From: Nishanth Menon <nm@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>, "Balbi, Felipe" <balbi@ti.com>,
Sourav Poddar <sourav.poddar@ti.com>
Subject: AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg..
Date: Wed, 9 Apr 2014 07:41:21 -0500 [thread overview]
Message-ID: <53453FF1.60803@ti.com> (raw)
Hi,
http://slexy.org/raw/s2pkLsiFBX
I noticed the following sets of warnings with omap2plus_defconfig on
next-20140409. As per older logs, next-20140401 had it and v3.14 tag
also had it (I have'nt retained older logs).
[ 0.226189] ------------[ cut here ]------------
[ 0.226258] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.226277] omap_hwmod: qspi: doesn't have mpu register target base
[ 0.226290] Modules linked in:
[ 0.226317] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.226389] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.226441] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.226478] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.226504] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.226535] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.226569] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.226598] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.226624] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.226659] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.226687] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.226721] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.226930] ---[ end trace 6ef0f5570cfcc358 ]---
[ 0.264599] omap_hwmod: tptc0 using broken dt data from edma
[ 0.265247] omap_hwmod: tptc1 using broken dt data from edma
[ 0.265871] omap_hwmod: tptc2 using broken dt data from edma
[ 0.274961] ------------[ cut here ]------------
[ 0.275029] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.275048] omap_hwmod: usb_otg_ss0: doesn't have mpu register
target base
[ 0.275058] Modules linked in:
[ 0.275087] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.275158] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.275209] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.275248] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.275274] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.275307] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.275344] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.275376] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.275405] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.275440] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.275468] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.275501] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.275517] ---[ end trace 6ef0f5570cfcc359 ]---
[ 0.276726] ------------[ cut here ]------------
[ 0.276777] WARNING: CPU: 0 PID: 1 at
arch/arm/mach-omap2/omap_hwmod.c:2538 _init+0x1c0/0x3e0()
[ 0.276791] omap_hwmod: usb_otg_ss1: doesn't have mpu register
target base
[ 0.276802] Modules linked in:
[ 0.276826] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W
3.14.0-next-20140409-00006-g0fbfc2e #1
[ 0.276891] [<c0014cd0>] (unwind_backtrace) from [<c001195c>]
(show_stack+0x10/0x14)
[ 0.276938] [<c001195c>] (show_stack) from [<c053cf68>]
(dump_stack+0x78/0x94)
[ 0.276974] [<c053cf68>] (dump_stack) from [<c003fc20>]
(warn_slowpath_common+0x6c/0x8c)
[ 0.276999] [<c003fc20>] (warn_slowpath_common) from [<c003fcd4>]
(warn_slowpath_fmt+0x30/0x40)
[ 0.277030] [<c003fcd4>] (warn_slowpath_fmt) from [<c07a0b70>]
(_init+0x1c0/0x3e0)
[ 0.277064] [<c07a0b70>] (_init) from [<c0028068>]
(omap_hwmod_for_each+0x34/0x5c)
[ 0.277095] [<c0028068>] (omap_hwmod_for_each) from [<c07a12e8>]
(__omap_hwmod_setup_all+0x24/0x40)
[ 0.277121] [<c07a12e8>] (__omap_hwmod_setup_all) from
[<c0008ab8>] (do_one_initcall+0x34/0x15c)
[ 0.277158] [<c0008ab8>] (do_one_initcall) from [<c0794bf4>]
(kernel_init_freeable+0xfc/0x1cc)
[ 0.277186] [<c0794bf4>] (kernel_init_freeable) from [<c05378fc>]
(kernel_init+0x8/0xe4)
[ 0.277219] [<c05378fc>] (kernel_init) from [<c000e6e8>]
(ret_from_fork+0x14/0x2c)
[ 0.277234] ---[ end trace 6ef0f5570cfcc35a ]---
--
Regards,
Nishanth Menon
next reply other threads:[~2014-04-09 12:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 12:41 Nishanth Menon [this message]
2014-04-09 12:50 ` AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Roger Quadros
2014-04-09 12:55 ` sourav
2014-04-09 13:15 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Nishanth Menon
2014-04-09 13:25 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53453FF1.60803@ti.com \
--to=nm@ti.com \
--cc=balbi@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=sourav.poddar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.