From: Sam Bradshaw <sbradshaw@micron.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: <linux-kernel@vger.kernel.org>,
Felipe Franciosi <felipe@paradoxo.org>, <david.vrabel@citrix.com>,
"Asai Thambi Samymuthu Pattrayasamy (asamymuthupa)"
<asamymuthupa@micron.com>
Subject: Re: [PATCH] mtip32xx: mtip_async_complete() bug fixes
Date: Thu, 13 Mar 2014 14:33:30 -0700 [thread overview]
Message-ID: <5322242A.6080901@micron.com> (raw)
In-Reply-To: <53221CF5.2080000@kernel.dk>
On 03/13/2014 02:02 PM, Jens Axboe wrote:
> On 03/13/2014 03:09 PM, Sam Bradshaw wrote:
>> This patch fixes 2 issues in the fast completion path:
>> 1) Possible double completions / double dma_unmap_sg() calls due to lack
>> of atomicity in the check and subsequent dereference of the upper layer
>> callback function. Fixed with cmpxchg before unmap and callback.
>> 2) Regression in unaligned IO constraining workaround for p420m devices.
>> Fixed by checking if IO is unaligned and using proper semaphore if so.
>
> Sam, what is this patch against? It doesn't apply to -rc6 and it doesn't
> apply to for-3.15/drivers (the latter would be preferred/required). It
> also seems to have line break issues.
>
It's against for-3.15/drivers. Sorry about the breaks; if I remove them
does it apply cleanly?
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index b2012b7..624e9d9 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -252,38 +252,45 @@ static void mtip_async_complete(struct mtip_port *port,
void *data,
int status)
{
- struct mtip_cmd *command;
+ struct mtip_cmd *cmd;
struct driver_data *dd = data;
- int cb_status = status ? -EIO : 0;
+ int unaligned, cb_status = status ? -EIO : 0;
+ void (*func)(void *, int);
if (unlikely(!dd) || unlikely(!port))
return;
- command = &port->commands[tag];
+ cmd = &port->commands[tag];
if (unlikely(status == PORT_IRQ_TF_ERR)) {
dev_warn(&port->dd->pdev->dev,
"Command tag %d failed due to TFE\n", tag);
}
- /* Unmap the DMA scatter list entries */
- dma_unmap_sg(&dd->pdev->dev,
- command->sg,
- command->scatter_ents,
- command->direction);
+ /* Clear the active flag */
+ atomic_set(&port->commands[tag].active, 0);
/* Upper layer callback */
- if (likely(command->async_callback))
- command->async_callback(command->async_data, cb_status);
+ func = cmd->async_callback;
+ if (likely(func && cmpxchg(&cmd->async_callback, func, 0) == func)) {
- command->async_callback = NULL;
- command->comp_func = NULL;
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&dd->pdev->dev,
+ cmd->sg,
+ cmd->scatter_ents,
+ cmd->direction);
- /* Clear the allocated and active bits for the command */
- atomic_set(&port->commands[tag].active, 0);
- release_slot(port, tag);
+ func(cmd->async_data, cb_status);
+ unaligned = cmd->unaligned;
- up(&port->cmd_slot);
+ /* Clear the allocated bit for the command */
+ release_slot(port, tag);
+
+ if (unlikely(unaligned))
+ up(&port->cmd_slot_unal);
+ else
+ up(&port->cmd_slot);
+ }
}
/*
@@ -660,11 +667,12 @@ static void mtip_timeout_function(unsigned long int data)
{
struct mtip_port *port = (struct mtip_port *) data;
struct host_to_dev_fis *fis;
- struct mtip_cmd *command;
- int tag, cmdto_cnt = 0;
+ struct mtip_cmd *cmd;
+ int unaligned, tag, cmdto_cnt = 0;
unsigned int bit, group;
unsigned int num_command_slots;
unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
+ void (*func)(void *, int);
if (unlikely(!port))
return;
@@ -694,8 +702,8 @@ static void mtip_timeout_function(unsigned long int data)
group = tag >> 5;
bit = tag & 0x1F;
- command = &port->commands[tag];
- fis = (struct host_to_dev_fis *) command->command;
+ cmd = &port->commands[tag];
+ fis = (struct host_to_dev_fis *) cmd->command;
set_bit(tag, tagaccum);
cmdto_cnt++;
@@ -709,27 +717,30 @@ static void mtip_timeout_function(unsigned long int data)
*/
writel(1 << bit, port->completed[group]);
- /* Unmap the DMA scatter list entries */
- dma_unmap_sg(&port->dd->pdev->dev,
- command->sg,
- command->scatter_ents,
- command->direction);
+ /* Clear the active flag for the command */
+ atomic_set(&port->commands[tag].active, 0);
- /* Call the async completion callback. */
- if (likely(command->async_callback))
- command->async_callback(command->async_data,
- -EIO);
- command->async_callback = NULL;
- command->comp_func = NULL;
+ func = cmd->async_callback;
+ if (func &&
+ cmpxchg(&cmd->async_callback, func, 0) == func) {
- /*
- * Clear the allocated bit and active tag for the
- * command.
- */
- atomic_set(&port->commands[tag].active, 0);
- release_slot(port, tag);
+ /* Unmap the DMA scatter list entries */
+ dma_unmap_sg(&port->dd->pdev->dev,
+ cmd->sg,
+ cmd->scatter_ents,
+ cmd->direction);
- up(&port->cmd_slot);
+ func(cmd->async_data, -EIO);
+ unaligned = cmd->unaligned;
+
+ /* Clear the allocated bit for the command. */
+ release_slot(port, tag);
+
+ if (unaligned)
+ up(&port->cmd_slot_unal);
+ else
+ up(&port->cmd_slot);
+ }
}
}
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 54174cb..ffb955e 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -92,7 +92,7 @@
/* Driver name and version strings */
#define MTIP_DRV_NAME "mtip32xx"
-#define MTIP_DRV_VERSION "1.3.0"
+#define MTIP_DRV_VERSION "1.3.1"
/* Maximum number of minor device numbers per device. */
#define MTIP_MAX_MINORS 16
next prev parent reply other threads:[~2014-03-13 21:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-13 21:09 [PATCH] mtip32xx: mtip_async_complete() bug fixes Sam Bradshaw
2014-03-13 21:02 ` Jens Axboe
2014-03-13 21:33 ` Sam Bradshaw [this message]
2014-03-13 21:59 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5322242A.6080901@micron.com \
--to=sbradshaw@micron.com \
--cc=asamymuthupa@micron.com \
--cc=axboe@kernel.dk \
--cc=david.vrabel@citrix.com \
--cc=felipe@paradoxo.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.