[ath9k-devel] Stable Version for ath9k_htc in AP Mode?

[Oleksij Rempel <linux@rempel-privat.de>]

Am 30.04.2014 22:16, schrieb Oleksij Rempel:
> Am 30.04.2014 20:59, schrieb Aaron Hamilton:
>> Unfortunately our units are in another state, so we're unable to make
>> the electrical connections. If the UART is RS-232, we might be able to
>> modify some locally - but it'll be a rather difficult challenge.
> 
> It is TTL level, 3,3 Volt.
> 
>> Not
>> to mention, we see a great deal of issues in the field, but can't
>> duplicate them here.
> 
> Did you tried to grab hostpad  log to so what kind of connections do you
> have? What is your hostapd config?
> 
>> On the firmware, I'm pulling down io_clean-2014.04.29 right now. I'm
>> assuming this is what I should be using?
> 
> You can use it, but these changes should make sense only if you can get
> oops log from firmware. Or at least FW panic report from dmesg.
> 
> Theoretically this change set should not affect stability.
> 
>> Are there any other options for debugging aside from the UART? We're
>> really in a bind and feel like the only work around is to setup a task
>> to restart hostapd every hour.
> 
> Hmm.. restarting hostpad should not affect firmware. Is it really
> working for you?

Make sure you have CONFIG_ATH_DEBUG enabled. May be we can get some
interesting information. For example WMI timeouts are printed with
ath_dbg which is disable without CONFIG_ATH_DEBUG.

-- 
Regards,
Oleksij

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 278 bytes
Desc: OpenPGP digital signature
Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140430/f37d507a/attachment.pgp