From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
Date: Wed, 07 May 2014 07:03:34 +0000 [thread overview]
Message-ID: <5369DAC6.6050608@ti.com> (raw)
In-Reply-To: <1398284120-4986-3-git-send-email-marek@goldelico.com>
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: tomi.valkeinen@ti.com (Tomi Valkeinen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
Date: Wed, 7 May 2014 10:03:34 +0300 [thread overview]
Message-ID: <5369DAC6.6050608@ti.com> (raw)
In-Reply-To: <1398284120-4986-3-git-send-email-marek@goldelico.com>
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140507/7c0d2181/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Marek Belisko <marek@goldelico.com>
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
rdunlap@infradead.org, bcousson@baylibre.com, tony@atomide.com,
linux@arm.linux.org.uk, plagnioj@jcrosoft.com,
grant.likely@linaro.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-fbdev@vger.kernel.org, hns@goldelico.com
Subject: Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
Date: Wed, 7 May 2014 10:03:34 +0300 [thread overview]
Message-ID: <5369DAC6.6050608@ti.com> (raw)
In-Reply-To: <1398284120-4986-3-git-send-email-marek@goldelico.com>
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: Marek Belisko <marek@goldelico.com>
Cc: <robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>, <rdunlap@infradead.org>,
<bcousson@baylibre.com>, <tony@atomide.com>,
<linux@arm.linux.org.uk>, <plagnioj@jcrosoft.com>,
<grant.likely@linaro.org>, <devicetree@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-fbdev@vger.kernel.org>, <hns@goldelico.com>
Subject: Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
Date: Wed, 7 May 2014 10:03:34 +0300 [thread overview]
Message-ID: <5369DAC6.6050608@ti.com> (raw)
In-Reply-To: <1398284120-4986-3-git-send-email-marek@goldelico.com>
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-05-07 7:03 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 20:15 [PATCH v2 0/3] Add display support for gta04 device Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` [PATCH v2 1/3] omapdss: panel-tpo-td028ec1: Add DT support Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-05-07 7:03 ` Tomi Valkeinen [this message]
2014-05-07 7:03 ` Tomi Valkeinen
2014-05-07 7:03 ` Tomi Valkeinen
2014-05-07 7:03 ` Tomi Valkeinen
2014-05-07 7:21 ` Belisko Marek
2014-05-07 7:21 ` Belisko Marek
2014-05-07 7:21 ` Belisko Marek
2014-05-08 9:39 ` Tomi Valkeinen
2014-05-08 9:39 ` Tomi Valkeinen
2014-05-08 9:39 ` Tomi Valkeinen
2014-05-08 9:39 ` Tomi Valkeinen
2014-04-23 20:15 ` [PATCH v2 3/3] omapdss: panel-tpo-td028ec1: Add module alias Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-04-23 20:15 ` Marek Belisko
2014-05-07 5:35 ` [PATCH v2 0/3] Add display support for gta04 device Belisko Marek
2014-05-07 5:35 ` Belisko Marek
2014-05-07 5:35 ` Belisko Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5369DAC6.6050608@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.