Re: Microblaze image hanging in qemu with 3.15-rc

[Michal Simek <monstr@monstr.eu>]

[-- Attachment #1: Type: text/plain, Size: 3646 bytes --]

On 04/23/2014 05:45 PM, Guenter Roeck wrote:
> On Wed, Apr 23, 2014 at 04:12:59PM +0200, Michal Simek wrote:
>> On 04/23/2014 03:38 PM, Guenter Roeck wrote:
>>> On 04/22/2014 10:32 PM, Michal Simek wrote:
>>>> Hi Guenter,
>>>>
>>>>
>>>> On 04/22/2014 07:23 PM, Guenter Roeck wrote:
>>>>> Hi all,
>>>>>
>>>>> when trying to run a microblaze image with 3.15-rc1 or 3.15-rc2 in qemu,
>>>>> I get the following hangup. This used to work with earlier kernels
>>>>> with the same configuration.
>>>>>
>>>>> Is this a known problem, or is something wrong with my configuration
>>>>> or with my qemu command line ?
>>>>
>>>> Is this BE/LE version? Which qemu do you use?
>>>
>>> BE.
>>>
>>> file vmlinux:
>>>
>>> vmlinux: ELF 32-bit MSB  executable, version 1 (SYSV), statically linked, BuildID[sha1]=5e1872c08df2956eddaed6fc1f6528a8540375b7, not stripped
>>>
>>> qemu-system-microblaze --version:
>>>
>>> QEMU emulator version 1.7.0, Copyright (c) 2003-2008 Fabrice Bellard
>>>
>>> gcc --version:
>>>
>>> microblaze-linux-gcc (GCC) 4.8.0
>>> Copyright (C) 2013 Free Software Foundation, Inc.
>>> This is free software; see the source for copying conditions.  There is NO
>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>>> There is endian autodetection in timer and intc driver
>>>> which can caused this problem.
>>>>
>>> Is this new code ? I didn't see the problem in 3.13 (same compile options,
>>> same configuration, same compiler, same qemu version).
>>
>> yes it was added to 3.15-rc1.
>>
>> Try to rever this one
>> a66a626 microblaze: Use asm-generic/io.h
>>
>> but the problem is probably here because you are not getting proper
>> reaction from qemu model.
>> a1715bb microblaze: Make timer driver endian aware
>> 1aa1243 microblaze: Make intc driver endian aware
>>
>> I have tested it on the latest petalinux qemu and there shouldn't be
>> any problem.
>>
> Hi Michal,
> 
> qemu 2.0.0 still has the problem. Bisect points to
> 
> commit a66a626538af65cbfc611e2b2fce500ed3f24518
> Author: Michal Simek <michal.simek@xilinx.com>
> Date:   Thu Feb 7 15:12:24 2013 +0100
> 
>     microblaze: Use asm-generic/io.h
> 
> as the culprit, so you were right on the money. Reverting this commit
> fixes the problem.

yep. But it is just side effect of previous two commits I have mentioned.
Can you just please check if you are setting up correct IO functions?

	write_fn = timer_write32;
	read_fn = timer_read32;

	write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
	if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
		write_fn = timer_write32_be;
		read_fn = timer_read32_be;
	}
git

> Assuming this is in fact a problem with qemu, can you point me to a set
> of qemu patches necessary to fix it ? Also, do you know if there are plans
> to send the patches upstream ? I don't find anything related in the qemu
> repository (though of course I may have missed it).

Yes, it should be qemu issue. I am not aware about particular qemu patches
but you can try to use https://github.com/Xilinx/qemu
but now sure if Peter updating this repository.

Anyway if you look at code above and I expect that the problem is just
that autodetection is broken in your qemu it should be pretty simple
to fix it.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 263 bytes --]