From: Michael Schmitz <schmitzmic@gmail.com>
To: Finn Thain <fthain@telegraphics.com.au>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>,
linux-scsi@vger.kernel.org, Sam Creasey <sammy@sammy.net>,
Russell King <linux@arm.linux.org.uk>,
Michael Schmitz <schmitz@debian.org>,
Joe Perches <joe@perches.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-m68k@vger.kernel.org
Subject: Re: [PATCH v2 07/12] scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()
Date: Sat, 26 Apr 2014 13:51:28 +1200 [thread overview]
Message-ID: <535B1120.1020700@gmail.com> (raw)
In-Reply-To: <20140319123518.642821564@telegraphics.com.au>
Acked-by: Michael Schmitz <schmitz@debian.org>
> All NCR5380 drivers already include the NCR5380.h header. Better to
> adopt those macros rather than have three variations on them.
>
> Moreover, the macros in NCR5380.h are preferable anyway: the atari_NCR5380
> and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
> NCR5380_dprint(NDEBUG_MAIN | NDEBUG_QUEUES, ...)
>
> Replace the NCR_PRINT* macros from atari_NCR5380.h and sun3_NCR5380.h with
> the equivalent macros from NCR5380.h.
>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
>
> ---
> drivers/scsi/atari_NCR5380.c | 22 +++++++++++-----------
> drivers/scsi/sun3_NCR5380.c | 22 +++++++++++-----------
> 2 files changed, 22 insertions(+), 22 deletions(-)
>
> Index: linux-m68k/drivers/scsi/atari_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/atari_NCR5380.c 2014-03-19 23:23:02.000000000 +1100
> +++ linux-m68k/drivers/scsi/atari_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> @@ -739,8 +739,8 @@ static void NCR5380_print_status(struct
> Scsi_Cmnd *ptr;
> unsigned long flags;
>
> - NCR_PRINT(NDEBUG_ANY);
> - NCR_PRINT_PHASE(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> + NCR5380_dprint_phase(NDEBUG_ANY, instance);
>
> hostdata = (struct NCR5380_hostdata *)instance->hostdata;
>
> @@ -1268,7 +1268,7 @@ static irqreturn_t NCR5380_intr(int irq,
> INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> - NCR_PRINT(NDEBUG_INTR);
> + NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> ENABLE_IRQ();
> @@ -1396,7 +1396,7 @@ static int NCR5380_select(struct Scsi_Ho
> unsigned long flags;
>
> hostdata->restart_select = 0;
> - NCR_PRINT(NDEBUG_ARBITRATION);
> + NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> @@ -1617,7 +1617,7 @@ static int NCR5380_select(struct Scsi_Ho
> printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
> if (hostdata->restart_select)
> printk(KERN_NOTICE "\trestart select\n");
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return -1;
> }
> @@ -1742,7 +1742,7 @@ static int NCR5380_transfer_pio(struct S
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> - NCR_PRINT_PHASE(NDEBUG_PIO);
> + NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
>
> @@ -1764,18 +1764,18 @@ static int NCR5380_transfer_pio(struct S
> if (!(p & SR_IO)) {
> if (!((p & SR_MSG) && c > 1)) {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ACK);
> } else {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
> }
> } else {
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
> }
>
> @@ -1997,7 +1997,7 @@ static void NCR5380_information_transfer
> phase = (tmp & PHASE_MASK);
> if (phase != old_phase) {
> old_phase = phase;
> - NCR_PRINT_PHASE(NDEBUG_INFORMATION);
> + NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
> }
>
> if (sink && (phase != PHASE_MSGOUT)) {
> @@ -2451,7 +2451,7 @@ static void NCR5380_information_transfer
> break;
> default:
> printk("scsi%d: unknown phase\n", HOSTNO);
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> } /* switch(phase) */
> } /* if (tmp * SR_REQ) */
> } /* while (1) */
> Index: linux-m68k/drivers/scsi/sun3_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:42.000000000 +1100
> +++ linux-m68k/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> @@ -681,8 +681,8 @@ static void NCR5380_print_status(struct
> Scsi_Cmnd *ptr;
> unsigned long flags;
>
> - NCR_PRINT(NDEBUG_ANY);
> - NCR_PRINT_PHASE(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> + NCR5380_dprint_phase(NDEBUG_ANY, instance);
>
> hostdata = (struct NCR5380_hostdata *)instance->hostdata;
>
> @@ -1192,7 +1192,7 @@ static irqreturn_t NCR5380_intr (int irq
> INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> - NCR_PRINT(NDEBUG_INTR);
> + NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> // ENABLE_IRQ();
> @@ -1334,7 +1334,7 @@ static int NCR5380_select(struct Scsi_Ho
> unsigned long flags;
>
> hostdata->restart_select = 0;
> - NCR_PRINT(NDEBUG_ARBITRATION);
> + NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> @@ -1555,7 +1555,7 @@ static int NCR5380_select(struct Scsi_Ho
> printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
> if (hostdata->restart_select)
> printk(KERN_NOTICE "\trestart select\n");
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return -1;
> }
> @@ -1681,7 +1681,7 @@ static int NCR5380_transfer_pio( struct
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> - NCR_PRINT_PHASE(NDEBUG_PIO);
> + NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
>
> @@ -1704,18 +1704,18 @@ static int NCR5380_transfer_pio( struct
> if (!((p & SR_MSG) && c > 1)) {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ACK);
> } else {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
> }
> } else {
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
> }
>
> @@ -1927,7 +1927,7 @@ static void NCR5380_information_transfer
> phase = (tmp & PHASE_MASK);
> if (phase != old_phase) {
> old_phase = phase;
> - NCR_PRINT_PHASE(NDEBUG_INFORMATION);
> + NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
> }
>
> if(phase == PHASE_CMDOUT) {
> @@ -2412,7 +2412,7 @@ static void NCR5380_information_transfer
> break;
> default:
> printk("scsi%d: unknown phase\n", HOSTNO);
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> } /* switch(phase) */
> } /* if (tmp * SR_REQ) */
> } /* while (1) */
>
WARNING: multiple messages have this Message-ID (diff)
From: schmitzmic@gmail.com (Michael Schmitz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/12] scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase()
Date: Sat, 26 Apr 2014 13:51:28 +1200 [thread overview]
Message-ID: <535B1120.1020700@gmail.com> (raw)
In-Reply-To: <20140319123518.642821564@telegraphics.com.au>
Acked-by: Michael Schmitz <schmitz@debian.org>
> All NCR5380 drivers already include the NCR5380.h header. Better to
> adopt those macros rather than have three variations on them.
>
> Moreover, the macros in NCR5380.h are preferable anyway: the atari_NCR5380
> and sun3_NCR5380 versions are inflexible. For example, they can't accomodate
> NCR5380_dprint(NDEBUG_MAIN | NDEBUG_QUEUES, ...)
>
> Replace the NCR_PRINT* macros from atari_NCR5380.h and sun3_NCR5380.h with
> the equivalent macros from NCR5380.h.
>
> Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
>
> ---
> drivers/scsi/atari_NCR5380.c | 22 +++++++++++-----------
> drivers/scsi/sun3_NCR5380.c | 22 +++++++++++-----------
> 2 files changed, 22 insertions(+), 22 deletions(-)
>
> Index: linux-m68k/drivers/scsi/atari_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/atari_NCR5380.c 2014-03-19 23:23:02.000000000 +1100
> +++ linux-m68k/drivers/scsi/atari_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> @@ -739,8 +739,8 @@ static void NCR5380_print_status(struct
> Scsi_Cmnd *ptr;
> unsigned long flags;
>
> - NCR_PRINT(NDEBUG_ANY);
> - NCR_PRINT_PHASE(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> + NCR5380_dprint_phase(NDEBUG_ANY, instance);
>
> hostdata = (struct NCR5380_hostdata *)instance->hostdata;
>
> @@ -1268,7 +1268,7 @@ static irqreturn_t NCR5380_intr(int irq,
> INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> - NCR_PRINT(NDEBUG_INTR);
> + NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> ENABLE_IRQ();
> @@ -1396,7 +1396,7 @@ static int NCR5380_select(struct Scsi_Ho
> unsigned long flags;
>
> hostdata->restart_select = 0;
> - NCR_PRINT(NDEBUG_ARBITRATION);
> + NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> @@ -1617,7 +1617,7 @@ static int NCR5380_select(struct Scsi_Ho
> printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
> if (hostdata->restart_select)
> printk(KERN_NOTICE "\trestart select\n");
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return -1;
> }
> @@ -1742,7 +1742,7 @@ static int NCR5380_transfer_pio(struct S
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> - NCR_PRINT_PHASE(NDEBUG_PIO);
> + NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
>
> @@ -1764,18 +1764,18 @@ static int NCR5380_transfer_pio(struct S
> if (!(p & SR_IO)) {
> if (!((p & SR_MSG) && c > 1)) {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ACK);
> } else {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
> }
> } else {
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
> }
>
> @@ -1997,7 +1997,7 @@ static void NCR5380_information_transfer
> phase = (tmp & PHASE_MASK);
> if (phase != old_phase) {
> old_phase = phase;
> - NCR_PRINT_PHASE(NDEBUG_INFORMATION);
> + NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
> }
>
> if (sink && (phase != PHASE_MSGOUT)) {
> @@ -2451,7 +2451,7 @@ static void NCR5380_information_transfer
> break;
> default:
> printk("scsi%d: unknown phase\n", HOSTNO);
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> } /* switch(phase) */
> } /* if (tmp * SR_REQ) */
> } /* while (1) */
> Index: linux-m68k/drivers/scsi/sun3_NCR5380.c
> ===================================================================
> --- linux-m68k.orig/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:42.000000000 +1100
> +++ linux-m68k/drivers/scsi/sun3_NCR5380.c 2014-03-19 23:34:43.000000000 +1100
> @@ -681,8 +681,8 @@ static void NCR5380_print_status(struct
> Scsi_Cmnd *ptr;
> unsigned long flags;
>
> - NCR_PRINT(NDEBUG_ANY);
> - NCR_PRINT_PHASE(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> + NCR5380_dprint_phase(NDEBUG_ANY, instance);
>
> hostdata = (struct NCR5380_hostdata *)instance->hostdata;
>
> @@ -1192,7 +1192,7 @@ static irqreturn_t NCR5380_intr (int irq
> INT_PRINTK("scsi%d: BASR=%02x\n", HOSTNO, basr);
> /* dispatch to appropriate routine if found and done=0 */
> if (basr & BASR_IRQ) {
> - NCR_PRINT(NDEBUG_INTR);
> + NCR5380_dprint(NDEBUG_INTR, instance);
> if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
> done = 0;
> // ENABLE_IRQ();
> @@ -1334,7 +1334,7 @@ static int NCR5380_select(struct Scsi_Ho
> unsigned long flags;
>
> hostdata->restart_select = 0;
> - NCR_PRINT(NDEBUG_ARBITRATION);
> + NCR5380_dprint(NDEBUG_ARBITRATION, instance);
> ARB_PRINTK("scsi%d: starting arbitration, id = %d\n", HOSTNO,
> instance->this_id);
>
> @@ -1555,7 +1555,7 @@ static int NCR5380_select(struct Scsi_Ho
> printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
> if (hostdata->restart_select)
> printk(KERN_NOTICE "\trestart select\n");
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> return -1;
> }
> @@ -1681,7 +1681,7 @@ static int NCR5380_transfer_pio( struct
> /* Check for phase mismatch */
> if ((tmp & PHASE_MASK) != p) {
> PIO_PRINTK("scsi%d: phase mismatch\n", HOSTNO);
> - NCR_PRINT_PHASE(NDEBUG_PIO);
> + NCR5380_dprint_phase(NDEBUG_PIO, instance);
> break;
> }
>
> @@ -1704,18 +1704,18 @@ static int NCR5380_transfer_pio( struct
> if (!((p & SR_MSG) && c > 1)) {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ACK);
> } else {
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN);
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
> ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
> }
> } else {
> - NCR_PRINT(NDEBUG_PIO);
> + NCR5380_dprint(NDEBUG_PIO, instance);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
> }
>
> @@ -1927,7 +1927,7 @@ static void NCR5380_information_transfer
> phase = (tmp & PHASE_MASK);
> if (phase != old_phase) {
> old_phase = phase;
> - NCR_PRINT_PHASE(NDEBUG_INFORMATION);
> + NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
> }
>
> if(phase == PHASE_CMDOUT) {
> @@ -2412,7 +2412,7 @@ static void NCR5380_information_transfer
> break;
> default:
> printk("scsi%d: unknown phase\n", HOSTNO);
> - NCR_PRINT(NDEBUG_ANY);
> + NCR5380_dprint(NDEBUG_ANY, instance);
> } /* switch(phase) */
> } /* if (tmp * SR_REQ) */
> } /* while (1) */
>
next prev parent reply other threads:[~2014-04-26 1:51 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-19 12:35 [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 01/12] scsi/NCR5380: remove unused BOARD_NORMAL and BOARD_NCR53C400 Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 02/12] scsi/NCR5380: remove redundant HOSTS_C macro tests Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 03/12] scsi/NCR5380: remove old CVS keywords Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 04/12] scsi/NCR5380: use NCR5380_dprint() instead of NCR5380_print() Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 05/12] scsi/NCR5380: fix build failures when debugging is enabled Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 06/12] scsi/NCR5380: fix dprintk macro usage and definition Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 07/12] scsi/NCR5380: adopt NCR5380_dprint() and NCR5380_dprint_phase() Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-04-26 1:51 ` Michael Schmitz [this message]
2014-04-26 1:51 ` Michael Schmitz
2014-03-19 12:35 ` [PATCH v2 08/12] scsi/NCR5380: adopt dprintk() Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-04-26 1:52 ` Michael Schmitz
2014-04-26 1:52 ` Michael Schmitz
2014-03-19 12:35 ` [PATCH v2 09/12] scsi/NCR5380: fix and standardize NDEBUG macros Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 10/12] scsi/NCR5380: remove unused macro definitions Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-04-26 1:53 ` Michael Schmitz
2014-04-26 1:53 ` Michael Schmitz
2014-03-19 12:35 ` [PATCH v2 11/12] scsi/NCR5380: reduce depth of sun3_scsi nested includes Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` [PATCH v2 12/12] scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-03-19 12:35 ` Finn Thain
2014-04-11 14:39 ` [PATCH v2 00/12] scsi/NCR5380: fix debugging macros and #include structure Sam Creasey
2014-04-11 14:39 ` Sam Creasey
2014-04-26 17:21 ` James Bottomley
2014-04-26 17:21 ` James Bottomley
2014-04-29 2:22 ` Finn Thain
2014-04-29 2:22 ` Finn Thain
2014-04-29 3:15 ` Michael Schmitz
2014-04-29 3:15 ` Michael Schmitz
2014-04-29 14:41 ` James Bottomley
2014-04-29 14:41 ` James Bottomley
2014-04-30 7:45 ` Michael Schmitz
2014-04-30 7:45 ` Michael Schmitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=535B1120.1020700@gmail.com \
--to=schmitzmic@gmail.com \
--cc=JBottomley@parallels.com \
--cc=fthain@telegraphics.com.au \
--cc=joe@perches.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=sammy@sammy.net \
--cc=schmitz@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.