From: it-support <it@sca-uk.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: stoth@kernellabs.com
Subject: Re: [PATCH] cx23885: add support for Hauppauge ImpactVCB-e
Date: Tue, 15 Apr 2014 11:41:25 +0100 [thread overview]
Message-ID: <534D0CD5.3090906@sca-uk.com> (raw)
In-Reply-To: <534BE92F.3010501@xs4all.nl>
Hi Guys,
This is a very noobie question, but my 'patch' command does not return
to the command prompt.
I assume that my problem is one (or all four) of:
1) the patch doesn't start or end where I think it does (I assume the
first line is
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
and the last line is:
#define GPIO_1 0x00000002
2) I have put it in the wrong directory (I tried:
~/linuxtv/media_build/linux/drivers/media/pci/cx23885/
and
~/linuxtv/media_build
3) My patch syntax is wrong. I run it in the same directory as the file
like this: patch -b cx23885.diff
4) I don't need to apply because Steve has already patched it into
linuxtv and I get it automaticallw when I build linux tv.
Regards
Steve
On 14/04/14 14:57, Hans Verkuil wrote:
> This patch adds support for the Hauppauge ImpactVCB-e card to cx23885.
>
> Tested with Composite input and S-Video.
>
> While I do get audio it is very choppy. It is not clear whether that is
> a general cx23885 driver problem or specific to this board. If it is specific
> to the board, then I might have missed something.
>
> Steven (Toth, not Cookson ;-) ), do you have an idea what it might be?
>
> Regards,
>
> Hans
>
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
> drivers/media/pci/cx23885/cx23885-cards.c | 30 +++++++++++++++++++++++++++++-
> drivers/media/pci/cx23885/cx23885-video.c | 1 +
> drivers/media/pci/cx23885/cx23885.h | 1 +
> 3 files changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
> index 79f20c8..49a3711 100644
> --- a/drivers/media/pci/cx23885/cx23885-cards.c
> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
> @@ -649,7 +649,25 @@ struct cx23885_board cx23885_boards[] = {
> CX25840_NONE1_CH3,
> .amux = CX25840_AUDIO6,
> } },
> - }
> + },
> + [CX23885_BOARD_HAUPPAUGE_IMPACTVCBE] = {
> + .name = "Hauppauge ImpactVCB-e",
> + .porta = CX23885_ANALOG_VIDEO,
> + .input = {{
> + .type = CX23885_VMUX_COMPOSITE1,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN6_CH1,
> + .amux = CX25840_AUDIO7,
> + }, {
> + .type = CX23885_VMUX_SVIDEO,
> + .vmux = CX25840_VIN7_CH3 |
> + CX25840_VIN4_CH2 |
> + CX25840_VIN8_CH1 |
> + CX25840_SVIDEO_ON,
> + .amux = CX25840_AUDIO7,
> + } },
> + },
> };
> const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
>
> @@ -897,6 +915,10 @@ struct cx23885_subid cx23885_subids[] = {
> .subvendor = 0x1461,
> .subdevice = 0xd939,
> .card = CX23885_BOARD_AVERMEDIA_HC81R,
> + }, {
> + .subvendor = 0x0070,
> + .subdevice = 0x7133,
> + .card = CX23885_BOARD_HAUPPAUGE_IMPACTVCBE,
> },
> };
> const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
> @@ -977,6 +999,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
> case 71009:
> /* WinTV-HVR1200 (PCIe, Retail, full height)
> * DVB-T and basic analog */
> + case 71100:
> + /* WinTV-ImpactVCB-e (PCIe, Retail, half height)
> + * Basic analog */
> case 71359:
> /* WinTV-HVR1200 (PCIe, OEM, half height)
> * DVB-T and basic analog */
> @@ -1701,6 +1726,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1850:
> case CX23885_BOARD_HAUPPAUGE_HVR1290:
> case CX23885_BOARD_HAUPPAUGE_HVR4400:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> if (dev->i2c_bus[0].i2c_rc == 0)
> hauppauge_eeprom(dev, eeprom+0xc0);
> break;
> @@ -1807,6 +1833,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> case CX23885_BOARD_HAUPPAUGE_HVR1200:
> case CX23885_BOARD_HAUPPAUGE_HVR1700:
> case CX23885_BOARD_HAUPPAUGE_HVR1400:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
> case CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
> @@ -1835,6 +1862,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
> break;
> case CX23885_BOARD_HAUPPAUGE_HVR1250:
> case CX23885_BOARD_HAUPPAUGE_HVR1800:
> + case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
> case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
> case CX23885_BOARD_HAUPPAUGE_HVR1700:
> case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
> diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
> index 7891f34..976fe5d 100644
> --- a/drivers/media/pci/cx23885/cx23885-video.c
> +++ b/drivers/media/pci/cx23885/cx23885-video.c
> @@ -507,6 +507,7 @@ static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
> if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
> (dev->board == CX23885_BOARD_MPX885) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
> + (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
> (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
> diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
> index 0fa4048..6a4b20e 100644
> --- a/drivers/media/pci/cx23885/cx23885.h
> +++ b/drivers/media/pci/cx23885/cx23885.h
> @@ -96,6 +96,7 @@
> #define CX23885_BOARD_TBS_6981 40
> #define CX23885_BOARD_TBS_6980 41
> #define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
> +#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43
>
> #define GPIO_0 0x00000001
> #define GPIO_1 0x00000002
next prev parent reply other threads:[~2014-04-15 10:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-14 13:57 [PATCH] cx23885: add support for Hauppauge ImpactVCB-e Hans Verkuil
2014-04-14 14:22 ` Steven Toth
2014-04-15 10:41 ` it-support [this message]
2014-04-15 10:43 ` Hans Verkuil
2014-04-17 21:07 ` Steve Cookson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=534D0CD5.3090906@sca-uk.com \
--to=it@sca-uk.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=stoth@kernellabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.