All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andreas Färber" <afaerber@suse.de>
To: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>, qemu-devel@nongnu.org
Cc: qemu-ppc@nongnu.org, agraf@suse.de
Subject: Re: [Qemu-devel] [PATCH v8] target-ppc: gdbstub allow byte swapping for reading/writing registers
Date: Sat, 05 Apr 2014 16:51:38 +0200	[thread overview]
Message-ID: <5340187A.1080201@suse.de> (raw)
In-Reply-To: <1396642998-4491-1-git-send-email-tlfalcon@linux.vnet.ibm.com>

Am 04.04.2014 22:23, schrieb Thomas Falcon:
> This patch allows registers to be properly read from and written to
> when using the gdbstub to debug a ppc guest running in little
> endian mode.  It accomplishes this goal by byte swapping the values of
> any registers if the MSR:LE value is set.
> 
> Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
> ---
> Differences for v7:
> 
> Inlined the register_read() and register_write() wrapper functions
> ---
>  target-ppc/cpu-qom.h |   1 +
>  target-ppc/gdbstub.c | 125 +++++++++++++++++++++++++++++++++++++--------------
>  2 files changed, 92 insertions(+), 34 deletions(-)
> 
> diff --git a/target-ppc/cpu-qom.h b/target-ppc/cpu-qom.h
> index 47dc8e6..aab4977 100644
> --- a/target-ppc/cpu-qom.h
> +++ b/target-ppc/cpu-qom.h
> @@ -111,6 +111,7 @@ void ppc_cpu_dump_state(CPUState *cpu, FILE *f, fprintf_function cpu_fprintf,
>                          int flags);
>  void ppc_cpu_dump_statistics(CPUState *cpu, FILE *f,
>                               fprintf_function cpu_fprintf, int flags);
> +void ppc_cpu_gdb_swap_register(uint8_t *buf, int reg, int len);

This is only ever used in gdbstub.c. Can we please keep it static there
to avoid a full ppc*-softmmu rebuild?

>  hwaddr ppc_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
>  int ppc_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg);
>  int ppc_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
> diff --git a/target-ppc/gdbstub.c b/target-ppc/gdbstub.c
> index 1c91090..594dd08 100644
> --- a/target-ppc/gdbstub.c
> +++ b/target-ppc/gdbstub.c
> @@ -21,6 +21,58 @@
>  #include "qemu-common.h"
>  #include "exec/gdbstub.h"
>  
> +static int ppc_cpu_gdb_register_len(int n)

Nitpick: Since these two functions do not operate on the CPU, you could
just use ppc_gdb_* rather than ppc_cpu_gdb_*.

> +{
> +    switch (n) {
> +    case 0 ... 31:
> +        /* gprs */
> +        return sizeof(target_ulong);
> +    case 32 ... 63:
> +        /* fprs */
> +        if (gdb_has_xml) {
> +            return 0;
> +        }
> +        return 8;
> +    case 66:
> +        /* cr */
> +        return 4;
> +    case 64:
> +        /* nip */
> +    case 65:
> +        /* msr */
> +    case 67:
> +        /* lr */
> +    case 68:
> +        /* ctr */
> +    case 69:
> +        /* xer */
> +        return sizeof(target_ulong);
> +    case 70:
> +        /* fpscr */
> +        if (gdb_has_xml) {
> +            return 0;
> +        }
> +        return sizeof(target_ulong);
> +    default:
> +        return 0;
> +    }
> +}
> +
> +
> +/* The following functions are used to ensure the correct
> + * transfer of registers between a little endian ppc target
> + * and a big endian host by checking the LE bit in the Machine State Register
> + */
> +
> +void ppc_cpu_gdb_swap_register(uint8_t *mem_buf, int n, int len)
> +{
> +    if (len == 4) {
> +        bswap32s((uint32_t *)mem_buf);
> +    } else {
> +        bswap64s((uint64_t *)mem_buf);
> +    }

This logic assumes that len can only be either 4 or 8. Please use an
explicit len == 8 comparison and g_assert_not_reached() on unhandled len
values.

> +}
> +
>  /* Old gdb always expects FP registers.  Newer (xml-aware) gdb only
>   * expects whatever the target description contains.  Due to a
>   * historical mishap the FP registers appear in between core integer
> @@ -32,23 +84,26 @@ int ppc_cpu_gdb_read_register(CPUState *cs, uint8_t *mem_buf, int n)
>  {
>      PowerPCCPU *cpu = POWERPC_CPU(cs);
>      CPUPPCState *env = &cpu->env;
> +    int r = ppc_cpu_gdb_register_len(n);
> +
> +    if (!r) {
> +        return r;
> +    }
>  
>      if (n < 32) {
>          /* gprs */
> -        return gdb_get_regl(mem_buf, env->gpr[n]);
> +        gdb_get_regl(mem_buf, env->gpr[n]);
>      } else if (n < 64) {
>          /* fprs */
> -        if (gdb_has_xml) {
> -            return 0;
> -        }

I stumbled over dropping this not being related to Little Endian or
being mentioned in the commit message. Maybe mention that this is
replaced by ..._register_len() and returning early?

Otherwise looking much more to my taste now. :)

Regards,
Andreas

>          stfq_p(mem_buf, env->fpr[n-32]);
> -        return 8;
>      } else {
>          switch (n) {
>          case 64:
> -            return gdb_get_regl(mem_buf, env->nip);
> +            gdb_get_regl(mem_buf, env->nip);
> +            break;
>          case 65:
> -            return gdb_get_regl(mem_buf, env->msr);
> +            gdb_get_regl(mem_buf, env->msr);
> +            break;
>          case 66:
>              {
>                  uint32_t cr = 0;
> @@ -56,50 +111,55 @@ int ppc_cpu_gdb_read_register(CPUState *cs, uint8_t *mem_buf, int n)
>                  for (i = 0; i < 8; i++) {
>                      cr |= env->crf[i] << (32 - ((i + 1) * 4));
>                  }
> -                return gdb_get_reg32(mem_buf, cr);
> +                gdb_get_reg32(mem_buf, cr);
> +                break;
>              }
>          case 67:
> -            return gdb_get_regl(mem_buf, env->lr);
> +            gdb_get_regl(mem_buf, env->lr);
> +            break;
>          case 68:
> -            return gdb_get_regl(mem_buf, env->ctr);
> +            gdb_get_regl(mem_buf, env->ctr);
> +            break;
>          case 69:
> -            return gdb_get_regl(mem_buf, env->xer);
> +            gdb_get_regl(mem_buf, env->xer);
> +            break;
>          case 70:
> -            {
> -                if (gdb_has_xml) {
> -                    return 0;
> -                }
> -                return gdb_get_reg32(mem_buf, env->fpscr);
> -            }
> +            gdb_get_reg32(mem_buf, env->fpscr);
> +            break;
>          }
>      }
> -    return 0;
> +    if (msr_le) {
> +        ppc_cpu_gdb_swap_register(mem_buf, n, r);
> +    }
> +    return r;
>  }
>  
>  int ppc_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
>  {
>      PowerPCCPU *cpu = POWERPC_CPU(cs);
>      CPUPPCState *env = &cpu->env;
> +    int r = ppc_cpu_gdb_register_len(n);
>  
> +    if (!r) {
> +        return r;
> +    }
> +    if (msr_le) {
> +        ppc_cpu_gdb_swap_register(mem_buf, n, r);
> +    }
>      if (n < 32) {
>          /* gprs */
>          env->gpr[n] = ldtul_p(mem_buf);
> -        return sizeof(target_ulong);
>      } else if (n < 64) {
>          /* fprs */
> -        if (gdb_has_xml) {
> -            return 0;
> -        }
>          env->fpr[n-32] = ldfq_p(mem_buf);
> -        return 8;
>      } else {
>          switch (n) {
>          case 64:
>              env->nip = ldtul_p(mem_buf);
> -            return sizeof(target_ulong);
> +            break;
>          case 65:
>              ppc_store_msr(env, ldtul_p(mem_buf));
> -            return sizeof(target_ulong);
> +            break;
>          case 66:
>              {
>                  uint32_t cr = ldl_p(mem_buf);
> @@ -107,25 +167,22 @@ int ppc_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
>                  for (i = 0; i < 8; i++) {
>                      env->crf[i] = (cr >> (32 - ((i + 1) * 4))) & 0xF;
>                  }
> -                return 4;
> +                break;
>              }
>          case 67:
>              env->lr = ldtul_p(mem_buf);
> -            return sizeof(target_ulong);
> +            break;
>          case 68:
>              env->ctr = ldtul_p(mem_buf);
> -            return sizeof(target_ulong);
> +            break;
>          case 69:
>              env->xer = ldtul_p(mem_buf);
> -            return sizeof(target_ulong);
> +            break;
>          case 70:
>              /* fpscr */
> -            if (gdb_has_xml) {
> -                return 0;
> -            }
>              store_fpscr(env, ldtul_p(mem_buf), 0xffffffff);
> -            return sizeof(target_ulong);
> +            break;
>          }
>      }
> -    return 0;
> +    return r;
>  }
> 


-- 
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg

  reply	other threads:[~2014-04-05 14:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-04 20:23 [Qemu-devel] [PATCH v8] target-ppc: gdbstub allow byte swapping for reading/writing registers Thomas Falcon
2014-04-05 14:51 ` Andreas Färber [this message]
2014-04-05 14:55   ` Alexander Graf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5340187A.1080201@suse.de \
    --to=afaerber@suse.de \
    --cc=agraf@suse.de \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    --cc=tlfalcon@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.