Re: [Xenomai] Pre/Post patches

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

On 04/21/2014 02:38 PM, Huub Van Niekerk wrote:
> On Monday, April 21, 2014 10:15 AM, Gilles Chanteperdrix
> <gilles.chanteperdrix@xenomai.org> wrote:
> 
> Le 21/04/2014 08:28, Huub Van Niekerk a écrit :
>>> On Saturday, April 19, 2014 8:07 PM, Gilles Chanteperdrix
>> <gilles.chanteperdrix@xenomai.org> wrote:
>> 
>>> Hi all,
>> 
>>> I am currently validating the I-pipe patch for Linux 3.14 on
>>> armv4 and armv5, but it should already work for armv6 and armv7
>>> processors, it is available as a branch for-ipipe-3.14.0 in
>>> ipipe-gch git. Could you have a look at it on BeagleBone,
>>> Raspberry and Zynq? For the SOCs supported by mainline, please
>>> simply send patches to the for-ipipe-3.14.0 branch.
>> 
>> Hi,
>> 
>> When looking at
>> http://git.xenomai.org/ipipe-gch.git/?h=for-ipipe-3.14.0 , I think
>> I see several patches but I'm not sure how to act to get a patch
>> for the armv7 (armhf / beagle-xm).
> 
>> Note that the mail was intended for BeagleBone, Raspberry and Zynq.
>> For beagleboard, the kernel should already work, and you can wait
>> for the final I-pipe patch to be released. But if you want to
>> validate the kernel early, please go ahead, it will not hurt.
> 
>> Simply checkout this tree, and use it with the "prepare-kernel.sh" 
>> script, it will detect that the tree already contains the I-pipe 
>> changes, and will not try and apply an I-pipe patch.
> 
> Ok, I think I will wait for the final I-pipe patch then (assuming it
> won't be a long wait). BTW, with this be for version 2.6.3 or a new
> version ?

We will have to release 2.6.4.

-- 
                                                                Gilles.