From: Suman Anna <s-anna@ti.com>
To: "Nayak, Rajendra" <rnayak@ti.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: "tony@atomide.com" <tony@atomide.com>,
"Menon, Nishanth" <nm@ti.com>, "arnd@arndb.de" <arnd@arndb.de>,
"bcousson@baylibre.com" <bcousson@baylibre.com>
Subject: Re: [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices
Date: Thu, 24 Apr 2014 12:09:08 -0500 [thread overview]
Message-ID: <53594534.8010100@ti.com> (raw)
In-Reply-To: <1398333987-19454-4-git-send-email-rnayak@ti.com>
Hi Rajendra,
On 04/24/2014 05:06 AM, Nayak, Rajendra wrote:
> The only difference from the dra74x devices is the missing .smp entry.
>
> While at it, also fix the use of __initdata (across the file) and replace them
> with __initconst as reported by checkpatch
>
> ERROR: Use of const init definition must use __initconst
> +static const char *dra72x_boards_compat[] __initdata = {
Since it looks like you are gonna do another respin, care to separate
out the __initdata to __initconst change for existing ones into a
different patch, and limit this patch to just what the patch subject says.
regards
Suman
>
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> ---
> arch/arm/mach-omap2/board-generic.c | 45 ++++++++++++++++++++++++-----------
> 1 file changed, 31 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index b8920b6..dabb9f6 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -43,7 +43,7 @@ static void __init omap_generic_init(void)
> }
>
> #ifdef CONFIG_SOC_OMAP2420
> -static const char *omap242x_boards_compat[] __initdata = {
> +static const char *omap242x_boards_compat[] __initconst = {
> "ti,omap2420",
> NULL,
> };
> @@ -62,7 +62,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_OMAP2430
> -static const char *omap243x_boards_compat[] __initdata = {
> +static const char *omap243x_boards_compat[] __initconst = {
> "ti,omap2430",
> NULL,
> };
> @@ -81,7 +81,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_ARCH_OMAP3
> -static const char *omap3_boards_compat[] __initdata = {
> +static const char *omap3_boards_compat[] __initconst = {
> "ti,omap3430",
> "ti,omap3",
> NULL,
> @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *omap36xx_boards_compat[] __initdata = {
> +static const char *omap36xx_boards_compat[] __initconst = {
> "ti,omap36xx",
> NULL,
> };
> @@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *omap3_gp_boards_compat[] __initdata = {
> +static const char *omap3_gp_boards_compat[] __initconst = {
> "ti,omap3-beagle",
> "timll,omap3-devkit8000",
> NULL,
> @@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *am3517_boards_compat[] __initdata = {
> +static const char *am3517_boards_compat[] __initconst = {
> "ti,am3517",
> NULL,
> };
> @@ -157,7 +157,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_AM33XX
> -static const char *am33xx_boards_compat[] __initdata = {
> +static const char *am33xx_boards_compat[] __initconst = {
> "ti,am33xx",
> NULL,
> };
> @@ -177,7 +177,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_ARCH_OMAP4
> -static const char *omap4_boards_compat[] __initdata = {
> +static const char *omap4_boards_compat[] __initconst = {
> "ti,omap4460",
> "ti,omap4430",
> "ti,omap4",
> @@ -199,7 +199,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_OMAP5
> -static const char *omap5_boards_compat[] __initdata = {
> +static const char *omap5_boards_compat[] __initconst = {
> "ti,omap5432",
> "ti,omap5430",
> "ti,omap5",
> @@ -221,7 +221,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_AM43XX
> -static const char *am43_boards_compat[] __initdata = {
> +static const char *am43_boards_compat[] __initconst = {
> "ti,am4372",
> "ti,am43",
> NULL,
> @@ -240,13 +240,13 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_DRA7XX
> -static const char *dra7xx_boards_compat[] __initdata = {
> - "ti,dra7xx",
> +static const char *dra74x_boards_compat[] __initconst = {
> + "ti,dra74",
> "ti,dra7",
> NULL,
> };
>
> -DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
> +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
> .reserve = omap_reserve,
> .smp = smp_ops(omap4_smp_ops),
> .map_io = omap5_map_io,
> @@ -255,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
> .init_irq = omap_gic_of_init,
> .init_machine = omap_generic_init,
> .init_time = omap5_realtime_timer_init,
> - .dt_compat = dra7xx_boards_compat,
> + .dt_compat = dra74x_boards_compat,
> + .restart = omap44xx_restart,
> +MACHINE_END
> +
> +static const char *dra72x_boards_compat[] __initconst = {
> + "ti,dra72",
> + NULL,
> +};
> +
> +DT_MACHINE_START(DRA72_DT, "Generic DRA72X (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap5_map_io,
> + .init_early = dra7xx_init_early,
> + .init_late = dra7xx_init_late,
> + .init_irq = omap_gic_of_init,
> + .init_machine = omap_generic_init,
> + .init_time = omap5_realtime_timer_init,
> + .dt_compat = dra72x_boards_compat,
> .restart = omap44xx_restart,
> MACHINE_END
> #endif
>
WARNING: multiple messages have this Message-ID (diff)
From: s-anna@ti.com (Suman Anna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices
Date: Thu, 24 Apr 2014 12:09:08 -0500 [thread overview]
Message-ID: <53594534.8010100@ti.com> (raw)
In-Reply-To: <1398333987-19454-4-git-send-email-rnayak@ti.com>
Hi Rajendra,
On 04/24/2014 05:06 AM, Nayak, Rajendra wrote:
> The only difference from the dra74x devices is the missing .smp entry.
>
> While at it, also fix the use of __initdata (across the file) and replace them
> with __initconst as reported by checkpatch
>
> ERROR: Use of const init definition must use __initconst
> +static const char *dra72x_boards_compat[] __initdata = {
Since it looks like you are gonna do another respin, care to separate
out the __initdata to __initconst change for existing ones into a
different patch, and limit this patch to just what the patch subject says.
regards
Suman
>
> Signed-off-by: Rajendra Nayak <rnayak@ti.com>
> ---
> arch/arm/mach-omap2/board-generic.c | 45 ++++++++++++++++++++++++-----------
> 1 file changed, 31 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index b8920b6..dabb9f6 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -43,7 +43,7 @@ static void __init omap_generic_init(void)
> }
>
> #ifdef CONFIG_SOC_OMAP2420
> -static const char *omap242x_boards_compat[] __initdata = {
> +static const char *omap242x_boards_compat[] __initconst = {
> "ti,omap2420",
> NULL,
> };
> @@ -62,7 +62,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_OMAP2430
> -static const char *omap243x_boards_compat[] __initdata = {
> +static const char *omap243x_boards_compat[] __initconst = {
> "ti,omap2430",
> NULL,
> };
> @@ -81,7 +81,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_ARCH_OMAP3
> -static const char *omap3_boards_compat[] __initdata = {
> +static const char *omap3_boards_compat[] __initconst = {
> "ti,omap3430",
> "ti,omap3",
> NULL,
> @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *omap36xx_boards_compat[] __initdata = {
> +static const char *omap36xx_boards_compat[] __initconst = {
> "ti,omap36xx",
> NULL,
> };
> @@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *omap3_gp_boards_compat[] __initdata = {
> +static const char *omap3_gp_boards_compat[] __initconst = {
> "ti,omap3-beagle",
> "timll,omap3-devkit8000",
> NULL,
> @@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
> .restart = omap3xxx_restart,
> MACHINE_END
>
> -static const char *am3517_boards_compat[] __initdata = {
> +static const char *am3517_boards_compat[] __initconst = {
> "ti,am3517",
> NULL,
> };
> @@ -157,7 +157,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_AM33XX
> -static const char *am33xx_boards_compat[] __initdata = {
> +static const char *am33xx_boards_compat[] __initconst = {
> "ti,am33xx",
> NULL,
> };
> @@ -177,7 +177,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_ARCH_OMAP4
> -static const char *omap4_boards_compat[] __initdata = {
> +static const char *omap4_boards_compat[] __initconst = {
> "ti,omap4460",
> "ti,omap4430",
> "ti,omap4",
> @@ -199,7 +199,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_OMAP5
> -static const char *omap5_boards_compat[] __initdata = {
> +static const char *omap5_boards_compat[] __initconst = {
> "ti,omap5432",
> "ti,omap5430",
> "ti,omap5",
> @@ -221,7 +221,7 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_AM43XX
> -static const char *am43_boards_compat[] __initdata = {
> +static const char *am43_boards_compat[] __initconst = {
> "ti,am4372",
> "ti,am43",
> NULL,
> @@ -240,13 +240,13 @@ MACHINE_END
> #endif
>
> #ifdef CONFIG_SOC_DRA7XX
> -static const char *dra7xx_boards_compat[] __initdata = {
> - "ti,dra7xx",
> +static const char *dra74x_boards_compat[] __initconst = {
> + "ti,dra74",
> "ti,dra7",
> NULL,
> };
>
> -DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
> +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
> .reserve = omap_reserve,
> .smp = smp_ops(omap4_smp_ops),
> .map_io = omap5_map_io,
> @@ -255,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
> .init_irq = omap_gic_of_init,
> .init_machine = omap_generic_init,
> .init_time = omap5_realtime_timer_init,
> - .dt_compat = dra7xx_boards_compat,
> + .dt_compat = dra74x_boards_compat,
> + .restart = omap44xx_restart,
> +MACHINE_END
> +
> +static const char *dra72x_boards_compat[] __initconst = {
> + "ti,dra72",
> + NULL,
> +};
> +
> +DT_MACHINE_START(DRA72_DT, "Generic DRA72X (Flattened Device Tree)")
> + .reserve = omap_reserve,
> + .map_io = omap5_map_io,
> + .init_early = dra7xx_init_early,
> + .init_late = dra7xx_init_late,
> + .init_irq = omap_gic_of_init,
> + .init_machine = omap_generic_init,
> + .init_time = omap5_realtime_timer_init,
> + .dt_compat = dra72x_boards_compat,
> .restart = omap44xx_restart,
> MACHINE_END
> #endif
>
next prev parent reply other threads:[~2014-04-24 17:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-24 10:06 [PATCH v3 0/4] ARM: DRA7: Add support for DRA72x devices Rajendra Nayak
2014-04-24 10:06 ` Rajendra Nayak
[not found] ` <1398333987-19454-1-git-send-email-rnayak-l0cyMroinI0@public.gmane.org>
2014-04-24 10:06 ` [PATCH v3 1/4] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible Rajendra Nayak
2014-04-24 10:06 ` Rajendra Nayak
2014-04-24 10:06 ` [PATCH v3 2/4] ARM: dts: Add support for DRA72x family of devices Rajendra Nayak
2014-04-24 10:06 ` Rajendra Nayak
2014-04-24 13:13 ` Arnd Bergmann
2014-04-24 13:13 ` Arnd Bergmann
2014-04-28 6:09 ` Rajendra Nayak
2014-04-28 6:09 ` Rajendra Nayak
[not found] ` <535DF092.7000307-l0cyMroinI0@public.gmane.org>
2014-04-28 8:50 ` Arnd Bergmann
2014-04-28 8:50 ` Arnd Bergmann
2014-04-28 8:55 ` Rajendra Nayak
2014-04-28 8:55 ` Rajendra Nayak
2014-04-24 10:06 ` [PATCH v3 3/4] ARM: OMAP2+: Add machine entry for dra72x devices Rajendra Nayak
2014-04-24 10:06 ` Rajendra Nayak
2014-04-24 17:09 ` Suman Anna [this message]
2014-04-24 17:09 ` Suman Anna
2014-04-28 6:10 ` Rajendra Nayak
2014-04-28 6:10 ` Rajendra Nayak
2014-04-24 10:06 ` [PATCH v3 4/4] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients Rajendra Nayak
2014-04-24 10:06 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53594534.8010100@ti.com \
--to=s-anna@ti.com \
--cc=arnd@arndb.de \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.