From: Sat <sattnag@aim.com>
To: linux-media@vger.kernel.org
Subject: Re: Help with SMS2270 @ linux-sunxi (A20 devices)
Date: Wed, 16 Apr 2014 17:51:21 +0900 [thread overview]
Message-ID: <534E4489.6080909@aim.com> (raw)
In-Reply-To: <DB7459DA-2266-4DF3-BBD6-3CB991F7738A@eletronica.org>
Hi Roberto,
Did you check if the device id of your tuner is included in smsusb.c?
id can be gotten by lsusb command.
Thanks,
Satoshi
(2014/04/16 8:28), Roberto Alcantara wrote:
> Guys,
>
> I’m trying enable Siano SMS2270 ISDB-T tuner in development board with Allwinner A20 SoC.
>
> I recompiled kernel with modules I can load them but something seems wrong. After insert USB Sms2270 dongle I only see:
>
> Jan 1 00:15:20 awsom kernel: [ 922.645502] usb 1-1.4: new high-speed USB device number 6 using sw-ehci
> Jan 1 00:15:20 awsom mtp-probe: checking bus 1, device 6: "/sys/devices/platform/sw-ehci.1/usb1/1-1/1-1.4"
> Jan 1 00:15:20 awsom mtp-probe: bus: 1, device: 6 was not an MTP device
>
> and no more logs.
>
> smsusb was loaded with debug=2.
>
> The usb dongle is plugged on usb powered hub and other devices like keyboard are working fine with this hub port.
>
> What I missing here? Thanks for all tips ! :-)
>
> Best regards,
> - Roberto
>
>
> root@awsom:/home/linaro# lsmod
> Module Size Used by
> sunxi_cedar_mod 10284 0
> smsdvb 13909 0
> smsusb 8936 0
> smsmdtv 28266 2 smsdvb,smsusb
> disp_ump 854 0
> mali_drm 2638 1
> mali 113459 0
> ump 56392 4 disp_ump,mali
> lcd 3646 0
>
> root@awsom:/home/linaro# lsusb
> Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller
> Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon
>
> root@awsom:/home/linaro# uname -a
> Linux awsom 3.4.75.sun7i_CRAFF+ #4 SMP PREEMPT Thu Apr 10 01:17:47 BRT 2014 armv7l armv7l armv7l GNU/Linux
>
>
>
>
> root@awsom:/home/linaro# lsusb -v
>
> Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x058f Alcor Micro Corp.
> idProduct 0x6254 USB Hub
> bcdDevice 1.00
> iManufacturer 0
> iProduct 1 USB2.0Hub
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0001 1x 1 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 4
> wHubCharacteristic 0x0080
> Ganged power switching
> Ganged overcurrent protection
> TT think time 8 FS bits
> Port indicators
> bPwrOn2PwrGood 50 * 2 milli seconds
> bHubContrCurrent 100 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0303 lowspeed power enable connect
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0503 highspeed power enable connect
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd
> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
> iSerial 1 sw-ehci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0503 highspeed power enable connect
> Device Status: 0x0001
> Self Powered
>
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd
> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
> iSerial 1 sw-ohci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x0012
> No power switching (usb 1.0)
> No overcurrent protection
> bPwrOn2PwrGood 2 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ehci_hcd
> iProduct 2 SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
> iSerial 1 sw-ehci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed (or root) hub
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0001 1.1 root hub
> bcdDevice 3.04
> iManufacturer 3 Linux 3.4.75.sun7i_CRAFF+ ohci_hcd
> iProduct 2 SW USB2.0 'Open' Host Controller (OHCI) Driver
> iSerial 1 sw-ohci
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 1
> wHubCharacteristic 0x0012
> No power switching (usb 1.0)
> No overcurrent protection
> bPwrOn2PwrGood 2 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Device Status: 0x0001
> Self Powered
>
> Bus 001 Device 003: ID 0e8f:0021 GreenAsia Inc. Multimedia Keyboard Controller
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x0e8f GreenAsia Inc.
> idProduct 0x0021 Multimedia Keyboard Controller
> bcdDevice 2.07
> iManufacturer 1 CZW
> iProduct 2 USB Keyboard
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 59
> bNumInterfaces 2
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 1 Keyboard
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 62
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 0 No Subclass
> bInterfaceProtocol 0 None
> iInterface 1 CZW
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 50
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0008 1x 8 bytes
> bInterval 10
> Device Status: 0x0000
> (Bus Powered)
>
> Bus 001 Device 004: ID 187f:0600 Siano Mobile Silicon
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x187f Siano Mobile Silicon
> idProduct 0x0600
> bcdDevice 0.08
> iManufacturer 1 MDTV Receiver
> iProduct 2 MDTV Receiver
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 255 Vendor Specific Class
> bDeviceSubClass 255 Vendor Specific Subclass
> bDeviceProtocol 255 Vendor Specific Protocol
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
> root@awsom:/home/linaro#
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2014-04-16 8:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-15 23:28 Help with SMS2270 @ linux-sunxi (A20 devices) Roberto Alcantara
2014-04-16 8:51 ` Sat [this message]
2014-04-16 16:34 ` Mauro Carvalho Chehab
2014-04-17 1:27 ` Roberto Alcantara
2014-04-17 3:06 ` Sat
2014-04-26 22:48 ` Roberto Alcantara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=534E4489.6080909@aim.com \
--to=sattnag@aim.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.