090302@hardwarefreak.com> (raw)
In-Reply-To: <20140311045639.GA18159@esri.com>
On 3/10/2014 11:56 PM, Ray Van Dolson wrote:
> RHEL6.x + XFS that comes w/ Red Hat's scalable file system add on. We
> have two PowerVault MD3260e's each configured with a 30 disk RAID10 (15
> RAID groups) exposed to our server. Segment size is 128K (in Dell's
> world I'm not sure if this means my stripe width is 128K*15?)
128KB must be the stripe unit.
> Have set up a concatenated LVM volume on top of these two "virtual
> disks" (with lvcreate -i 2).
This is because you created a 2 stripe array, not a concatenation.
> By default LVM says it's used a stripe width of 64K.
>
> # lvs -o path,size,stripes,stripe_size
> Path LSize #Str Stripe
> /dev/agsfac_vg00/lv00 100.00t 2 64.00k
from lvcreate(8)
-i, --stripes Stripes
Gives the number of stripes...
> Unsure if these defaults should be adjusted.
>
> I'm trying to figure out the appropriate sw/su values to use per:
>
> http://xfs.org/index.php/XFS_FAQ#Q:_How_to_calculate_the_correct_sunit.2Cswidth_values_for_optimal_performance
>
> Am considering either just going with defaults (XFS should pull from
> LVM I think) or doing something like sw=2,su=128K. However, maybe I
> should be doing sw=2,su=1920K? And perhaps my LVM stripe width should
> be adjusted?
Why don't you first tell us what you want? You say at the top that you
created a concatenation, but at the bottom you say LVM stripe. So first
tell us which one you actually want, because the XFS alignment is
radically different for each.
Then tell us why you must use LVM instead of md. md has fewer
problems/limitations for stripes and concat than LVM, and is much easier
to configure.
--
Stan
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2014-03-12 11:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-11 4:56 sw and su for hardware RAID10 (w/ LVM) Ray Van Dolson
2014-03-12 11:37 ` Stan Hoeppner [this message]
2014-03-13 14:23 ` Ray Van Dolson
2014-03-14 0:11 ` Stan Hoeppner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=532046E9.9090302@hardwarefreak.com \
--to=stan@hardwarefreak.com \
--cc=rvandolson@esri.com \
--cc=xfs@oss.sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.