[For Help]Wrong mac address when i used ath10k driver

From: wangdc <wangdc@dhc.com.cn>
To: ath10k@lists.infradead.org
Subject: [For Help]Wrong mac address when i used ath10k driver
Date: Tue, 18 Mar 2014 17:08:49 +0800	[thread overview]
Message-ID: <53280D21.9080008@dhc.com.cn> (raw)

Hi all,

When i used the driver of the ath10k(backports-3.13.2-1) to drive the 
11ac mini-pcie WIFI card(9880)
on the ubuntu 12.04(based x86), the card seems to be working but i got a 
wrong mac address when
i used the following command. Though i changed the other mini-pcie card, 
i got the same mac address.
---------------
root@ubuntu:~$ cat /sys/class/ieee80211/phy0/addresses
00:03:07:12:34:56
---------------

If anybody get the same this problem, could you please tell me how to 
fix it.

Any suggestions would be helpful.

ps:
start log when i grep ath as following:
root@ubuntu:~$ dmesg | grep ath
[   25.240895] ath10k_pci 0000:04:00.0: BAR 0: assigned [mem 
0xf0400000-0xf05fffff 64bit]
[   25.240918] ath10k_pci 0000:04:00.0: BAR 0: set to [mem 
0xf0400000-0xf05fffff 64bit] (PCI address [0xf0400000-0xf05fffff])
[   25.240932] ath10k_pci 0000:04:00.0: enabling device (0000 -> 0002)
[   25.240943] ath10k_pci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) 
-> IRQ 18
[   25.241008] ath10k_pci 0000:04:00.0: setting latency timer to 64
[   25.241481] ath10k: MSI-X didn't succeed (1), trying MSI
[   25.241549] ath10k_pci 0000:04:00.0: irq 45 for MSI/MSI-X
[   25.241582] ath10k: MSI interrupt handling
[   25.274432] ath10k: Hardware name qca988x hw2.0 version 0x4100016c
[   26.645636] ath10k: UART prints disabled
[   26.649723] ath10k: firmware 999.999.0.636 booted
[   26.659427] ath10k: htt target version 2.1
[   26.659951] ath: EEPROM regdomain: 0x0
[   26.659953] ath: EEPROM indicates default country code should be used
[   26.659954] ath: doing EEPROM country->regdmn map search
[   26.659956] ath: country maps to regdmn code: 0x3a
[   26.659958] ath: Country alpha2 being used: US
[   26.659960] ath: Regpair used: 0x3a
[   62.880138] type=1400 audit(1395133013.810:12): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/telepathy/mission-control-5" 
pid=1117 comm="apparmor_parser"
[   62.880710] type=1400 audit(1395133013.810:13): apparmor="STATUS" 
operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1117 
comm="apparmor_parser"
[   63.953074] ath10k: MSI-X didn't succeed (1), trying MSI
[   63.953152] ath10k_pci 0000:04:00.0: irq 45 for MSI/MSI-X
[   63.953190] ath10k: MSI interrupt handling
[   65.135257] ath10k: UART prints disabled
[   65.139331] ath10k: firmware 999.999.0.636 booted
[   65.149084] ath10k: htt target version 2.1
[   89.023995] ath10k: timed out while waiting for scan to stop
[   89.023998] ath10k: could not stop scan. its still in progress
[   91.068213] type=1400 audit(1395133042.038:25): apparmor="DENIED" 
operation="open" parent=2372 
profile="/usr/lib/telepathy/mission-control-5" 
name="/usr/local/lib/libsqlite3.so.0.8.6" pid=2373 
comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

Thanks.

Rex wang
2014-03-07

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k