All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
To: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v3 4/6] v4l: vsp1: Add DT support
Date: Tue, 08 Apr 2014 18:26:58 +0200	[thread overview]
Message-ID: <53442352.5050809@samsung.com> (raw)
In-Reply-To: <1396973775-5690-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Hi Laurent,

On 08/04/14 18:16, Laurent Pinchart wrote:

It may be worth to split DT binding documentation and the driver changes
into separate patches, and perhaps add some commit description here.
Either way fell free to stick:

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
>
> ---
>  .../devicetree/bindings/media/renesas,vsp1.txt     | 43 ++++++++++++++++++
>  drivers/media/platform/vsp1/vsp1_drv.c             | 52 ++++++++++++++++++----
>  2 files changed, 87 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/renesas,vsp1.txt
> 
> Hi,
> 
> This is the second last call (I'm perfectly aware of the logic flaw in this
> sentence, thank you :-)) for DT bindings review, with a small change to the
> bindings wording compared to v2. I plan to send a pull request at the end of
> the week.
> 
> Changes since v2:
> 
> - Remove the interrupt-parent property
> - Drop of_match_ptr() as the table is always compiled in
> 
> Changes since v1:
> 
> - Drop the clock-names property, as the VSP1 uses a single clock
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> new file mode 100644
> index 0000000..87fe08a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> @@ -0,0 +1,43 @@
> +* Renesas VSP1 Video Processing Engine
> +
> +The VSP1 is a video processing engine that supports up-/down-scaling, alpha
> +blending, color space conversion and various other image processing features.
> +It can be found in the Renesas R-Car second generation SoCs.
> +
> +Required properties:
> +
> +  - compatible: Must contain "renesas,vsp1"
> +
> +  - reg: Base address and length of the registers block for the VSP1.
> +  - interrupts: VSP1 interrupt specifier.
> +  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
> +
> +  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
> +  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
> +  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
> +
> +
> +Optional properties:
> +
> +  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
> +    available.
> +  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
> +    available.
> +  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
> +    module is available.
> +
> +
> +Example: R8A7790 (R-Car H2) VSP1-S node
> +
> +	vsp1@fe928000 {
> +		compatible = "renesas,vsp1";
> +		reg = <0 0xfe928000 0 0x8000>;
> +		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
> +
> +		renesas,has-lut;
> +		renesas,has-sru;
> +		renesas,#rpf = <5>;
> +		renesas,#uds = <3>;
> +		renesas,#wpf = <4>;
> +	};
> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
> index 28e1de3..c69ee06 100644
> --- a/drivers/media/platform/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/vsp1/vsp1_drv.c
> @@ -16,6 +16,7 @@
>  #include <linux/device.h>
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
> +#include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/videodev2.h>
>  
> @@ -431,34 +432,59 @@ static const struct dev_pm_ops vsp1_pm_ops = {
>   * Platform Driver
>   */
>  
> -static struct vsp1_platform_data *
> -vsp1_get_platform_data(struct platform_device *pdev)
> +static int vsp1_validate_platform_data(struct platform_device *pdev,
> +				       struct vsp1_platform_data *pdata)
>  {
> -	struct vsp1_platform_data *pdata = pdev->dev.platform_data;
> -
>  	if (pdata == NULL) {
>  		dev_err(&pdev->dev, "missing platform data\n");
> -		return NULL;
> +		return -EINVAL;
>  	}
>  
>  	if (pdata->rpf_count <= 0 || pdata->rpf_count > VPS1_MAX_RPF) {
>  		dev_err(&pdev->dev, "invalid number of RPF (%u)\n",
>  			pdata->rpf_count);
> -		return NULL;
> +		return -EINVAL;
>  	}
>  
>  	if (pdata->uds_count <= 0 || pdata->uds_count > VPS1_MAX_UDS) {
>  		dev_err(&pdev->dev, "invalid number of UDS (%u)\n",
>  			pdata->uds_count);
> -		return NULL;
> +		return -EINVAL;
>  	}
>  
>  	if (pdata->wpf_count <= 0 || pdata->wpf_count > VPS1_MAX_WPF) {
>  		dev_err(&pdev->dev, "invalid number of WPF (%u)\n",
>  			pdata->wpf_count);
> -		return NULL;
> +		return -EINVAL;
>  	}
>  
> +	return 0;
> +}
> +
> +static struct vsp1_platform_data *
> +vsp1_get_platform_data(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct vsp1_platform_data *pdata;
> +
> +	if (!IS_ENABLED(CONFIG_OF) || np == NULL)
> +		return pdev->dev.platform_data;
> +
> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (pdata == NULL)
> +		return NULL;
> +
> +	if (of_property_read_bool(np, "renesas,has-lif"))
> +		pdata->features |= VSP1_HAS_LIF;
> +	if (of_property_read_bool(np, "renesas,has-lut"))
> +		pdata->features |= VSP1_HAS_LUT;
> +	if (of_property_read_bool(np, "renesas,has-sru"))
> +		pdata->features |= VSP1_HAS_SRU;
> +
> +	of_property_read_u32(np, "renesas,#rpf", &pdata->rpf_count);
> +	of_property_read_u32(np, "renesas,#uds", &pdata->uds_count);
> +	of_property_read_u32(np, "renesas,#wpf", &pdata->wpf_count);
> +
>  	return pdata;
>  }
>  
> @@ -481,6 +507,10 @@ static int vsp1_probe(struct platform_device *pdev)
>  	if (vsp1->pdata == NULL)
>  		return -ENODEV;
>  
> +	ret = vsp1_validate_platform_data(pdev, vsp1->pdata);
> +	if (ret < 0)
> +		return ret;
> +
>  	/* I/O, IRQ and clock resources */
>  	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	vsp1->mmio = devm_ioremap_resource(&pdev->dev, io);
> @@ -527,6 +557,11 @@ static int vsp1_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct of_device_id vsp1_of_match[] = {
> +	{ .compatible = "renesas,vsp1" },
> +	{ },
> +};
> +
>  static struct platform_driver vsp1_platform_driver = {
>  	.probe		= vsp1_probe,
>  	.remove		= vsp1_remove,
> @@ -534,6 +569,7 @@ static struct platform_driver vsp1_platform_driver = {
>  		.owner	= THIS_MODULE,
>  		.name	= "vsp1",
>  		.pm	= &vsp1_pm_ops,
> +		.of_match_table = vsp1_of_match,
>  	},
>  };

--
Regards,
Sylwester

  reply	other threads:[~2014-04-08 16:26 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-05 19:23 [PATCH 0/6] VSP1 Blend/ROP Unit and DT support Laurent Pinchart
2014-03-05 19:23 ` Laurent Pinchart
2014-03-05 19:23 ` [PATCH 1/6] v4l: vsp1: Support multi-input entities Laurent Pinchart
2014-03-05 19:23   ` Laurent Pinchart
2014-03-05 19:24 ` [PATCH 2/6] v4l: vsp1: Add BRU support Laurent Pinchart
2014-03-05 19:24   ` Laurent Pinchart
2014-03-05 19:24 ` [PATCH 3/6] v4l: vsp1: uds: Enable scaling of alpha layer Laurent Pinchart
2014-03-05 19:24   ` Laurent Pinchart
2014-03-05 19:24 ` [PATCH 4/6] v4l: vsp1: Add DT support Laurent Pinchart
2014-03-05 19:24   ` Laurent Pinchart
2014-03-05 19:24 ` [PATCH 5/6] ARM: shmobile: r8a7790: Add VSP1 devices to DT Laurent Pinchart
2014-03-05 19:24   ` Laurent Pinchart
2014-03-05 19:24 ` [PATCH 6/6] ARM: shmobile: r8a7791: " Laurent Pinchart
2014-03-05 19:24   ` Laurent Pinchart
2014-03-05 19:30 ` [PATCH 4/6] v4l: vsp1: Add DT support Laurent Pinchart
2014-03-05 19:30   ` Laurent Pinchart
2014-03-25 12:18   ` Laurent Pinchart
2014-03-25 12:18     ` Laurent Pinchart
2014-04-10 23:04     ` Simon Horman
2014-04-10 23:04       ` Simon Horman
2014-04-10 23:37       ` Laurent Pinchart
2014-04-10 23:37         ` Laurent Pinchart
2014-04-11  0:04         ` Simon Horman
2014-04-11  0:04           ` Simon Horman
2014-04-08 16:16   ` [PATCH v3 " Laurent Pinchart
2014-04-08 16:26     ` Sylwester Nawrocki [this message]
2014-04-08 16:46   ` [PATCH v4 4.1/6] v4l: vsp1: Add DT bindings documentation Laurent Pinchart
2014-04-08 16:47   ` [PATCH v4 4.2/6] v4l: vsp1: Add DT support Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53442352.5050809@samsung.com \
    --to=s.nawrocki@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.