All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>,
	linux-pci@vger.kernel.org, netdev@vger.kernel.org,
	davem@davemloft.net
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Amir Vadai <amirv@mellanox.com>,
	Jack Morgenstein <jackm@dev.mellanox.co.il>,
	Or Gerlitz <ogerlitz@mellanox.com>
Subject: Re: [PATCH V2 net] net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()
Date: Sun, 13 Apr 2014 15:06:10 +0400	[thread overview]
Message-ID: <534A6FA2.90800@cogentembedded.com> (raw)
In-Reply-To: <1397359333-8378-1-git-send-email-weiyang@linux.vnet.ibm.com>

Hello.

On 13-04-2014 7:22, Wei Yang wrote:

> pci_match_id() just match the static pci_device_id, which may return NULL if
> someone binds the driver to a device manually using
> /sys/bus/pci/drivers/.../new_id.

> This patch wrap up a helper function __mlx4_remove_one() which does the tear
> down function but preserve the drv_data. Functions like
> mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out
> releasing drvdata.

> Fixes: 97a5221 "net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset".

> CC: Bjorn Helgaas <bhelgaas@google.com>
> CC: Amir Vadai <amirv@mellanox.com>
> CC: Jack Morgenstein <jackm@dev.mellanox.co.il>
> CC: Or Gerlitz <ogerlitz@mellanox.com>
> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>

[...]

> diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
> index f0ae95f..b6d60e2 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/main.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/main.c
[...]
> @@ -2604,85 +2598,112 @@ err_disable_pdev:
>
>   static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
>   {
> +	struct mlx4_priv *priv;
> +	struct mlx4_dev *dev;
> +
>   	printk_once(KERN_INFO "%s", mlx4_version);
>
> +	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> +	if (!priv) {
> +		return -ENOMEM;
> +	}

    {} not needed here.

[...]
> +	/* in SRIOV it is not allowed to unload the pf's
> +	 * driver while there are alive vf's */
> +	if (mlx4_is_master(dev)) {
> +		if (mlx4_how_many_lives_vf(dev))

    Could be folded into single *if*.

> +			printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
> +	}
> +	mlx4_stop_sense(dev);
> +	mlx4_unregister_device(dev);
[...]
> +	for (p = 1; p <= dev->caps.num_ports; p++) {
> +		mlx4_cleanup_port_info(&priv->port[p]);
> +		mlx4_CLOSE_PORT(dev, p);
> +	}
> +
> +	if (mlx4_is_master(dev))
> +		mlx4_free_resource_tracker(dev,
> +				   RES_TR_FREE_SLAVES_ONLY);

    Please re-align this line so that it starts right under 'dev'.

[...]
>
> -		if (!mlx4_is_slave(dev))
> -			mlx4_free_ownership(dev);
> +	if (mlx4_is_master(dev))
> +		mlx4_free_resource_tracker(dev,
> +				   RES_TR_FREE_STRUCTS_ONLY);

    Likewise.

[...]
> @@ -2755,11 +2776,13 @@ static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
>
>   static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev)
>   {
> -	const struct pci_device_id *id;
> -	int ret;
> +	struct mlx4_dev	 *dev  = pci_get_drvdata(pdev);
> +	struct mlx4_priv *priv = mlx4_priv(dev);
> +	int		  pci_dev_data;

    Doesn't seem that this variable is necessary.

> +	int               ret;
>
> -	id = pci_match_id(mlx4_pci_table, pdev);
> -	ret = __mlx4_init_one(pdev, id->driver_data);
> +	pci_dev_data = priv->pci_dev_data;
> +	ret = __mlx4_init_one(pdev, pci_dev_data);
>
>   	return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
>   }
[...]

WBR, Sergei


  reply	other threads:[~2014-04-13 11:05 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-13  3:22 [PATCH V2 net] net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one() Wei Yang
2014-04-13 11:06 ` Sergei Shtylyov [this message]
2014-04-14  1:50   ` Wei Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=534A6FA2.90800@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=amirv@mellanox.com \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=jackm@dev.mellanox.co.il \
    --cc=linux-pci@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=ogerlitz@mellanox.com \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.