From: Stephen Warren <swarren@wwwdotorg.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6] add README.distro file
Date: Tue, 25 Mar 2014 14:40:09 -0600 [thread overview]
Message-ID: <5331E9A9.60002@wwwdotorg.org> (raw)
In-Reply-To: <20140321184842.GN16360@bill-the-cat>
On 03/21/2014 12:48 PM, Tom Rini wrote:
> On Thu, Mar 20, 2014 at 05:12:56PM -0500, Dennis Gilmore wrote:
>
>> Add documentation on how to setup a system to use the generic distro
>> configs and boot commands. This spells out what is needed to make a
>> system conformant, but does not limit the board to only the defaults.
>>
>> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
>
> [snip]
>> +suggested mapping:
>> +For suggestions on memory locations for arm systems you must follow the
>> +guidelines specified in Documentation/arm/Booting in the Linux kernel tree.
>> +For other architectures you must follow the guidelines for the architecture.
>
> Can you add something about what this means? ie below base+128MB for
> kernel, because of this if possible base+128MB for fdt, fdt+512KB for
> ramdisk. And mention bootm_size to limit the relocation pool as well.
I'm biased, but I like the explanations in
include/configs/tegraNN-common.h:-)
next prev parent reply other threads:[~2014-03-25 20:40 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 17:56 [U-Boot] RFC unified boot environment Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work Dennis Gilmore
2014-02-19 13:42 ` Tom Rini
2014-02-19 13:57 ` Dennis Gilmore
2014-02-19 15:54 ` Marek Vasut
2014-02-19 17:28 ` Stephen Warren
2014-02-19 17:30 ` Marek Vasut
2014-02-19 17:41 ` Stephen Warren
2014-02-19 17:44 ` Marek Vasut
2014-02-19 17:40 ` Stephen Warren
2014-02-22 8:20 ` Dennis Gilmore
2014-02-24 18:40 ` Stephen Warren
2014-02-24 20:07 ` Tom Rini
2014-02-19 18:44 ` Dan Murphy
2014-02-19 18:48 ` Stephen Warren
2014-02-19 18:52 ` Dan Murphy
2014-02-19 18:57 ` Stephen Warren
2014-02-19 18:59 ` Dan Murphy
2014-02-19 19:04 ` Stephen Warren
2014-02-19 19:10 ` Tom Rini
2014-02-19 19:16 ` Stephen Warren
2014-02-19 19:36 ` Tom Rini
2014-02-19 19:43 ` Stephen Warren
2014-02-19 19:57 ` Tom Rini
2014-02-19 20:10 ` Dennis Gilmore
2014-02-19 19:32 ` Dan Murphy
2014-02-19 19:38 ` Stephen Warren
2014-02-19 20:03 ` Dan Murphy
2014-02-19 19:02 ` Eric Nelson
2014-02-19 19:05 ` Dan Murphy
2014-02-19 19:16 ` Tom Rini
2014-02-19 19:24 ` Dan Murphy
2014-02-19 19:29 ` Stephen Warren
2014-02-19 19:37 ` Dan Murphy
2014-02-19 19:43 ` Tom Rini
2014-02-19 19:41 ` Tom Rini
2014-02-19 21:20 ` Denys Dmytriyenko
2014-02-20 12:31 ` Otavio Salvador
2014-02-20 13:46 ` Tom Rini
2014-02-22 12:56 ` Otavio Salvador
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs Dennis Gilmore
2014-02-19 13:52 ` Tom Rini
2014-02-19 17:46 ` Stephen Warren
2014-02-19 19:57 ` Dan Murphy
2014-02-19 19:58 ` Dan Murphy
2014-02-19 20:05 ` Stephen Warren
2014-02-19 20:20 ` Dan Murphy
2014-02-19 20:22 ` Stephen Warren
2014-02-19 20:31 ` Dan Murphy
2014-02-19 20:38 ` Stephen Warren
2014-02-19 20:58 ` Dan Murphy
2014-02-19 21:07 ` Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment Dennis Gilmore
2014-02-19 11:52 ` Otavio Salvador
2014-02-19 17:50 ` Stephen Warren
2014-02-18 10:18 ` [U-Boot] RFC unified boot environment Stefano Babic
2014-02-18 16:09 ` Dennis Gilmore
2014-02-19 13:33 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 0/6] " Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 1/6] add README.distro file Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:40 ` Stephen Warren [this message]
2014-03-25 20:24 ` Stephen Warren
2014-03-28 15:42 ` Tom Rini
2014-03-28 16:11 ` Stephen Warren
2014-03-28 16:25 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 2/6] add header with a generic set of boot commands defined Dennis Gilmore
2014-03-21 18:37 ` Marek Vasut
2014-03-21 18:53 ` Tom Rini
2014-03-21 21:00 ` Marek Vasut
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:38 ` Stephen Warren
2014-03-25 20:36 ` Stephen Warren
2014-03-20 22:12 ` [U-Boot] [PATCH 3/6] move wandboard over to use the generic distro configuation and environment Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 4/6] move beagleboard " Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 5/6] move pandaboard " Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 6/6] pxe: additionaly check for fdt_file env variable Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-25 20:45 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5331E9A9.60002@wwwdotorg.org \
--to=swarren@wwwdotorg.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.