[U-Boot] [PATCH 04/10] power: Explicitly select pmic device's bus

[Heiko Schocher <hs@denx.de>]

Hello Lukasz,

Am 31.03.2014 08:17, schrieb Lukasz Majewski:
> Hi Heiko,
>
>> Hello Simon, Lukasz,
>>
>> Am 30.03.2014 01:17, schrieb Simon Glass:
>>> Hi Lukasz,
>>>
>>> On 27 March 2014 11:33, Lukasz Majewski<l.majewski@samsung.com>
>>> wrote:
>>>
>>>> Hi Simon, Heiko
>>>>
>>>>> From: Aaron Durbin<adurbin@chromium.org>
>>>>>
>>>>> The current pmic i2c code assumes the current i2c bus is
>>>>> the same as the pmic device's bus. There is nothing ensuring
>>>>> that to be true. Therefore, select the proper bus before
>>>>> performing a transaction.
>>>>>
>>>>> Signed-off-by: Aaron Durbin<adurbin@chromium.org>
>>>>> Signed-off-by: Simon Glass<sjg@chromium.org>
>>>>> Reviewed-by: Simon Glass<sjg@chromium.org>
>>>>> ---
>>>>>
>>>>>    drivers/power/power_i2c.c | 4 ++++
>>>>>    1 file changed, 4 insertions(+)
>>>>>
>>>>> diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
>>>>> index ac76870..594cd11 100644
>>>>> --- a/drivers/power/power_i2c.c
>>>>> +++ b/drivers/power/power_i2c.c
>>>>> @@ -23,6 +23,8 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32
>>>>> val) if (check_reg(p, reg))
>>>>>                 return -1;
>>>>>
>>>>> +     I2C_SET_BUS(p->bus);
>>>>> +
>>>>
>>>> Hadn't we had a  discussion about this explicit setting of I2C
>>>> some time ago? I thought that this problem was solved within the
>>>> I2C rework.
>>>>
>>>> Also I might be wrong, so please correct me if I'm wrong. Isn't the
>>>> I2C_SET_BUS() macro regarded as a obsolete after the I2C rework?
>>>>
>>>
>>> Agreed that would be ideal, but we would have to pass the bus
>>> number of the i2c_read/write() functions. I don't believe the i2c
>>> code has got that far yet.
>>
>> Yes, thats the plan, but first, all i2c driver must be converted to
>> the new framework. After that we could start with such an approach
>> (or device model is ready and we can switch to it ...)
>
> I know that there is a time line for introducing device model, but is
> there any for switching I2C to the new approach?

I am not aware of a plan ...

> I think about deleting obsolete/unmaintained boards, which will not
> switch to new I2C approach.

Hmm... this would be a long list, as there are the following driver
which need a conversion:

obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
obj-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
obj-$(CONFIG_DW_I2C) += designware_i2c.o
obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_U8500_I2C) += u8500_i2c.o
obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o

Also some drivers in cpu dirs ... grep for HARD_I2C in u-boot
source (one Goal is to get rid of HARD_I2C).

./arch/powerpc/cpu/mpc8xx/i2c.c
./arch/powerpc/cpu/mpc8260/commproc.c
./arch/powerpc/cpu/mpc8260/i2c.c
./arch/powerpc/cpu/mpc5xxx/i2c.c
./arch/powerpc/cpu/mpc824x/drivers/i2c/i2c.c
./arch/powerpc/cpu/mpc512x/i2c.c

[...]

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany