From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <5358B713.9040300@easyarm.com> Date: Thu, 24 Apr 2014 12:32:43 +0530 From: vattipalli MIME-Version: 1.0 References: <5355F933.20200@easyarm.com> <535640F8.1040805@xenomai.org> In-Reply-To: <535640F8.1040805@xenomai.org> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] porting xenomai to 3.2 kernel using SOC Ti Am3359 List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org Hi Gilles, Thanks for your help. As per your suggestion, instead of working on linux-3.2 kernel for Am3359, I want to configure Xenomai for 3.13 kernel. Can i get any patches for kernel 3.13 kernel. Because I have gone through ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources, I found patches for 3.8 kernel for Beaglebone. Thanks & Regards Praveen On Tuesday 22 April 2014 03:44 PM, Gilles Chanteperdrix wrote: > On 04/22/2014 07:08 AM, vattipalli wrote: >> hi, I am working on Ti Am3359 processor with linux-3.2 kernel. I am >> trying to port Xenomai. I have applied ipipe-core-3.2.21-arm-4.patch >> patch, and compiled the kernel. But when booting uImage it hanged at >> >> Uncompressing Linux... done, booting the kernel. I could not see any >> console after this. > The I-pipe patch for Linux 3.2 does not support Am33xx processors. And > in fact has known bugs, so is not recommended at all. We have more > recent patches for Linux 3.8 and Linux 3.10. See the help for beaglebone > in ksrc/arch/arm/patches/README in Xenomai 2.6.3 sources. > > >> But the above patch Support for CSR SiRFSoC ARM >> Cortex A9 Platform. > I do not understand this sentence. > >> Could i get any patch for ARM Cortex A8 >> Platform(Ti AM3359) for linux-3.2 kernel. > No. >