All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oliver Hartkopp <socketcan@hartkopp.net>
To: "Smith, Christopher - 0999 - MITLL" <chris.smith@ll.mit.edu>
Cc: "Kvaser Support (support@kvaser.com)" <support@kvaser.com>,
	"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
	Olivier Sobrie <olivier@sobrie.be>
Subject: Re: Kvaser socketCAN support
Date: Mon, 21 Apr 2014 19:48:44 +0200	[thread overview]
Message-ID: <535559FC.70506@hartkopp.net> (raw)
In-Reply-To: <f0331cq3H1VPknv.RZmta@smtp.rzone.de>

Hello Christopher,

the Kvaser Leaf USB driver has been contributed by Olivier Sobrie (see CC).

See log messages of the driver in the Linux Mainline repository:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/net/can/usb/kvaser_usb.c

The initial support was added at 2012-11-27 and emerged in Linux 3.8.

Regards,
Oliver

ps. feel free to ask this kind of questions on the linux-can mailing list
which I added in CC. Tnx


On 17.04.2014 03:31, Smith, Christopher - 0999 - MITLL wrote:
> Hi, I was just looking to get confirmation and a few points for getting the
> initial install figured out. 
> 
>  
> 
> I have a kvaser leaf device that I'd like to use with socketCAN.  Is this in
> fact supported?
> 
>  
> 
> I noticed the general process for setting up socketCAN documented on wikipedia
> <http://en.wikipedia.org/wiki/SocketCAN>.  When I issue the following command:
> 
>  
> 
> ip link add dev vcan0 type vcan
> 
>  
> 
> What do I replace vcan0 with?  I’ve tried can0 with no luck.  Is there a way
> to check which devices are registered?  I’m not entirely sure that when I
> plugged in the USB device the proper drivers were recognized.  I may need some
> of the lower level drivers distributed by Kvaser.
> 
>  
> 
> Thank you,
> 
>  
> 
> Chris
> 
>  
> 
> -----Original Message-----
> From: Kvaser Support [mailto:support@kvaser.com]
> Sent: Monday, April 14, 2014 3:24 PM
> To: Smith, Christopher - 0999 - MITLL
> Subject: Re: (Case 14217) Linux driver support
> 
>  
> 
> Did the response below answer your questions?
> 
>  
> 
> Or do you need more information?
> 
>  
> 
> Best regards,
> 
>  
> 
> Troy
> 
> -- 
> 
> Kvaser Support
> 
> support@kvaser.com <mailto:support@kvaser.com>
> 
> ---------------------------------------------------------------------------
> 
>  
> 
>  
> 
>  
> 
> -----Original Message-----
> 
> From: "Kvaser Support" <support@kvaser.com <mailto:support@kvaser.com>>
> 
> Reply-To: "Kvaser Support" <support@kvaser.com <mailto:support@kvaser.com>>
> 
> Date: Mon, 31 Mar 2014 22:29:00 +02:00
> 
> To: "Smith, Christopher - 0999 - MITLL" <chris.smith@ll.mit.edu
> <mailto:chris.smith@ll.mit.edu>>
> 
> Subject: Re: (Case 14217) Linux driver support
> 
>  
> 
>>To our knowledge, support for the Leaf family was added to socketcan by
> Oliver Harkopp in 2012.
> 
>> 
> 
>>I tried to perform a google search to determine which version of Linux this
> has been included in without good results.
> 
>> 
> 
>>I hope the socketcan community can point you to the version that includes
> this patch.
> 
>> 
> 
>>Best regards,
> 
>> 
> 
>>Troy
> 
>>--
> 
>>Kvaser Support
> 
>>support@kvaser.com <mailto:support@kvaser.com>
> 
>>---------------------------------------------------------------------------
> 

       reply	other threads:[~2014-04-21 17:48 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <f0331cq3H1VPknv.RZmta@smtp.rzone.de>
2014-04-21 17:48 ` Oliver Hartkopp [this message]
2014-04-22  0:40   ` (Case 14359) Kvaser socketCAN support Kvaser Support
2014-04-22  5:54     ` Yegor Yefremov
2014-04-23  7:38       ` Kvaser Support
2014-04-23  7:48         ` Yegor Yefremov
2014-04-23 16:19           ` Kvaser Support
2014-04-24  7:46             ` Yegor Yefremov
2014-04-24  9:19               ` Marc Kleine-Budde
2014-04-24 12:01                 ` Oliver Hartkopp
2014-04-24 12:06                   ` Marc Kleine-Budde
2014-04-24 12:34                     ` Yegor Yefremov
2014-04-24 18:56                       ` Oliver Hartkopp
2014-04-24 19:29                         ` Yegor Yefremov
2014-04-24 22:12                           ` Kvaser Support
2014-04-25 20:38                             ` SocketCAN Supported Controllers information updates Oliver Hartkopp
2014-04-28  0:25                               ` (Case 14383) " Kvaser Support
2014-04-27 17:41                         ` elinux wiki Kurt Van Dijck
     [not found]   ` <r049e3q3UHfiSQJ.RZmta@smtp.rzone.de>
2014-05-01  8:56     ` Kvaser socketCAN support Oliver Hartkopp
     [not found]       ` <R0595dq41EVg2BS.RZmta@smtp.rzone.de>
2014-05-01 16:24         ` Oliver Hartkopp
     [not found]           ` <6073ccq41HkW3ar.RZmta@smtp.rzone.de>
2014-05-01 18:46             ` Oliver Hartkopp
     [not found]           ` <53628879.751e8c0a.6be4.ffffc061SMTPIN_ADDED_MISSING@mx.google.com>
2014-05-01 20:46             ` Olivier Sobrie
     [not found]               ` <5363a95a.e3208c0a.bc54.574dSMTPIN_ADDED_MISSING@mx.google.com>
2014-05-03 13:18                 ` Olivier Sobrie
2014-05-04  6:00                   ` (Case 14420) " Kvaser Support
2014-05-04 20:14                     ` Olivier Sobrie
2014-05-04 21:23                       ` Kvaser Support
2014-05-11 20:34                 ` Olivier Sobrie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=535559FC.70506@hartkopp.net \
    --to=socketcan@hartkopp.net \
    --cc=chris.smith@ll.mit.edu \
    --cc=linux-can@vger.kernel.org \
    --cc=olivier@sobrie.be \
    --cc=support@kvaser.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.