From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <534B8FA4.9070102@xenomai.org> Date: Mon, 14 Apr 2014 09:35:00 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <534B8AA0.50203@xenomai.org> In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] Command line freeze during xeno-regression-test on omap4460 List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Andreas Glatz Cc: xenomai@xenomai.org On 04/14/2014 09:24 AM, Andreas Glatz wrote: > > On 14 Apr 2014, at 08:13, Gilles Chanteperdrix wrote: > >> On 01/06/2014 04:30 PM, Andreas Glatz wrote: >>> Hi, >>> >>> I managed to produce a kernel (v3.8.13) with xenomai 2.6.3 ipipe >>> patch and >>> rootfs (debian wheezy) with xenomai 2.6.3 libraries for my >>> Pandaboard ES >>> (omap4460). The simple regression test, which only calls dd during >>> the >>> switchtest, works fine. However the regression test with the linux >>> test >>> project (ltp-full-20130904) scripts causes some sort of system lock >>> up. >>> After that I only can ctrl-c xeno-regression-test (i.e. >>> switchtest), which, >>> however, doesn't help to regain console access (neigher over >>> ethernet nor >>> serial). >> >> Hi, >> >> I finally ran some tests with SD card: I booted my pandaboard using >> NFS >> as usual, but ran the xeno-test script passing the mount point of >> the SD >> card to dohell's -m option. And I could not reproduce any issue. The >> kernel I used is 3.14, the configuration is omap2plus_defconfig. >> > > OK, brilliant. I'll give that a try. I'm assuming that you tested with > the git tag 'raw/ipipe-3.14.0' ? It is a branch actually, but yes. -- Gilles.