* About Yocto and Imx6 @ 2014-04-16 12:49 jigar chokshi 2014-04-16 13:54 ` John Weber 0 siblings, 1 reply; 5+ messages in thread From: jigar chokshi @ 2014-04-16 12:49 UTC (permalink / raw) To: meta-freescale [-- Attachment #1: Type: text/plain, Size: 1705 bytes --] Hello, Here i attached important parameter of my local.conf file of core-image-minimal. MACHINE ??= 'imx6qsabreauto' DISTRO ?= 'poky' PACKAGE_CLASSES ?= "package_rpm" EXTRA_IMAGE_FEATURES = "debug-tweaks ssh-server-openssh" IMAGE_INSTALL_append = " gcc g++ binutils libgcc libgcc-dev libstdc++ libstdc++-dev glib-2.0 libsigc++-2.0-dev libstdc++-staticdev tslib-conf tslib-tests tslib-calibrate openssh-sftp-server alsa-lib alsa-tools alsa-state alsa-utils-alsaconf tslib evtest dbus nano qtbase qtbase-fonts qtbase-plugins qtbase-examples cinematicexperience gstreamer cairo pango fontconfig freetype pulseaudio " DISTRO_FEATURES_remove = "x11 wayland" I tried to cross compile qt5 using poky tool chain and it was successful. Now when i tried build an application using same tool chain it required an library that is developed by my colleague. so, when i tried to configured that library. echo $PATH /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi ./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ --host=arm-poky-linux-gnueabi --enable-shared --disable-static Now when i am giving make all i am getting following error /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot find -lglib-2.0 I understand this error is because poky cant find glib-2.0 library. but as you can see in local.conf file i installed glib-2.0 lib. I dont know where am i wrong. Thank you, Jigar Chokshi [-- Attachment #2: Type: text/html, Size: 1971 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: About Yocto and Imx6 2014-04-16 12:49 About Yocto and Imx6 jigar chokshi @ 2014-04-16 13:54 ` John Weber [not found] ` <CAAEo+ZoSTQZU34m_gx9JDT39at1M-5eigRUX3Vpj9Urd7wK5JA@mail.gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: John Weber @ 2014-04-16 13:54 UTC (permalink / raw) To: meta-freescale Hi Jigar, On 4/16/14, 7:49 AM, jigar chokshi wrote: > Hello, > > Here i attached important parameter of my local.conf file of core-image-minimal. > > MACHINE ??= 'imx6qsabreauto' > DISTRO ?= 'poky' > PACKAGE_CLASSES ?= "package_rpm" > EXTRA_IMAGE_FEATURES = "debug-tweaks ssh-server-openssh" > IMAGE_INSTALL_append = " gcc g++ binutils libgcc libgcc-dev libstdc++ > libstdc++-dev glib-2.0 libsigc++-2.0-dev libstdc++-staticdev tslib-conf > tslib-tests tslib-calibrate openssh-sftp-server alsa-lib alsa-tools alsa-state > alsa-utils-alsaconf tslib evtest dbus nano qtbase qtbase-fonts qtbase-plugins > qtbase-examples cinematicexperience gstreamer cairo pango fontconfig freetype > pulseaudio " > DISTRO_FEATURES_remove = "x11 wayland" > > > I tried to cross compile qt5 using poky tool chain and it was successful. > Now when i tried build an application using same tool chain it required an > library that is developed by my colleague. > so, when i tried to configured that library. > > echo $PATH > /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi > ./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install > CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ > --host=arm-poky-linux-gnueabi --enable-shared --disable-static > > Now when i am giving make all > > i am getting following error > > /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: > cannot find -lglib-2.0 > > I understand this error is because poky cant find glib-2.0 library. but as you > can see in local.conf file i installed glib-2.0 lib. I think you need other environment variables set in order for your configure script to find the shared libraries (e.g. PKGCONFIG). You might give this a try: bitbake meta-ide-support then source ./tmp/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi I believe that this should take care of most of it. Let us know how it goes. John ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <CAAEo+ZoSTQZU34m_gx9JDT39at1M-5eigRUX3Vpj9Urd7wK5JA@mail.gmail.com>]
* Re: About Yocto and Imx6 [not found] ` <CAAEo+ZoSTQZU34m_gx9JDT39at1M-5eigRUX3Vpj9Urd7wK5JA@mail.gmail.com> @ 2014-04-17 14:18 ` John Weber 2014-04-30 8:23 ` jigar chokshi 0 siblings, 1 reply; 5+ messages in thread From: John Weber @ 2014-04-17 14:18 UTC (permalink / raw) To: meta-freescale@yoctoproject.org [-- Attachment #1: Type: text/html, Size: 7476 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* [meta-freescale] About Yocto and Imx6 2014-04-17 14:18 ` John Weber @ 2014-04-30 8:23 ` jigar chokshi 0 siblings, 0 replies; 5+ messages in thread From: jigar chokshi @ 2014-04-30 8:23 UTC (permalink / raw) To: John Weber, meta-freescale, poky [-- Attachment #1: Type: text/plain, Size: 6765 bytes --] ---------- Forwarded message ---------- From: John Weber <rjohnweber@gmail.com> Date: Thu, Apr 17, 2014 at 4:18 PM Subject: Re: [meta-freescale] About Yocto and Imx6 To: "meta-freescale@yoctoproject.org" <meta-freescale@yoctoproject.org> Hi Jigar, Please do not top post. This means we prefer that you reply with comments/responses inline with the previous message so that others in the list can more easily follow the conversation. On 4/17/14, 4:43 AM, jigar chokshi wrote: Hello John, I have a question regarding your suggestion. Do i have to create another directory for bitbake meta-ide-support or i have to do bitbake in the same directory where i did bitbake core-image -minimal?? No. Bitbake needs to be run in the build directory always. >Hello sorry for late response. i was busy in another work. >First i did bitbake core-image-base in build directory. >after that i created 1 more directory called buildcoreimage in this directory i did >bitbake core-image -minimal. >So now, i did bitbake meta-ide-support in build directory as you told me. I am confused because i think bitbake core-image-minimal will also generate new image then if i want to use core-image-minimal then what i have to do? If you run bitbake core-image-minimal again, and if you changed something in any of the image dependencies, then it will build a new image. Running bitbake meta-ide-support does not require that you rebuild your image - you wanted to be able to build applications using the toolchain and libraries in the sysroot and this step builds an environment file that you can source which does that. Thank you, Jigar Chokshi No problem. I hope it helps. In the future, you might want to email the oe-core mailing list as this question does not specifically pertain to the Freescale BSP but is more of an general OE question. >still in /opt/poky/1.5.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi i cold not find glib library >and gllib library in /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/lib is for X86-64. so it is not useful for me. >In /home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib i can see libglib-2.0.so.0.3600 and that is for >ARM i checked with file command. so, i need this library i am sure. >Now when i tried to cross compile my library using >./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ --host=arm-poky-linux-gnueabi --enable-shared --disable-static LDFLAGS=-L/home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib/ >i got error. >configure: error: in `/home/x-chokshij/Desktop/hmi_rbg/libudcu': >configure: error: C compiler cannot create executables >See `config.log' for more details >i checked config.log file and i found 3 errors as following >configure:3117: arm-poky-linux-gnueabi-gcc -V >&5 >arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-V' >arm-poky-linux-gnueabi-gcc: fatal error: no input files >compilation terminated. >configure:3128: $? = 1 >configure:3117: arm-poky-linux-gnueabi-gcc -qversion >&5 >arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-qversion' >arm-poky-linux-gnueabi-gcc: fatal error: no input files >compilation terminated. >configure:3128: $? = 1 >configure:3148: checking whether the C compiler works >configure:3170: arm-poky-linux-gnueabi-gcc -L/home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib >conftest.c >&5 >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /lib/libc.so.6 >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /usr/lib/libc_nonshared.a >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /lib/ld-linux-armhf.so.3 >collect2: error: ld returned 1 exit status On Wed, Apr 16, 2014 at 3:54 PM, John Weber <rjohnweber@gmail.com> wrote: > Hi Jigar, > > > On 4/16/14, 7:49 AM, jigar chokshi wrote: > >> Hello, >> >> Here i attached important parameter of my local.conf file of >> core-image-minimal. >> >> MACHINE ??= 'imx6qsabreauto' >> DISTRO ?= 'poky' >> PACKAGE_CLASSES ?= "package_rpm" >> EXTRA_IMAGE_FEATURES = "debug-tweaks ssh-server-openssh" >> IMAGE_INSTALL_append = " gcc g++ binutils libgcc libgcc-dev libstdc++ >> libstdc++-dev glib-2.0 libsigc++-2.0-dev libstdc++-staticdev tslib-conf >> tslib-tests tslib-calibrate openssh-sftp-server alsa-lib alsa-tools >> alsa-state alsa-utils-alsaconf tslib evtest dbus nano qtbase qtbase-fonts >> qtbase-plugins qtbase-examples cinematicexperience gstreamer cairo pango >> fontconfig freetype pulseaudio " >> DISTRO_FEATURES_remove = "x11 wayland" >> >> >> I tried to cross compile qt5 using poky tool chain and it was successful. >> Now when i tried build an application using same tool chain it required >> an library that is developed by my colleague. >> so, when i tried to configured that library. >> >> echo $PATH >> >> /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi >> ./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install >> CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ >> --host=arm-poky-linux-gnueabi --enable-shared --disable-static >> >> Now when i am giving make all >> >> i am getting following error >> >> /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: >> cannot find -lglib-2.0 >> >> I understand this error is because poky cant find glib-2.0 library. but >> as you can see in local.conf file i installed glib-2.0 lib. >> > I think you need other environment variables set in order for your > configure script to find the shared libraries (e.g. PKGCONFIG). You might > give this a try: > > bitbake meta-ide-support > > then > > source ./tmp/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi > > I believe that this should take care of most of it. Let us know how it > goes. > > John > -- > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale [-- Attachment #2: Type: text/html, Size: 11088 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* About Yocto and Imx6 @ 2014-04-30 8:23 ` jigar chokshi 0 siblings, 0 replies; 5+ messages in thread From: jigar chokshi @ 2014-04-30 8:23 UTC (permalink / raw) To: John Weber, meta-freescale, poky [-- Attachment #1: Type: text/plain, Size: 6765 bytes --] ---------- Forwarded message ---------- From: John Weber <rjohnweber@gmail.com> Date: Thu, Apr 17, 2014 at 4:18 PM Subject: Re: [meta-freescale] About Yocto and Imx6 To: "meta-freescale@yoctoproject.org" <meta-freescale@yoctoproject.org> Hi Jigar, Please do not top post. This means we prefer that you reply with comments/responses inline with the previous message so that others in the list can more easily follow the conversation. On 4/17/14, 4:43 AM, jigar chokshi wrote: Hello John, I have a question regarding your suggestion. Do i have to create another directory for bitbake meta-ide-support or i have to do bitbake in the same directory where i did bitbake core-image -minimal?? No. Bitbake needs to be run in the build directory always. >Hello sorry for late response. i was busy in another work. >First i did bitbake core-image-base in build directory. >after that i created 1 more directory called buildcoreimage in this directory i did >bitbake core-image -minimal. >So now, i did bitbake meta-ide-support in build directory as you told me. I am confused because i think bitbake core-image-minimal will also generate new image then if i want to use core-image-minimal then what i have to do? If you run bitbake core-image-minimal again, and if you changed something in any of the image dependencies, then it will build a new image. Running bitbake meta-ide-support does not require that you rebuild your image - you wanted to be able to build applications using the toolchain and libraries in the sysroot and this step builds an environment file that you can source which does that. Thank you, Jigar Chokshi No problem. I hope it helps. In the future, you might want to email the oe-core mailing list as this question does not specifically pertain to the Freescale BSP but is more of an general OE question. >still in /opt/poky/1.5.1/sysroots/cortexa9hf-vfp-neon-poky-linux-gnueabi i cold not find glib library >and gllib library in /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/lib is for X86-64. so it is not useful for me. >In /home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib i can see libglib-2.0.so.0.3600 and that is for >ARM i checked with file command. so, i need this library i am sure. >Now when i tried to cross compile my library using >./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ --host=arm-poky-linux-gnueabi --enable-shared --disable-static LDFLAGS=-L/home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib/ >i got error. >configure: error: in `/home/x-chokshij/Desktop/hmi_rbg/libudcu': >configure: error: C compiler cannot create executables >See `config.log' for more details >i checked config.log file and i found 3 errors as following >configure:3117: arm-poky-linux-gnueabi-gcc -V >&5 >arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-V' >arm-poky-linux-gnueabi-gcc: fatal error: no input files >compilation terminated. >configure:3128: $? = 1 >configure:3117: arm-poky-linux-gnueabi-gcc -qversion >&5 >arm-poky-linux-gnueabi-gcc: error: unrecognized command line option '-qversion' >arm-poky-linux-gnueabi-gcc: fatal error: no input files >compilation terminated. >configure:3128: $? = 1 >configure:3148: checking whether the C compiler works >configure:3170: arm-poky-linux-gnueabi-gcc -L/home/x-chokshij/fsl-community-bsp/build/tmp/sysroots/imx6qsabreauto/usr/lib >conftest.c >&5 >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /lib/libc.so.6 >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /usr/lib/libc_nonshared.a >/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: cannot >find /lib/ld-linux-armhf.so.3 >collect2: error: ld returned 1 exit status On Wed, Apr 16, 2014 at 3:54 PM, John Weber <rjohnweber@gmail.com> wrote: > Hi Jigar, > > > On 4/16/14, 7:49 AM, jigar chokshi wrote: > >> Hello, >> >> Here i attached important parameter of my local.conf file of >> core-image-minimal. >> >> MACHINE ??= 'imx6qsabreauto' >> DISTRO ?= 'poky' >> PACKAGE_CLASSES ?= "package_rpm" >> EXTRA_IMAGE_FEATURES = "debug-tweaks ssh-server-openssh" >> IMAGE_INSTALL_append = " gcc g++ binutils libgcc libgcc-dev libstdc++ >> libstdc++-dev glib-2.0 libsigc++-2.0-dev libstdc++-staticdev tslib-conf >> tslib-tests tslib-calibrate openssh-sftp-server alsa-lib alsa-tools >> alsa-state alsa-utils-alsaconf tslib evtest dbus nano qtbase qtbase-fonts >> qtbase-plugins qtbase-examples cinematicexperience gstreamer cairo pango >> fontconfig freetype pulseaudio " >> DISTRO_FEATURES_remove = "x11 wayland" >> >> >> I tried to cross compile qt5 using poky tool chain and it was successful. >> Now when i tried build an application using same tool chain it required >> an library that is developed by my colleague. >> so, when i tried to configured that library. >> >> echo $PATH >> >> /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi >> ./configure --prefix=/home/x-chokshij/hmi_rbg/libudcu-arm/_Install >> CC=arm-poky-linux-gnueabi-gcc CXX=arm-poky-linux-gnueabi-g++ >> --host=arm-poky-linux-gnueabi --enable-shared --disable-static >> >> Now when i am giving make all >> >> i am getting following error >> >> /opt/poky/1.5.1/sysroots/x86_64-pokysdk-linux/usr/libexec/arm-poky-linux-gnueabi/gcc/arm-poky-linux-gnueabi/4.8.1/ld: >> cannot find -lglib-2.0 >> >> I understand this error is because poky cant find glib-2.0 library. but >> as you can see in local.conf file i installed glib-2.0 lib. >> > I think you need other environment variables set in order for your > configure script to find the shared libraries (e.g. PKGCONFIG). You might > give this a try: > > bitbake meta-ide-support > > then > > source ./tmp/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi > > I believe that this should take care of most of it. Let us know how it > goes. > > John > -- > _______________________________________________ > meta-freescale mailing list > meta-freescale@yoctoproject.org > https://lists.yoctoproject.org/listinfo/meta-freescale > -- _______________________________________________ meta-freescale mailing list meta-freescale@yoctoproject.org https://lists.yoctoproject.org/listinfo/meta-freescale [-- Attachment #2: Type: text/html, Size: 11088 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-30 8:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-16 12:49 About Yocto and Imx6 jigar chokshi
2014-04-16 13:54 ` John Weber
[not found] ` <CAAEo+ZoSTQZU34m_gx9JDT39at1M-5eigRUX3Vpj9Urd7wK5JA@mail.gmail.com>
2014-04-17 14:18 ` John Weber
2014-04-30 8:23 ` [meta-freescale] " jigar chokshi
2014-04-30 8:23 ` jigar chokshi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.