All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Greear <greearb@candelatech.com>
To: Kalle Valo <kvalo@qca.qualcomm.com>, Bart.Jooris@intec.ugent.be
Cc: ath10k@lists.infradead.org
Subject: Re: Running throughput tests
Date: Mon, 28 Apr 2014 20:55:44 -0700	[thread overview]
Message-ID: <535F22C0.9000403@candelatech.com> (raw)
In-Reply-To: <87lhuvmdjy.fsf@kamboji.qca.qualcomm.com>

On 04/23/2014 11:44 PM, Kalle Valo wrote:
> Bart Jooris <bart.jooris@gmail.com> writes:
>
>> I also have a stable 500Mbps ++ link now :-) with peaks up to 520Mbps
>> (measured with iperf UDP).
>> I've  made a second AP and STA with the WLE900VX cards I've exchanged
>> with Ben (Thanks again!).
>
> Good!
>
>> p.s. The configuration with the sparkLAN WPEA-351AC cards still
>> doesn't give the same results. Probably my bad, I will double check it
>> again.
>
> This is CUS223 based design, right? If you see the problem still try to
> get debug logs. For example, debug_mask=0x432 might give some hints.
>

We tried with the Sparklan today, and it locks up the system soon after we
start hostapd, so we just removed it from the system.  The WLE900VX in same
machine and same config works fine.

Thanks,
Ben

-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2014-04-29  3:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <00ea01cee403$5331f1e0$f995d5a0$@sparklan.com>
     [not found] ` <00d101cee597$e8c57480$ba505d80$@sparklan.com>
     [not found]   ` <52A592B7.9000806@intec.ugent.be>
     [not found]     ` <006301cef71c$d850ec10$88f2c430$@sparklan.com>
     [not found]       ` <52A98706.7080907@intec.ugent.be>
     [not found]         ` <008d01cef722$2a9c05e0$7fd411a0$@sparklan.com>
     [not found]           ` <52A9DEF9.8080305@intec.ugent.be>
     [not found]             ` <012e01cef7e0$99017e70$cb047b50$@sparklan.com>
     [not found]               ` <52AACFB9.8080901@intec.ugent.be>
     [not found]                 ` <006301cefa3c$44c07b50$ce4171f0$@sparklan.com>
     [not found]                   ` <52AEC26B.2060400@intec.ugent.be>
     [not found]                     ` <007f01cefa41$8a940de0$9fbc29a0$@sparklan.com>
     [not found]                       ` <52AEE61F.5030505@intec.ugent.be>
     [not found]                         ` <006b01cefacb$6c0b2d60$44218820$@sparklan.com>
     [not found]                           ` <52B00B10.3050300@intec.ugent.be>
     [not found]                             ` <004b01cefb9d$04a543e0$0defcba0$@sparklan.com>
     [not found]                               ` <52B2AE75.9050206@intec.ugent.be>
     [not found]                                 ` <00df01cf0090$05944f10$10bced30$@sparklan.com>
     [not found]                                   ` <52B9672E.9000701@intec.ugent.be>
     [not found]                                     ` <008c01cf012e$e59563d0$b0c02b70$@sparklan.com>
2014-02-23 21:15                                       ` nl80211: Failed to set channel Bart Jooris
2014-02-24  8:44                                         ` Sven Schnelle
2014-02-24  9:02                                           ` Kalle Valo
2014-02-24 14:59                                           ` Bart Jooris
     [not found]                                           ` <530E5EF2.8070800@intec.ugent.be>
2014-02-27 15:59                                             ` Running throughput tests Kalle Valo
2014-03-28 15:11                                               ` Bart Jooris
2014-03-28 15:31                                                 ` Kalle Valo
2014-03-29 19:42                                                   ` Bart Jooris
2014-03-29 20:18                                                     ` Ben Greear
2014-03-30  7:31                                                       ` Bart Jooris
2014-03-30 17:06                                                         ` Ben Greear
2014-04-08 12:45                                                         ` Kalle Valo
2014-03-30  9:36                                                     ` Bart Jooris
2014-04-08 12:42                                                     ` Kalle Valo
2014-04-19 19:48                                                       ` Bart Jooris
2014-04-24  6:44                                                         ` Kalle Valo
2014-04-29  3:55                                                           ` Ben Greear [this message]
2014-05-12  4:37                                                             ` Kalle Valo
2014-05-12  4:44                                                               ` Ben Greear
2014-05-12  5:14                                                                 ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=535F22C0.9000403@candelatech.com \
    --to=greearb@candelatech.com \
    --cc=Bart.Jooris@intec.ugent.be \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.