[PATCH v2 00/38] ARM: orion5x: big step towards DT conversion

[sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)]

On 04/22/2014 11:26 PM, Thomas Petazzoni wrote:
> Jason, Andrew, Sebastian, Gregory,
>
> Here is the second version of the Orion5x big DT migration: it moves
> over to the Device Tree the probing of a large number of devices, up
> to a point where on platform (edmini_v2) can be fully converted, and
> three other platforms can be almost completely converted.
>
> Summary of the patches:
>
>   * Patches 1 and 2 are fixes that have already been taken by Jason
>     Cooper in mvebu/fixes.
>
>   * Patches 3 and 4 add the Orion pinctrl and Orion clock drivers
>     respectively.
>
>   * Patches 5 to 9 extend the existing mvebu-devbus driver to also
>     cover the Orion platform.
>
>   * Patches 10 to 33 progressively migrate the edmini_v2 platform more
>     and more to the Device Tree, which mainly consists of SoC-level
>     changes (using DT probed timer, clocks, etc.)
>
>   * Patches 34, 35 and 36 convert three other Orion5x platforms to the
>     Device Tree.
>
>   * Patches 37 and 38 make some follow-up clean up in
>     arch/arm/plat-orion/ of code that is no longer used after this DT
>     migration.
>
> Changes since v1:
>
> The vast majority of the changes were made according to the
> suggestions and review of Sebastian Hesselbarth. Thanks to him for the
> very detailed review.
>
>   * In the pinctrl driver:
>     - change pci(rstout) to pcie(rstout)
>     - rename double pci functions pci-1
>
>   * In the clock driver:
>     - use decimal values for shift values
>     - join two similar cases
>
>   * In the mvebu-devbus driver:
>     - minor fixes in DT binding documentation
>     - use _SHIFT instead of _BIT for Armada definitions
>     - use _SHIFT where needed for Orion definitions, use BIT() directly
>       in the macro definition for single bit fields, and define _MASK
>       values.
>     - introduce a devbus,keep-config DT property to make timing
>       parameters optional, which is useful when migrating platforms to
>       the Device Tree since we may not have their Device Bus timing
>       details readily available.
>
>   * Added Acked-by from Sebastian on the following patches:

I guess you now have an Acked-by for each of the individual patches.

Great work, thanks Thomas!

Sebastian

>     - ARM: orion5x: move interrupt controller node into ocp
>     - ARM: orion5x: switch to preprocessor includes in DT
>     - ARM: orion5x: use existing dt-bindings include for Device Tree files
>     - ARM: orion5x: add interrupt for Ethernet in Device Tree
>     - ARM: orion5x: switch to use the clock driver for DT platforms
>     - ARM: orion5x: enable pinctrl driver at SoC level
>     - ARM: orion5x: add Device Bus description at SoC level
>     - ARM: orion5x: update I2C description at SoC level
>     - ARM: orion5x: update I2C description at SoC level
>     - ARM: orion5x: remove unneeded code for edmini_v2
>
>   * Numerous Device Tree improvements:
>     - add node labels for all devices, and used them in the .dts
>       files.
>     - add linux,stdout-path chosen property.
>     - add missing chosen and memory nodes for d2net
>     - use the clocks property instead of the clock-frequency property
>       for UART controllers, and fixed board DTs accordingly.
>     - rename the xor node to dma-controller, to match ePAPR.
>     - rename gpio_leds to gpio-leds and gpio_keys to gpio-keys.
>     - use GPIO dt-bindings header file where possible.
>     - use vendor prefixes for I2C devices
>
>   * Changed board-dt.c to call mvebu_mbus_dt_init() in
>     ->init_machine(), which allows to remove ->init_time() entirely.
>
>   * One more board converted to the Device Tree: the Maxtor Shared
>     Storage II.
>
> Thomas
>
> Thomas Petazzoni (38):
>    ARM: orion5x: fix target ID for crypto SRAM window
>    memory: mvebu-devbus: fix the conversion of the bus width
>    pinctrl: mvebu: new driver for Orion platforms
>    clk: mvebu: add Orion5x clock driver
>    memory: mvebu-devbus: use ARMADA_ prefix in defines
>    memory: mvebu-devbus: use _SHIFT suffixes instead of _BIT
>    memory: mvebu-devbus: split functions
>    memory: mvebu-devbus: add Orion5x support
>    memory: mvebu-devbus: add a devbus,keep-config property
>    ARM: orion5x: move interrupt controller node into ocp
>    ARM: orion5x: switch to preprocessor includes in DT
>    ARM: orion5x: use existing dt-bindings include for Device Tree files
>    ARM: orion5x: convert DT to use the mvebu-mbus driver
>    ARM: orion5x: add node labels in Orion5x SoC Device Tree file
>    ARM: orion5x: use gpio-keys and gpio-leds instead of
>      gpio_keys/gpio_leds in edmini_v2
>    ARM: orion5x: add linux,stdout-path to edmini_v2
>    ARM: orion5x: use node labels for UART and SATA on edmini_v2
>    ARM: orion5x: rename XOR node to dma-controller@<address>
>    ARM: orion5x: add interrupt for Ethernet in Device Tree
>    ARM: orion5x: switch to use the clock driver for DT platforms
>    ARM: orion5x: convert to use 'clocks' property for UART controllers
>    ARM: orion: switch to a per-platform handle_irq() function
>    ARM: orion5x: switch to DT interrupts and timer
>    ARM: orion5x: enable pinctrl driver at SoC level
>    ARM: orion5x: update I2C description at SoC level
>    ARM: orion5x: add Device Bus description at SoC level
>    ARM: orion5x: add standard pinctrl configs for sata0 and sata1
>    ARM: orion5x: convert edmini_v2 to DT pinctrl
>    ARM: orion5x: use DT to describe I2C devices on edmini_v2
>    ARM: orion5x: use DT to describe EHCI on edmini_v2
>    ARM: orion5x: use DT to describe NOR on edmini_v2
>    ARM: orion5x: keep TODO list in edmini_v2 DT
>    ARM: orion5x: remove unneeded code for edmini_v2
>    ARM: orion5x: convert RD-88F5182 to Device Tree
>    ARM: orion5x: convert d2net to Device Tree
>    ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
>    ARM: orion: remove no longer needed DT IRQ code
>    ARM: orion: remove no longer needed gpio DT code
>
>   .../devicetree/bindings/clock/mvebu-core-clock.txt |   8 +
>   .../bindings/memory-controllers/mvebu-devbus.txt   |  32 +-
>   .../bindings/pinctrl/marvell,orion-pinctrl.txt     |  91 +++++
>   arch/arm/boot/dts/Makefile                         |   5 +-
>   arch/arm/boot/dts/orion5x-lacie-d2-network.dts     | 236 +++++++++++++
>   .../dts/orion5x-lacie-ethernet-disk-mini-v2.dts    | 141 ++++++--
>   .../boot/dts/orion5x-maxtor-shared-storage-2.dts   | 178 ++++++++++
>   arch/arm/boot/dts/orion5x-mv88f5182.dtsi           |  45 +++
>   arch/arm/boot/dts/orion5x-rd88f5182-nas.dts        | 177 ++++++++++
>   arch/arm/boot/dts/orion5x.dtsi                     | 289 +++++++++-------
>   arch/arm/mach-dove/irq.c                           |  36 ++
>   arch/arm/mach-kirkwood/irq.c                       |  36 ++
>   arch/arm/mach-orion5x/Kconfig                      |  37 +--
>   arch/arm/mach-orion5x/Makefile                     |   7 +-
>   arch/arm/mach-orion5x/board-d2net.c                | 109 ++++++
>   arch/arm/mach-orion5x/board-dt.c                   |  18 +-
>   arch/arm/mach-orion5x/board-mss2.c                 |  90 +++++
>   arch/arm/mach-orion5x/board-rd88f5182.c            | 116 +++++++
>   arch/arm/mach-orion5x/common.h                     |  15 +-
>   arch/arm/mach-orion5x/d2net-setup.c                | 365 ---------------------
>   arch/arm/mach-orion5x/edmini_v2-setup.c            | 169 ----------
>   arch/arm/mach-orion5x/irq.c                        |  28 ++
>   arch/arm/mach-orion5x/mss2-setup.c                 | 274 ----------------
>   arch/arm/plat-orion/gpio.c                         |  48 ---
>   arch/arm/plat-orion/include/plat/irq.h             |   1 -
>   arch/arm/plat-orion/include/plat/orion-gpio.h      |   1 -
>   arch/arm/plat-orion/irq.c                          |  77 -----
>   drivers/clk/mvebu/Kconfig                          |   4 +
>   drivers/clk/mvebu/Makefile                         |   1 +
>   drivers/clk/mvebu/orion.c                          | 210 ++++++++++++
>   drivers/memory/mvebu-devbus.c                      | 234 +++++++++----
>   drivers/pinctrl/mvebu/Kconfig                      |   4 +
>   drivers/pinctrl/mvebu/Makefile                     |   1 +
>   drivers/pinctrl/mvebu/pinctrl-orion.c              | 261 +++++++++++++++
>   34 files changed, 2162 insertions(+), 1182 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
>   create mode 100644 arch/arm/boot/dts/orion5x-lacie-d2-network.dts
>   create mode 100644 arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
>   create mode 100644 arch/arm/boot/dts/orion5x-mv88f5182.dtsi
>   create mode 100644 arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
>   create mode 100644 arch/arm/mach-orion5x/board-d2net.c
>   create mode 100644 arch/arm/mach-orion5x/board-mss2.c
>   create mode 100644 arch/arm/mach-orion5x/board-rd88f5182.c
>   delete mode 100644 arch/arm/mach-orion5x/d2net-setup.c
>   delete mode 100644 arch/arm/mach-orion5x/edmini_v2-setup.c
>   delete mode 100644 arch/arm/mach-orion5x/mss2-setup.c
>   create mode 100644 drivers/clk/mvebu/orion.c
>   create mode 100644 drivers/pinctrl/mvebu/pinctrl-orion.c
>