diff for duplicates of <535E8F68.7040206@free-electrons.com> diff --git a/a/1.txt b/N1/1.txt index 63b8f36..da058aa 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -3,11 +3,11 @@ On 28/04/2014 18:02, Chen-Yu Tsai wrote: > Hi, > > On Mon, Apr 28, 2014 at 10:58 PM, Boris BREZILLON -> <boris.brezillon@free-electrons.com> wrote: +> <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote: >> Add DT definitions for PRCM (Power/Reset/Clock Management) clock and reset >> controller subdevices. >> ->> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> +>> Signed-off-by: Boris BREZILLON <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> >> --- >> arch/arm/boot/dts/sun6i-a31.dtsi | 49 ++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 49 insertions(+) @@ -17,7 +17,7 @@ On 28/04/2014 18:02, Chen-Yu Tsai wrote: >> --- a/arch/arm/boot/dts/sun6i-a31.dtsi >> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi >> @@ -501,6 +501,55 @@ ->> prcm at 01f01c00 { +>> prcm@01f01c00 { > Seems the address here was wrong to start with. Absolutely, I'll fix it. @@ -27,7 +27,7 @@ Absolutely, I'll fix it. >> reg = <0x01f01400 0x200>; >> + >> + ar100_mux: ar100_mux { -> Might we use clk at 01f01XXX for the names of the clock nodes? +> Might we use clk@01f01XXX for the names of the clock nodes? Actually, I had a discussion with Maxime, and we decided to remove the address suffix because the PRCM block is not a bus, and thus should not @@ -84,7 +84,7 @@ Boris >> + }; >> + >> + apb0_rst: apb0_rst { -> Also use reset at 01f01XXX here? +> Also use reset@01f01XXX here? > >> + compatible = "allwinner,sun6i-a31-clock-reset"; >> + #reset-cells = <1>; diff --git a/a/content_digest b/N1/content_digest index f87d313..1818ef4 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,10 +1,26 @@ "ref\01398697130-8338-1-git-send-email-boris.brezillon@free-electrons.com\0" "ref\01398697130-8338-8-git-send-email-boris.brezillon@free-electrons.com\0" "ref\0CAGb2v67GnW_ziDMjg6zObCAHZrHppGzP=+-VhpWet-NaAzx-Fg@mail.gmail.com\0" - "From\0boris.brezillon@free-electrons.com (Boris BREZILLON)\0" - "Subject\0[PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices\0" + "ref\0CAGb2v67GnW_ziDMjg6zObCAHZrHppGzP=+-VhpWet-NaAzx-Fg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" + "From\0Boris BREZILLON <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices\0" "Date\0Mon, 28 Apr 2014 19:27:04 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>\0" + "Cc\0Emilio L\303\263pez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>" + Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> + Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> + Shuge <shuge-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org> + kevin <kevin-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org> + Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> + Randy Dunlap <rdunlap-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org> + devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + " dev <dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>\0" "\00:1\0" "b\0" "\n" @@ -12,11 +28,11 @@ "> Hi,\n" ">\n" "> On Mon, Apr 28, 2014 at 10:58 PM, Boris BREZILLON\n" - "> <boris.brezillon@free-electrons.com> wrote:\n" + "> <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:\n" ">> Add DT definitions for PRCM (Power/Reset/Clock Management) clock and reset\n" ">> controller subdevices.\n" ">>\n" - ">> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>\n" + ">> Signed-off-by: Boris BREZILLON <boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\n" ">> ---\n" ">> arch/arm/boot/dts/sun6i-a31.dtsi | 49 ++++++++++++++++++++++++++++++++++++++++\n" ">> 1 file changed, 49 insertions(+)\n" @@ -26,7 +42,7 @@ ">> --- a/arch/arm/boot/dts/sun6i-a31.dtsi\n" ">> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi\n" ">> @@ -501,6 +501,55 @@\n" - ">> prcm at 01f01c00 {\n" + ">> prcm@01f01c00 {\n" "> Seems the address here was wrong to start with.\n" "\n" "Absolutely, I'll fix it.\n" @@ -36,7 +52,7 @@ ">> reg = <0x01f01400 0x200>;\n" ">> +\n" ">> + ar100_mux: ar100_mux {\n" - "> Might we use clk at 01f01XXX for the names of the clock nodes?\n" + "> Might we use clk@01f01XXX for the names of the clock nodes?\n" "\n" "Actually, I had a discussion with Maxime, and we decided to remove the\n" "address suffix because the PRCM block is not a bus, and thus should not\n" @@ -93,7 +109,7 @@ ">> + };\n" ">> +\n" ">> + apb0_rst: apb0_rst {\n" - "> Also use reset at 01f01XXX here?\n" + "> Also use reset@01f01XXX here?\n" ">\n" ">> + compatible = \"allwinner,sun6i-a31-clock-reset\";\n" ">> + #reset-cells = <1>;\n" @@ -110,4 +126,4 @@ "Embedded Linux and Kernel engineering\n" http://free-electrons.com -0a84cc0a462c6a82877290638d68ae6fb1bb2db532bc376496df97d54b1540f5 +db55bb8db850e10fdee4523b8e9eeeb5b738fd9f4acbc04adc8a5b1be8789d99
diff --git a/a/1.txt b/N2/1.txt index 63b8f36..15a15f6 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -17,7 +17,7 @@ On 28/04/2014 18:02, Chen-Yu Tsai wrote: >> --- a/arch/arm/boot/dts/sun6i-a31.dtsi >> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi >> @@ -501,6 +501,55 @@ ->> prcm at 01f01c00 { +>> prcm@01f01c00 { > Seems the address here was wrong to start with. Absolutely, I'll fix it. @@ -27,7 +27,7 @@ Absolutely, I'll fix it. >> reg = <0x01f01400 0x200>; >> + >> + ar100_mux: ar100_mux { -> Might we use clk at 01f01XXX for the names of the clock nodes? +> Might we use clk@01f01XXX for the names of the clock nodes? Actually, I had a discussion with Maxime, and we decided to remove the address suffix because the PRCM block is not a bus, and thus should not @@ -84,7 +84,7 @@ Boris >> + }; >> + >> + apb0_rst: apb0_rst { -> Also use reset at 01f01XXX here? +> Also use reset@01f01XXX here? > >> + compatible = "allwinner,sun6i-a31-clock-reset"; >> + #reset-cells = <1>; diff --git a/a/content_digest b/N2/content_digest index f87d313..bc7de54 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,10 +1,25 @@ "ref\01398697130-8338-1-git-send-email-boris.brezillon@free-electrons.com\0" "ref\01398697130-8338-8-git-send-email-boris.brezillon@free-electrons.com\0" "ref\0CAGb2v67GnW_ziDMjg6zObCAHZrHppGzP=+-VhpWet-NaAzx-Fg@mail.gmail.com\0" - "From\0boris.brezillon@free-electrons.com (Boris BREZILLON)\0" - "Subject\0[PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices\0" + "From\0Boris BREZILLON <boris.brezillon@free-electrons.com>\0" + "Subject\0Re: [PATCH 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices\0" "Date\0Mon, 28 Apr 2014 19:27:04 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Chen-Yu Tsai <wens@csie.org>\0" + "Cc\0Emilio L\303\263pez <emilio@elopez.com.ar>" + Mike Turquette <mturquette@linaro.org> + Samuel Ortiz <sameo@linux.intel.com> + Lee Jones <lee.jones@linaro.org> + Maxime Ripard <maxime.ripard@free-electrons.com> + Philipp Zabel <p.zabel@pengutronix.de> + Shuge <shuge@allwinnertech.com> + kevin <kevin@allwinnertech.com> + Hans de Goede <hdegoede@redhat.com> + Randy Dunlap <rdunlap@infradead.org> + devicetree <devicetree@vger.kernel.org> + linux-doc@vger.kernel.org + linux-arm-kernel <linux-arm-kernel@lists.infradead.org> + linux-kernel <linux-kernel@vger.kernel.org> + " dev <dev@linux-sunxi.org>\0" "\00:1\0" "b\0" "\n" @@ -26,7 +41,7 @@ ">> --- a/arch/arm/boot/dts/sun6i-a31.dtsi\n" ">> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi\n" ">> @@ -501,6 +501,55 @@\n" - ">> prcm at 01f01c00 {\n" + ">> prcm@01f01c00 {\n" "> Seems the address here was wrong to start with.\n" "\n" "Absolutely, I'll fix it.\n" @@ -36,7 +51,7 @@ ">> reg = <0x01f01400 0x200>;\n" ">> +\n" ">> + ar100_mux: ar100_mux {\n" - "> Might we use clk at 01f01XXX for the names of the clock nodes?\n" + "> Might we use clk@01f01XXX for the names of the clock nodes?\n" "\n" "Actually, I had a discussion with Maxime, and we decided to remove the\n" "address suffix because the PRCM block is not a bus, and thus should not\n" @@ -93,7 +108,7 @@ ">> + };\n" ">> +\n" ">> + apb0_rst: apb0_rst {\n" - "> Also use reset at 01f01XXX here?\n" + "> Also use reset@01f01XXX here?\n" ">\n" ">> + compatible = \"allwinner,sun6i-a31-clock-reset\";\n" ">> + #reset-cells = <1>;\n" @@ -110,4 +125,4 @@ "Embedded Linux and Kernel engineering\n" http://free-electrons.com -0a84cc0a462c6a82877290638d68ae6fb1bb2db532bc376496df97d54b1540f5 +cb521f87057db98558dbbe65a665bd0b096513fdb7e162ea7c3756640b82c1c1
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.