From: Andres Bertens <abertensu@yahoo.com>
To: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org, johannes.berg@intel.com, wujianguo@huawei.com
Subject: 3.4.84-stable review: iwlwifi module fails with an Intel 6205
Date: Fri, 21 Mar 2014 16:28:20 -0300 [thread overview]
Message-ID: <532C92D4.6070200@yahoo.com> (raw)
Hello,
Same as reported with 3.4.83 release, 3.4.84-rc1 also makes my wifi
network card stop working:
iwlwifi 0000:03:00.0: Failed to run INIT ucode: -110
iwlwifi 0000:03:00.0: Unable to initialize device.
My laptop is a Lenovo Thinkpad X230 with an Intel Corporation Centrino
Advanced-N 6205 [Taylor Peak] (rev 34). Another user also reported same
problem with an Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
As a workaround, reverting patch from release 3.4.83:
Johannes Berg <johannes.berg@intel.com>
iwlwifi: always copy first 16 bytes of commands
makes it work again.
Saludos,
Andres Bertens
PS
If of any interest, here are related logs.
Linux mintaka 3.4.84-rc1 #1 SMP Fri Mar 21 15:38:25 CLST 2014 x86_64
x86_64 x86_64 GNU/Linux
Device not working (without reverting patch)
============================================
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90006658000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN,
REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: Error sending CALIBRATION_CFG_CMD: time out after
2000ms.
iwlwifi 0000:03:00.0: Current CMD queue read_ptr 2 write_ptr 3
iwlwifi 0000:03:00.0: Failing on timeout while stopping DMA channel 7
[0x077f0001]
iwlwifi 0000:03:00.0: Failed to run INIT ucode: -110
iwlwifi 0000:03:00.0: Unable to initialize device.
Device working (patch reverted)
================================
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90006610000
iwlwifi 0000:03:00.0: HW Revision ID = 0x34
iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN,
REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0x1F0
iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
reply other threads:[~2014-03-21 19:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=532C92D4.6070200@yahoo.com \
--to=abertensu@yahoo.com \
--cc=johannes.berg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=wujianguo@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.