From: Tomasz Figa <tomasz.figa@gmail.com>
To: Leela Krishna Amudala <l.krishna@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, kgene.kim@samsung.com,
dianders@chromium.org, sjg@chromium.org, thomas.ab@samsung.com,
t.figa@samsung.com, s.nawrocki@samsung.com,
linus.walleij@linaro.org
Subject: Re: [PATCH V2 1/3] ARM: dts: add pinctrl support to Exynos5420
Date: Sat, 15 Jun 2013 22:43:44 +0200 [thread overview]
Message-ID: <5369881.cZ2ryxAGHN@flatron> (raw)
In-Reply-To: <1371214954-29358-2-git-send-email-l.krishna@samsung.com>
On Friday 14 of June 2013 18:32:32 Leela Krishna Amudala wrote:
> Add the required pin configuration support to Exynos5420 using pinctrl
> interface.
>
> Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> ---
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 680
> +++++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi
> | 45 ++
> 2 files changed, 725 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos5420-pinctrl.dtsi
>
> diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi new file mode 100644
> index 0000000..23b7521
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
> @@ -0,0 +1,680 @@
> +/*
> + * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed
> as device + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as +
> * published by the Free Software Foundation.
> +*/
> +
> +/ {
> + pinctrl@13400000 {
> + gpy7: gpy7 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx0: gpx0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&combiner>;
> + #interrupt-cells = <2>;
> + interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
> + <26 0>, <26 1>, <27 0>, <27 1>;
> + };
> +
> + gpx1: gpx1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&combiner>;
> + #interrupt-cells = <2>;
> + interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
> + <30 0>, <30 1>, <31 0>, <31 1>;
> + };
> +
> + gpx2: gpx2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx3: gpx3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pinctrl@13410000 {
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc2: gpc2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc3: gpc3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc4: gpc4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd1: gpd1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpy0: gpy0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy1: gpy1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy2: gpy2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy3: gpy3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy4: gpy4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy5: gpy5 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpy6: gpy6 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpc0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpc0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cd: sd0-cd {
> + samsung,pins = "gpc0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpc0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5",
"gpc0-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2",
"gpc3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
Hmm, weren't you supposed to fix this inconsistency in how above three pin
groups are defined?
Please define them in a way that pins don't overlap between groups.
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpc1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpc1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cd: sd1-cd {
> + samsung,pins = "gpc1-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_int: sd1-int {
> + samsung,pins = "gpd1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpc1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5",
"gpc1-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus8: sd1-bus-width8 {
> + samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6",
"gpd1-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
Same here.
> + sd2_clk: sd2-clk {
> + samsung,pins = "gpc2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cmd: sd2-cmd {
> + samsung,pins = "gpc2-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_cd: sd2-cd {
> + samsung,pins = "gpc2-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus1: sd2-bus-width1 {
> + samsung,pins = "gpc2-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd2_bus4: sd2-bus-width4 {
> + samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5",
"gpc2-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
And same here.
Best regards,
Tomasz
> + };
> +
> + pinctrl@14000000 {
> + gpe0: gpe0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpe1: gpe1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf0: gpf0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpf1: gpf1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg1: gpg1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg2: gpg2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpj4: gpj4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + cam_gpio_a: cam-gpio-a {
> + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2",
"gpe0-3",
> + "gpe0-4", "gpe0-5", "gpe0-6",
"gpe0-7",
> + "gpe1-0", "gpe1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_gpio_b: cam-gpio-b {
> + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2",
"gpf0-3",
> + "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_i2c2_bus: cam-i2c2-bus {
> + samsung,pins = "gpf0-4", "gpf0-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> + cam_spi1_bus: cam-spi1-bus {
> + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2",
"gpf0-3";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_i2c1_bus: cam-i2c1-bus {
> + samsung,pins = "gpf0-2", "gpf0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_i2c0_bus: cam-i2c0-bus {
> + samsung,pins = "gpf0-0", "gpf0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_spi0_bus: cam-spi0-bus {
> + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_bayrgb_bus: cam-bayrgb-bus {
> + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2",
"gpg0-3",
> + "gpg0-4", "gpg0-5", "gpg0-6",
"gpg0-7",
> + "gpg1-0", "gpg1-1", "gpg1-2",
"gpg1-3",
> + "gpg1-4", "gpg1-5", "gpg1-6",
"gpg1-7",
> + "gpg2-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> + };
> +
> + pinctrl@14010000 {
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa2: gpa2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb0: gpb0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb1: gpb1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb2: gpb2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb3: gpb3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb4: gpb4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gph0: gph0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + uart0_data: uart0-data {
> + samsung,pins = "gpa0-0", "gpa0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart0_fctl: uart0-fctl {
> + samsung,pins = "gpa0-2", "gpa0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_data: uart1-data {
> + samsung,pins = "gpa0-4", "gpa0-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_fctl: uart1-fctl {
> + samsung,pins = "gpa0-6", "gpa0-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c2_bus: i2c2-bus {
> + samsung,pins = "gpa0-6", "gpa0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart2_data: uart2-data {
> + samsung,pins = "gpa1-0", "gpa1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart2_fctl: uart2-fctl {
> + samsung,pins = "gpa1-2", "gpa1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c3_bus: i2c3-bus {
> + samsung,pins = "gpa1-2", "gpa1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart3_data: uart3-data {
> + samsung,pins = "gpa1-4", "gpa1-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2",
"gpa2-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c4_hs_bus: i2c4-hs-bus {
> + samsung,pins = "gpa2-0", "gpa2-1";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c5_hs_bus: i2c5-hs-bus {
> + samsung,pins = "gpa2-2", "gpa2-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s1_bus: i2s1-bus {
> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2",
"gpb0-3",
> + "gpb0-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm1_bus: pcm1-bus {
> + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2",
"gpb0-3",
> + "gpb0-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s2_bus: i2s2-bus {
> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2",
"gpb1-3",
> + "gpb1-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm2_bus: pcm2-bus {
> + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2",
"gpb1-3",
> + "gpb1-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spdif_bus: spdif-bus {
> + samsung,pins = "gpb1-0", "gpb1-1";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi2_bus: spi2-bus {
> + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
> + samsung,pin-function = <5>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c6_hs_bus: i2c6-hs-bus {
> + samsung,pins = "gpb1-3", "gpb1-4";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c7_hs_bus: i2c7-hs-bus {
> + samsung,pins = "gpb2-2", "gpb2-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c0_bus: i2c0-bus {
> + samsung,pins = "gpb3-0", "gpb3-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c1_bus: i2c1-bus {
> + samsung,pins = "gpb3-2", "gpb3-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c8_hs_bus: i2c8-hs-bus {
> + samsung,pins = "gpb3-4", "gpb3-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c9_hs_bus: i2c9-hs-bus {
> + samsung,pins = "gpb3-6", "gpb3-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c10_hs_bus: i2c10-hs-bus {
> + samsung,pins = "gpb4-0", "gpb4-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> + };
> +
> + pinctrl@03860000 {
> + gpz: gpz {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + i2s0_bus: i2s0-bus {
> + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
> + "gpz-4", "gpz-5", "gpz-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
> b/arch/arm/boot/dts/exynos5420.dtsi index 577dfe5..e7bf7c7 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -15,9 +15,18 @@
>
> /include/ "skeleton.dtsi"
> /include/ "exynos5.dtsi"
> +/include/ "exynos5420-pinctrl.dtsi"
> / {
> compatible = "samsung,exynos5420";
>
> + aliases {
> + pinctrl0 = &pinctrl_0;
> + pinctrl1 = &pinctrl_1;
> + pinctrl2 = &pinctrl_2;
> + pinctrl3 = &pinctrl_3;
> + pinctrl4 = &pinctrl_4;
> + };
> +
> clock: clock-controller@0x10010000 {
> compatible = "samsung,exynos5420-clock";
> reg = <0x10010000 0x30000>;
> @@ -83,6 +92,42 @@
> };
> };
>
> + pinctrl_0: pinctrl@13400000 {
> + compatible = "samsung,exynos5420-pinctrl";
> + reg = <0x13400000 0x1000>;
> + interrupts = <0 45 0>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos4210-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <0 32 0>;
> + };
> + };
> +
> + pinctrl_1: pinctrl@13410000 {
> + compatible = "samsung,exynos5420-pinctrl";
> + reg = <0x13410000 0x1000>;
> + interrupts = <0 78 0>;
> + };
> +
> + pinctrl_2: pinctrl@14000000 {
> + compatible = "samsung,exynos5420-pinctrl";
> + reg = <0x14000000 0x1000>;
> + interrupts = <0 46 0>;
> + };
> +
> + pinctrl_3: pinctrl@14010000 {
> + compatible = "samsung,exynos5420-pinctrl";
> + reg = <0x14010000 0x1000>;
> + interrupts = <0 50 0>;
> + };
> +
> + pinctrl_4: pinctrl@03860000 {
> + compatible = "samsung,exynos5420-pinctrl";
> + reg = <0x03860000 0x1000>;
> + interrupts = <0 47 0>;
> + };
> +
> serial@12C00000 {
> clocks = <&clock 257>, <&clock 128>;
> };
next prev parent reply other threads:[~2013-06-15 20:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-14 13:02 [PATCH V2 0/3] Add pinctrl support to Exynos5420 Leela Krishna Amudala
2013-06-14 13:02 ` [PATCH V2 1/3] ARM: dts: add " Leela Krishna Amudala
2013-06-15 20:43 ` Tomasz Figa [this message]
2013-06-14 13:02 ` [PATCH V2 2/3] pinctrl: exynos: add exynos5420 SoC specific data Leela Krishna Amudala
2013-06-15 19:52 ` Linus Walleij
2013-06-15 20:46 ` Tomasz Figa
2013-06-18 18:15 ` Doug Anderson
2013-06-14 13:02 ` [PATCH V2 3/3] gpio: samsung: skip gpiolib registration if pinctrl support is enabled for exynos5420 Leela Krishna Amudala
2013-06-15 19:51 ` Linus Walleij
2013-06-15 20:37 ` Tomasz Figa
2013-06-15 20:47 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5369881.cZ2ryxAGHN@flatron \
--to=tomasz.figa@gmail.com \
--cc=dianders@chromium.org \
--cc=kgene.kim@samsung.com \
--cc=l.krishna@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sjg@chromium.org \
--cc=t.figa@samsung.com \
--cc=thomas.ab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.