From: Antti Palosaari <crope@iki.fi>
To: CrazyCat <crazycat69@narod.ru>, linux-media@vger.kernel.org
Subject: Re: [PATCH] cxd2820r: TS clock inversion in config
Date: Tue, 06 May 2014 00:11:17 +0300 [thread overview]
Message-ID: <5367FE75.5040208@iki.fi> (raw)
In-Reply-To: <6929939.mWPG6Zt5A4@ubuntu>
That patch does more than it says and due to that I don't want it. Just
implement cxd2820r clock inversion and nothing more. Put the rest stuff,
which does not belong to cxd2820r, to another patch.
Antti
On 05.05.2014 23:46, CrazyCat wrote:
> TS clock inversion in config.
>
> Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
>
> diff --git a/drivers/media/dvb-frontends/cxd2820r.h b/drivers/media/dvb-frontends/cxd2820r.h
> index 82b3d93..6095dbc 100644
> --- a/drivers/media/dvb-frontends/cxd2820r.h
> +++ b/drivers/media/dvb-frontends/cxd2820r.h
> @@ -52,6 +52,12 @@ struct cxd2820r_config {
> */
> u8 ts_mode;
>
> + /* TS clock inverted.
> + * Default: 0
> + * Values: 0, 1
> + */
> + bool ts_clock_inv;
> +
> /* IF AGC polarity.
> * Default: 0
> * Values: 0, 1
> diff --git a/drivers/media/dvb-frontends/cxd2820r_c.c b/drivers/media/dvb-frontends/cxd2820r_c.c
> index 5c6ab49..0f4657e 100644
> --- a/drivers/media/dvb-frontends/cxd2820r_c.c
> +++ b/drivers/media/dvb-frontends/cxd2820r_c.c
> @@ -45,6 +45,7 @@ int cxd2820r_set_frontend_c(struct dvb_frontend *fe)
> { 0x1008b, 0x07, 0xff },
> { 0x1001f, priv->cfg.if_agc_polarity << 7, 0x80 },
> { 0x10070, priv->cfg.ts_mode, 0xff },
> + { 0x10071, !priv->cfg.ts_clock_inv << 4, 0x10 },
> };
>
> dev_dbg(&priv->i2c->dev, "%s: frequency=%d symbol_rate=%d\n", __func__,
> diff --git a/drivers/media/dvb-frontends/cxd2820r_t.c b/drivers/media/dvb-frontends/cxd2820r_t.c
> index fa184ca..9b5a45b 100644
> --- a/drivers/media/dvb-frontends/cxd2820r_t.c
> +++ b/drivers/media/dvb-frontends/cxd2820r_t.c
> @@ -46,6 +46,7 @@ int cxd2820r_set_frontend_t(struct dvb_frontend *fe)
> { 0x00088, 0x01, 0xff },
>
> { 0x00070, priv->cfg.ts_mode, 0xff },
> + { 0x00071, !priv->cfg.ts_clock_inv << 4, 0x10 },
> { 0x000cb, priv->cfg.if_agc_polarity << 6, 0x40 },
> { 0x000a5, 0x00, 0x01 },
> { 0x00082, 0x20, 0x60 },
> diff --git a/drivers/media/dvb-frontends/cxd2820r_t2.c b/drivers/media/dvb-frontends/cxd2820r_t2.c
> index 2ba130e..9c0c4f4 100644
> --- a/drivers/media/dvb-frontends/cxd2820r_t2.c
> +++ b/drivers/media/dvb-frontends/cxd2820r_t2.c
> @@ -47,6 +47,7 @@ int cxd2820r_set_frontend_t2(struct dvb_frontend *fe)
> { 0x02083, 0x0a, 0xff },
> { 0x020cb, priv->cfg.if_agc_polarity << 6, 0x40 },
> { 0x02070, priv->cfg.ts_mode, 0xff },
> + { 0x02071, !priv->cfg.ts_clock_inv << 6, 0x40 },
> { 0x020b5, priv->cfg.spec_inv << 4, 0x10 },
> { 0x02567, 0x07, 0x0f },
> { 0x02569, 0x03, 0x03 },
> diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
> index ae0f56a..7135a3e 100644
> --- a/drivers/media/usb/dvb-usb/dw2102.c
> +++ b/drivers/media/usb/dvb-usb/dw2102.c
> @@ -1109,6 +1109,7 @@ static struct ds3000_config su3000_ds3000_config = {
> static struct cxd2820r_config cxd2820r_config = {
> .i2c_address = 0x6c, /* (0xd8 >> 1) */
> .ts_mode = 0x38,
> + .ts_clock_inv = 1,
> };
>
> static struct tda18271_config tda18271_config = {
> @@ -1387,20 +1388,27 @@ static int su3000_frontend_attach(struct dvb_usb_adapter *d)
>
> static int t220_frontend_attach(struct dvb_usb_adapter *d)
> {
> - u8 obuf[3] = { 0xe, 0x80, 0 };
> + u8 obuf[3] = { 0xe, 0x87, 0 };
> u8 ibuf[] = { 0 };
>
> if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
> err("command 0x0e transfer failed.");
>
> obuf[0] = 0xe;
> - obuf[1] = 0x83;
> + obuf[1] = 0x86;
> + obuf[2] = 1;
> +
> + if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
> + err("command 0x0e transfer failed.");
> +
> + obuf[0] = 0xe;
> + obuf[1] = 0x80;
> obuf[2] = 0;
>
> if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0)
> err("command 0x0e transfer failed.");
>
> - msleep(100);
> + msleep(50);
>
> obuf[0] = 0xe;
> obuf[1] = 0x80;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
http://palosaari.fi/
next prev parent reply other threads:[~2014-05-05 21:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 20:46 [PATCH] cxd2820r: TS clock inversion in config CrazyCat
2014-05-05 21:11 ` Antti Palosaari [this message]
2014-05-27 19:50 ` CrazyCat
-- strict thread matches above, loose matches on Subject: below --
2014-06-03 17:19 [PATCH]cxd2820r: " CrazyCat
2014-06-11 23:19 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5367FE75.5040208@iki.fi \
--to=crope@iki.fi \
--cc=crazycat69@narod.ru \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.