[U-Boot] [PATCH 08/12] MX6: add mmdc configuration for MX6Q/MX6DL

[Eric Nelson <eric.nelson@boundarydevices.com>]

Hi Tim,

On 04/29/2014 11:19 AM, Tim Harvey wrote:
> On Tue, Apr 29, 2014 at 8:15 AM, Eric Nelson
> <eric.nelson@boundarydevices.com> wrote:
>> Hi Tim,
>>
>>  <snip>
>>
>>
>> Do you think that someone will want to use SPL on i.MX6 with
>> support for only one of the variants?
>>
>> It seems that this should be conditionally included if
>> i.MX6DQ is supported by the board.
>>
>
> Eric,
>
> Yes - that makes sense. Someone could have a single CPU but have
> several memory variants. I'm not sure how much codespace it will save
> but things are tight at 64KB max.
>
> I can wrap the functions and their calls with an:
>
> #if defined(MX6QDL) || defined(MX6Q) || defined(MX6D)
>

Perfect.

>>
>>> +/* Configure MX6DQ mmdc iomux */
>>> +void mx6dq_dram_iocfg(unsigned width,
>>> +                     const struct mx6dq_iomux_ddr_regs *ddr,
>>> +                     const struct mx6dq_iomux_grp_regs *grp)
>>> +{
>>> +       volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
>>
>>>
>> ...
>>
>> Ditto for i.MX6SDL:
>>
>
> and:
>
> #if defined(MX6QDL) || defined(MX6DL) || defined(MX6S)
>

Cool.