This is going to be off-topic for this forum, but here is a link.

http://www.ti.com/product/wl1835mod

You may want to try putting this question into the Freescale community.

John

On 5/5/14, 4:42 PM, Haizhou Li wrote:

Thanks for reply!

 

I should say what we need is more likely an embedded mini card with SDIO/usb interface. The card should come with baseband, RF, and antenna connector.  We have no plan to design the RF routing. We just plan to hook this minicard to our PCB.  I have not found any mini card based on BCM4329/4330 or TI, yet, but I bet there must be some.  Is there any good candidate that is being used by someone?

 

Thanks!

 

 

From: meta-freescale-bounces@yoctoproject.org [mailto:meta-freescale-bounces@yoctoproject.org] On Behalf Of John Weber
Sent: Monday, May 05, 2014 2:51 PM
To: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] WIFI module choices on Sabre SD board.

 

Wandboard is using BCM4329 and moving to BCM4330.  I believe that Nitrogen6X uses a TI Wilink8 module, and they have done a lot of work to integrate that driver code into the kernel.

John

On 5/5/14, 2:46 PM, Haizhou Li wrote:

Hi,

 

Currently we are developing our prototype project based on Sabre SD board. We will spin our own PCB later. We need wifi support for real-time video streaming. I do my research on google, I saw several options. Some options are quite expensive. Because the product quantity will be large, so I have to choose the module which has a reasonable price and also can work very stable. If anybody is using wifi for their products or know some wifi modules which are compatible with yocto and come with a reasonable price, could you please tell me? 

 

Thanks a lot!

 

Haizhou   

CONFIDENTIALITY / PRIVILEGE NOTE: This communication is confidential and/or privileged, intended only for the personal and confidential use of the recipient(s) named above. Disclosure, copying, distribution or use of the contents of this communication by others is prohibited. If it was not intended for you: (1) stop reading the message itself and/or any attachments; (2) immediately notify me; (3) do not provide it to any other person; (4) delete all copies of it from your computer system; and (5) destroy all hardcopies of it. FOR OFFICIAL USE ONLY.

 

CONFIDENTIALITY / PRIVILEGE NOTE: This communication is confidential and/or privileged, intended only for the personal and confidential use of the recipient(s) named above. Disclosure, copying, distribution or use of the contents of this communication by others is prohibited. If it was not intended for you: (1) stop reading the message itself and/or any attachments; (2) immediately notify me; (3) do not provide it to any other person; (4) delete all copies of it from your computer system; and (5) destroy all hardcopies of it. FOR OFFICIAL USE ONLY.