[U-Boot] [PATCH] arm: omap: cm_t35: Fix: Re-add GPMC_NAND_ECC_LP_x8_LAYOUT

[Stefan Roese <sr@denx.de>]

Hi Pekon,

On 13.03.2014 12:49, Gupta, Pekon wrote:
>> From: Stefan Roese [mailto:sr at denx.de]
>>
>> Patch a7e36fc9 (mtd: nand: omap: remove unused #defines from common
>> omap_gpmc.h) removed some MTD related defines. Including
>> GPMC_NAND_ECC_LP_x8_LAYOUT. But this define is also needed for the
>> memory controller configuration (only the x8 defines are needed,
>> the x16 defines are the default). Without it the NAND subsystem is
>> not configured correctly and booting into U-Boot does not work.
>>
> The root cause of this problem is in  ..
> 	arch/arm/cpu/armv7/omap3/mem.c
> #if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT)
> where based on GPMC_NAND_ECC_LP_x8_LAYOUT, different
> controller configuration is selected.

I know as I introduced this code a while ago for this x8 NAND target. ;)

> Unless you need a urgent fix,

Yes, I need an urgent fix. This board does not boot anymore. Note that 
Tom already pulled my patch into his TI repo. So this fix is on its way 
right now.

> - I would suggest to use [1] instead. I'll try to get a cleaner version
> of [1] incorporating other comments from Scott, soon.
>
> - Alternatively, you can also look at [2], which is more robust but
> was still under discussion.

Yes, your patches look more elegant. I suggest to move to them once the 
discussion has settled. And then remove these x8_LAYOUT defines 
completely when they are really not needed any more. But please not sooner.

Thanks,
Stefan