From: Gui Iribarren <gui@altermundi.net>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] can batctl ping but not ping in 2014.1.0
Date: Tue, 08 Apr 2014 15:34:37 -0300 [thread overview]
Message-ID: <5344413D.6000003@altermundi.net> (raw)
In-Reply-To: <5344388B.7020907@altermundi.net>
On 04/08/2014 02:57 PM, Gui Iribarren wrote:
> Hello again friendly devs,
> here we are, after a long "running stable" hiatus, back into the
> bleeding edge for a ride \o/
>
> running a small cloud of recent openwrt trunk (r40361)
> (OT: kmod-ath9k is running suprisingly smooth! yay!!)
> with kmod-batman-adv - 3.10.34+2014.1.0-2
>
> and, well... i have bat news :P
> 1) yesterday i saw something vaguely reminiscent to the old OGM starving
> issue: in a line of 4 guinea-pig nodes that flow through a river of
> DeltaLibre, the 4th node would get TQ=1 for the 1st node, and would not
> even ping it (i can't remember the result of batctl ping, maybe it did),
> even though the links were really solid (TQ>220 on every one-hop-link of
> the chain)
> (the 3rd node was seeing the 1st with TQ>200, and could batctl ping /
> ping perfectly)
> at that point i found out kmod-batman-adv was inadvertently compiled
> without log support :( so that's as much as i can report for now, i'll
> recompile with that enabled and follow up.
>
> 2) this morning, in 2-node cloud testbed at home, uptime=22hs, The
> Bizarre Behaviour showed up and is sharing breakfast with me.
>
> on one side, lying calmly on the floor...
>
> root@rockm5:~# batctl o
> [B.A.T.M.A.N. adv 2014.1.0, MainIF/MAC: wlan0_adhoc.11/dc:9f:db:9c:37:54
> (bat0 BATMAN_IV)]
> Originator last-seen (#/255) Nexthop [outgoingIF]:
> Potential nexthops ...
> 64:70:02:ed:f8:ea 0.770s (255) 64:70:02:ed:f8:ea [wlan0_adhoc.11]:
> 64:70:02:ed:f8:ea (255)
> 02:00:49:ed:f8:e8 0.320s (255) 64:70:02:ed:f8:ea [wlan0_adhoc.11]:
> 64:70:02:ed:f8:ea (255)
> root@rockm5:~# batctl if
> wlan0_adhoc.11: active
>
> 2 meters away, a TL-WDR3600 lurks...
>
> root@planit:~# batctl o
> [B.A.T.M.A.N. adv 2014.1.0, MainIF/MAC: eth0.1.11/02:00:49:ed:f8:e8
> (bat0 BATMAN_IV)]
> Originator last-seen (#/255) Nexthop [outgoingIF]:
> Potential nexthops ...
> dc:9f:db:9c:37:54 0.360s (255) dc:9f:db:9c:37:54 [wlan1_adhoc.11]:
> dc:9f:db:9c:37:54 (255)
> root@planit:~# batctl if
> eth0.1.11: active
> wlan1_adhoc.11: active
> wlan0_adhoc.11: active
>
> ### rockm5 global ip over br-lan: gave its last breath
> root@planit:~# ip -6 r get 2a00:1508:1:f804::9d:3754/64
> 2a00:1508:1:f804::9d:3754 from :: dev br-lan src
> 2a00:1508:1:f804::ed:f8e8 metric 0
> root@planit:~# ping 2a00:1508:1:f804::9d:3754
> PING 2a00:1508:1:f804::9d:3754 (2a00:1508:1:f804::9d:3754): 56 data bytes
> --- 2a00:1508:1:f804::9d:3754 ping statistics ---
> 4 packets transmitted, 0 packets received, 100% packet loss
>
> ### rockm5 link-local over br-lan: feeding the daisies
> root@planit:~# ping6 fe80::de9f:dbff:fe9d:3754%br-lan
> PING fe80::de9f:dbff:fe9d:3754%br-lan(fe80::de9f:dbff:fe9d:3754) 56 data
> bytes
> --- fe80::de9f:dbff:fe9d:3754%br-lan ping statistics ---
> 3 packets transmitted, 0 received, 100% packet loss, time 2001ms
>
> ### lower level link-local works fine (avoiding batman-adv)
> root@planit:~# ping6 fe80::de9f:dbff:fe9c:3754%wlan1_adhoc.11
> PING fe80::de9f:dbff:fe9c:3754%wlan1_adhoc.11(fe80::de9f:dbff:fe9c:3754)
> 56 data bytes
> 64 bytes from fe80::de9f:dbff:fe9c:3754: icmp_seq=1 ttl=64 time=2.70 ms
> 64 bytes from fe80::de9f:dbff:fe9c:3754: icmp_seq=2 ttl=64 time=1.39 ms
> --- fe80::de9f:dbff:fe9c:3754%wlan1_adhoc.11 ping statistics ---
> 2 packets transmitted, 2 received, 0% packet loss, time 1001ms
> rtt min/avg/max/mdev = 1.398/2.053/2.708/0.655 ms
>
> ### batctl ping to rockm5 enjoys excellent health
> root@planit:~# batctl ping dc:9f:db:9c:37:54
> PING dc:9f:db:9c:37:54 (dc:9f:db:9c:37:54) 20(48) bytes of data
> 20 bytes from dc:9f:db:9c:37:54 icmp_seq=1 ttl=50 time=1.16 ms
> 20 bytes from dc:9f:db:9c:37:54 icmp_seq=2 ttl=50 time=0.90 ms
> 20 bytes from dc:9f:db:9c:37:54 icmp_seq=3 ttl=50 time=0.90 ms
> ^C--- dc:9f:db:9c:37:54 ping statistics ---
> 3 packets transmitted, 3 received, 0% packet loss
> rtt min/avg/max/mdev = 0.902/0.989/1.162/0.122 ms
>
>
> well, as said before, i have no "batctl l" output to show, but will
> collect and write chapter two.
> With a bit of luck, what i described so far rings a bell on someone, and
> can give an early insight
> (maybe it's due to the way we are using vlans?)
Mh... speaking of which, maybe there's something TT-fishy about vlans?
root@rockm5:~# batctl tl
Locally retrieved addresses (from bat0) announced via TT (TTVN: 2):
Client VID Flags Last seen (CRC )
* rockm5_br-lan -1 [......] 3.220 (0xbfe4b7db)
* rockm5_bat0 -1 [.P....] 0.000 (0xbfe4b7db)
* rockm5_bat0 0 [.P....] 0.000 (0x453da959)
root@rockm5:~# batctl tg
Globally announced TT entries received via the mesh bat0
Client VID (TTVN) Originator (Curr TTVN) (CRC ) Flags
* planit_bat0 -1 ( 2) via planit_eth0.1.11 ( 2) (0x8f4039e4) [....]
* planit_bat0 0 ( 2) via planit_eth0.1.11 ( 2) (0x29283c0f) [....]
root@planit:~# batctl tl
Locally retrieved addresses (from bat0) announced via TT (TTVN: 2):
Client VID Flags Last seen (CRC )
* planit_bat0 -1 [.P....] 0.000 (0x8f4039e4)
* planit_bat0 0 [.P....] 0.000 (0x29283c0f)
root@planit:~# batctl tg
Globally announced TT entries received via the mesh bat0
Client VID (TTVN) Originator (Curr TTVN) (CRC ) Flags
* rockm5_br-lan -1 ( 2) via rockm5_wlan0_adhoc ( 2) (0xbfe4b7db) [....]
* rockm5_bat0 -1 ( 1) via rockm5_wlan0_adhoc ( 2) (0xbfe4b7db) [....]
* rockm5_bat0 0 ( 2) via rockm5_wlan0_adhoc ( 2) (0x453da959) [....]
i understand vid -1 means "no tag"... but then, what's vid=0 then?
relevant bat-hosts
dc:9f:db:9d:37:54 rockm5_br-lan
96:65:b0:4c:6b:44 rockm5_bat0
dc:9f:db:9c:37:54 rockm5_wlan0_adhoc
92:5c:d9:b1:8f:df planit_bat0
02:00:49:ed:f8:e8 planit_eth0.1.11
> (maybe its because routing_algo = BATMAN_IV?)
> (maybe the rewritten code is designed to work this way? yay!)
> (maybe it's our ugly hacky ebtables droppings / anygw magic that are
> interacting badly in some way? can describe them in detail next time)
>
> i must say tho, that this was running fine yesterday, and it broke
> spontaneously without any manual intervention or config change.
>
> oh, BLA2 and DAT are disabled on all nodes.
>
> thanks as always,
> and hope a giggle cheers up your day :)
>
> gui
prev parent reply other threads:[~2014-04-08 18:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-08 17:57 [B.A.T.M.A.N.] can batctl ping but not ping in 2014.1.0 Gui Iribarren
2014-04-08 18:34 ` Gui Iribarren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5344413D.6000003@altermundi.net \
--to=gui@altermundi.net \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.