From: Nishanth Menon <nm@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>,
Roger Quadros <rogerq@ti.com>, "Balbi, Felipe" <balbi@ti.com>,
Sourav Poddar <sourav.poddar@ti.com>
Subject: omap based boards (next-20140409-omap2plus_defconfig) - boot time warning:
Date: Wed, 9 Apr 2014 08:15:47 -0500 [thread overview]
Message-ID: <53454803.3090703@ti.com> (raw)
In-Reply-To: <53453FF1.60803@ti.com>
On 04/09/2014 07:41 AM, Nishanth Menon wrote:
> Hi,
> http://slexy.org/raw/s2pkLsiFBX
>
> I noticed the following sets of warnings with omap2plus_defconfig on
> next-20140409. As per older logs, next-20140401 had it and v3.14 tag
> also had it (I have'nt retained older logs).
>
Here is a quick list of 20 odd boards I am testing with:
next-20140409-omap2plus_defconfig
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2Ho7WPbaZ
omap_hwmod: tptc* using broken dt data from edma
platform 49000000.edma: alias fck already exists
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2A5ZJjsuZ
same for tptc, edma
3: am3517-evm: Boot PASS: http://slexy.org/raw/s20q8rTwCJ
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
Address Hole seen by USB_OTG at address dc0f9c0c
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_iva'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
4: am37x-evm: Boot PASS: http://slexy.org/raw/s21kcHKdyf
nothing interesting.
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s210geZKgS
platform 53701000.des: Cannot lookup hwmod 'des'
platform 49000000.edma: alias fck already exists
the usb and qspi issue reported.
6: am43xx-gpevm: Boot FAIL: http://slexy.org/raw/s20t5JOyI4
known issue. (gpio reset for DDR)
7: BeagleBoard-XM: Boot PASS: http://slexy.org/raw/s2TXdBONNI
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
8: beagleboard-vanilla: Boot PASS: http://slexy.org/raw/s24pDuZ7S7
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
9: beaglebone-black: Boot PASS: http://slexy.org/raw/s21ztl1meX
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
10: beaglebone: Boot PASS: http://slexy.org/raw/s2a2JO9MVd
omap_hwmod: tptc0 using broken dt data from edma
omap_hwmod: tptc1 using broken dt data from edma
omap_hwmod: tptc2 using broken dt data from edma
omap_hwmod: debugss: _wait_target_disable failed
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
platform 49000000.edma: alias fck already exists
11: craneboard: Boot PASS: http://slexy.org/raw/s20xtW58E3
Address Hole seen by USB_OTG at address 4de96fbc
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: uart4: cannot be enabled for reset (3)
platform iva.2: Cannot lookup hwmod 'iva'
platform 480c5000.aes: Cannot lookup hwmod 'aes'
platform 48094000.mailbox: Cannot lookup hwmod 'mailbox'
platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp'
platform 480c3000.sham: Cannot lookup hwmod 'sham'
platform 480cb000.smartreflex: Cannot lookup hwmod 'smartreflex_core'
platform 480c9000.smartreflex: Cannot lookup hwmod 'smartreflex_mpu_iva'
platform 480ab000.usb_otg_hs: Cannot lookup hwmod 'usb_otg_hs'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
12: DRA7xx-EVM: Boot PASS: http://slexy.org/raw/s2TR2UyTxS
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: dss_core: _wait_target_disable failed
omap_hwmod: dss_core: cannot be enabled for reset (3)
omap_hwmod: dss_dispc: cannot be enabled for reset (3)
omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
platform 4e000000.dmm: Cannot lookup hwmod 'dmm'
omap_l3_noc 44000000.ocp: couldn't find resource 2
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
13: OMAP3430-Labrador(LDP): Boot PASS: http://slexy.org/raw/s21ZRwPGPg
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
omap-gpmc 6e000000.gpmc: GPMC revision 5.0
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
14: n900: Boot PASS: http://slexy.org/raw/s21oybPlxa
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: mcbsp2: cannot be enabled for reset (3)
rx51_video_init cannot configure MUX for LCD RESET
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
15: pandaboard-es: Boot PASS: http://slexy.org/raw/s2qoGzHvAL
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
16: pandaboard-vanilla: Boot PASS: http://slexy.org/raw/s21kH0Lsga
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
17: sdp2430: Boot PASS: http://slexy.org/raw/s206Fygl3J
omap_hwmod: usb_otg_hs: cannot be enabled for reset (3)
twl4030_keypad: probe of keypad.29 failed with error -2
18: sdp3430: Boot PASS: http://slexy.org/raw/s24cAq4vMt
omap_hwmod: ssi: doesn't have mpu register target base
omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
omap_hwmod: usb_host_hs: could not associate to clkdm l3_init_clkdm
omap_hwmod: usb_tll_hs: could not associate to clkdm l3_init_clkdm
gpmc_probe_nand_child: ti,elm-id property not found
gpmc_cs_program_settings: invalid width 0!
hw-breakpoint: debug architecture 0x4 unsupported.
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
twl4030_keypad: probe of keypad.28 failed with error -2
of_get_named_gpiod_flags: can't parse gpios property of node
'/ocp/mmc@4809c000[0]'
19: sdp4430: Boot PASS: http://slexy.org/raw/s2VTGsB5Zb
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
platform 4b501000.aes: Cannot lookup hwmod 'aes'
platform 480a5000.des: Cannot lookup hwmod 'des'
edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
20: OMAP5432uEVM: Boot PASS: http://slexy.org/raw/s21I4dKlfe
omap_hwmod: l3_main_3 using broken dt data from ocp
omap_hwmod: l3_main_2 using broken dt data from ocp
omap_hwmod: mailbox: doesn't have mpu register target base
platform 50000000.gpmc: Cannot lookup hwmod 'gpmc'
map-gpmc 50000000.gpmc: _od_fail_runtime_resume: FIXME: missing
hwmod/omap_dev info
TOTAL = 20 boards, Booted Boards = 19, No Boot boards = 1
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-04-09 13:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 12:41 AM437x-epos (next-20140409-omap2plus_defconfig) - boot time warning: qspi/otg Nishanth Menon
2014-04-09 12:50 ` Roger Quadros
2014-04-09 12:55 ` sourav
2014-04-09 13:15 ` Nishanth Menon [this message]
2014-04-09 13:25 ` omap based boards (next-20140409-omap2plus_defconfig) - boot time warning: Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53454803.3090703@ti.com \
--to=nm@ti.com \
--cc=balbi@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=rogerq@ti.com \
--cc=sourav.poddar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.