* [PATCH v2 0/3] Add display support for gta04 device
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-doc, linux-kernel, linux-arm-kernel,
linux-fbdev, hns, Marek Belisko
This 3 patches adding display support for openmoko gta04 device.
First patch add DT bindings for topolly td028 panel. Second add description for
dss + panel and third fix panel probing when panel is compiled as module.
Changes from v1:
- extend panel compatible string by 'omapdss'
- add tpo-td028 panel to dss_compat_conv_list
- add MODULE_ALIAS macro to properly probe panel when is compiled as module
Marek Belisko (3):
omapdss: panel-tpo-td028ec1: Add DT support.
ARM: dts: oma3-gta04: Add display support
omapdss: panel-tpo-td028ec1: Add module alias
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
4 files changed, 149 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
--
1.8.3.2
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 0/3] Add display support for gta04 device
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-fbdev, linux-doc, hns, linux-kernel,
Marek Belisko, linux-arm-kernel
This 3 patches adding display support for openmoko gta04 device.
First patch add DT bindings for topolly td028 panel. Second add description for
dss + panel and third fix panel probing when panel is compiled as module.
Changes from v1:
- extend panel compatible string by 'omapdss'
- add tpo-td028 panel to dss_compat_conv_list
- add MODULE_ALIAS macro to properly probe panel when is compiled as module
Marek Belisko (3):
omapdss: panel-tpo-td028ec1: Add DT support.
ARM: dts: oma3-gta04: Add display support
omapdss: panel-tpo-td028ec1: Add module alias
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
4 files changed, 149 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
--
1.8.3.2
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 0/3] Add display support for gta04 device
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
This 3 patches adding display support for openmoko gta04 device.
First patch add DT bindings for topolly td028 panel. Second add description for
dss + panel and third fix panel probing when panel is compiled as module.
Changes from v1:
- extend panel compatible string by 'omapdss'
- add tpo-td028 panel to dss_compat_conv_list
- add MODULE_ALIAS macro to properly probe panel when is compiled as module
Marek Belisko (3):
omapdss: panel-tpo-td028ec1: Add DT support.
ARM: dts: oma3-gta04: Add display support
omapdss: panel-tpo-td028ec1: Add module alias
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
4 files changed, 149 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
--
1.8.3.2
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 1/3] omapdss: panel-tpo-td028ec1: Add DT support.
2014-04-23 20:15 ` Marek Belisko
(?)
@ 2014-04-23 20:15 ` Marek Belisko
-1 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 32 +++++++++++++++++++++-
3 files changed, 62 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 0000000..7175dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+============
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
+
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 16d33d8..66a2ee0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -566,6 +566,7 @@ static const char * const dss_compat_conv_list[] __initconst = {
"svideo-connector",
"ti,tfp410",
"ti,tpd12s015",
+ "toppoly,td028ttec1",
};
/* prepend compatible string with "omapdss," */
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc..5b3466e 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -206,7 +206,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -389,6 +390,23 @@ static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
return 0;
}
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -418,6 +436,10 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
r = td028ttec1_panel_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = td028ttec1_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -463,6 +485,13 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id td028ttec1_of_match[] = {
+ { .compatible = "omapdss,toppoly,td028ttec1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
@@ -470,6 +499,7 @@ static struct spi_driver td028ttec1_spi_driver = {
.driver = {
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
+ .of_match_table = td028ttec1_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 1/3] omapdss: panel-tpo-td028ec1: Add DT support.
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-doc, linux-kernel, linux-arm-kernel,
linux-fbdev, hns, Marek Belisko
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 32 +++++++++++++++++++++-
3 files changed, 62 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 0000000..7175dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
+
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 16d33d8..66a2ee0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -566,6 +566,7 @@ static const char * const dss_compat_conv_list[] __initconst = {
"svideo-connector",
"ti,tfp410",
"ti,tpd12s015",
+ "toppoly,td028ttec1",
};
/* prepend compatible string with "omapdss," */
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc..5b3466e 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -206,7 +206,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -389,6 +390,23 @@ static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
return 0;
}
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -418,6 +436,10 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
r = td028ttec1_panel_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = td028ttec1_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -463,6 +485,13 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id td028ttec1_of_match[] = {
+ { .compatible = "omapdss,toppoly,td028ttec1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
@@ -470,6 +499,7 @@ static struct spi_driver td028ttec1_spi_driver = {
.driver = {
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
+ .of_match_table = td028ttec1_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 1/3] omapdss: panel-tpo-td028ec1: Add DT support.
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
.../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++++++++++++++
arch/arm/mach-omap2/display.c | 1 +
.../omap2/displays-new/panel-tpo-td028ttec1.c | 32 +++++++++++++++++++++-
3 files changed, 62 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 0000000..7175dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1 at 0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
+
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 16d33d8..66a2ee0 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -566,6 +566,7 @@ static const char * const dss_compat_conv_list[] __initconst = {
"svideo-connector",
"ti,tfp410",
"ti,tpd12s015",
+ "toppoly,td028ttec1",
};
/* prepend compatible string with "omapdss," */
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc..5b3466e 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -206,7 +206,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -389,6 +390,23 @@ static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
return 0;
}
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -418,6 +436,10 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
r = td028ttec1_panel_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = td028ttec1_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -463,6 +485,13 @@ static int td028ttec1_panel_remove(struct spi_device *spi)
return 0;
}
+static const struct of_device_id td028ttec1_of_match[] = {
+ { .compatible = "omapdss,toppoly,td028ttec1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
@@ -470,6 +499,7 @@ static struct spi_driver td028ttec1_spi_driver = {
.driver = {
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
+ .of_match_table = td028ttec1_of_match,
},
};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
2014-04-23 20:15 ` Marek Belisko
(?)
(?)
@ 2014-04-23 20:15 ` Marek Belisko
-1 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
This patch add support for lcd display on gta04 board. Display control
is connected on spi (used spi bitbang driver).
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index f8ad125..db56e67 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -44,6 +44,36 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ spi_lcd {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_pins>;
+
+ gpio-sck = <&gpio1 12 0>;
+ gpio-miso = <&gpio1 18 0>;
+ gpio-mosi = <&gpio1 20 0>;
+ cs-gpios = <&gpio1 19 0>;
+ num-chipselects = <1>;
+
+ /* lcd panel */
+ lcd: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
};
&omap3_pmx_core {
@@ -78,6 +108,47 @@
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ spi_gpio_pins: spi_gpio_pinmux {
+ pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+ 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+ 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+ 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+ >;
+ };
};
&i2c1 {
@@ -219,3 +290,18 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-doc, linux-kernel, linux-arm-kernel,
linux-fbdev, hns, Marek Belisko
This patch add support for lcd display on gta04 board. Display control
is connected on spi (used spi bitbang driver).
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index f8ad125..db56e67 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -44,6 +44,36 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ spi_lcd {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_pins>;
+
+ gpio-sck = <&gpio1 12 0>;
+ gpio-miso = <&gpio1 18 0>;
+ gpio-mosi = <&gpio1 20 0>;
+ cs-gpios = <&gpio1 19 0>;
+ num-chipselects = <1>;
+
+ /* lcd panel */
+ lcd: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
};
&omap3_pmx_core {
@@ -78,6 +108,47 @@
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ spi_gpio_pins: spi_gpio_pinmux {
+ pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+ 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+ 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+ 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+ >;
+ };
};
&i2c1 {
@@ -219,3 +290,18 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-fbdev, linux-doc, hns, linux-kernel,
Marek Belisko, linux-arm-kernel
This patch add support for lcd display on gta04 board. Display control
is connected on spi (used spi bitbang driver).
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index f8ad125..db56e67 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -44,6 +44,36 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ spi_lcd {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_pins>;
+
+ gpio-sck = <&gpio1 12 0>;
+ gpio-miso = <&gpio1 18 0>;
+ gpio-mosi = <&gpio1 20 0>;
+ cs-gpios = <&gpio1 19 0>;
+ num-chipselects = <1>;
+
+ /* lcd panel */
+ lcd: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
};
&omap3_pmx_core {
@@ -78,6 +108,47 @@
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ spi_gpio_pins: spi_gpio_pinmux {
+ pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+ 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+ 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+ 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+ >;
+ };
};
&i2c1 {
@@ -219,3 +290,18 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
This patch add support for lcd display on gta04 board. Display control
is connected on spi (used spi bitbang driver).
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dts
index f8ad125..db56e67 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dts
@@ -44,6 +44,36 @@
ti,mcbsp = <&mcbsp2>;
ti,codec = <&twl_audio>;
};
+
+ spi_lcd {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_pins>;
+
+ gpio-sck = <&gpio1 12 0>;
+ gpio-miso = <&gpio1 18 0>;
+ gpio-mosi = <&gpio1 20 0>;
+ cs-gpios = <&gpio1 19 0>;
+ num-chipselects = <1>;
+
+ /* lcd panel */
+ lcd: td028ttec1 at 0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
};
&omap3_pmx_core {
@@ -78,6 +108,47 @@
0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ spi_gpio_pins: spi_gpio_pinmux {
+ pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
+ 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
+ 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
+ 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+ >;
+ };
};
&i2c1 {
@@ -219,3 +290,18 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = < &dss_dpi_pins >;
+
+ status = "okay";
+
+ vdds_dsi-supply = <&vpll2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+
+};
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
2014-04-23 20:15 ` Marek Belisko
(?)
(?)
@ 2014-05-07 7:03 ` Tomi Valkeinen
-1 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-07 7:03 UTC (permalink / raw)
To: linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-07 7:03 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-07 7:03 UTC (permalink / raw)
To: Marek Belisko
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, grant.likely, devicetree,
linux-doc, linux-kernel, linux-arm-kernel, linux-fbdev, hns
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-07 7:03 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-07 7:03 UTC (permalink / raw)
To: Marek Belisko
Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, grant.likely, devicetree,
linux-doc, linux-kernel, linux-arm-kernel, linux-fbdev, hns
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-07 7:03 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-07 7:03 UTC (permalink / raw)
To: linux-arm-kernel
On 23/04/14 23:15, Marek Belisko wrote:
> This patch add support for lcd display on gta04 board. Display control
> is connected on spi (used spi bitbang driver).
>
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
> 1 file changed, 86 insertions(+)
<snip>
> +&dss {
> + pinctrl-names = "default";
> + pinctrl-0 = < &dss_dpi_pins >;
> +
> + status = "okay";
> +
> + vdds_dsi-supply = <&vpll2>;
> +
> + dpi_out: endpoint {
> + remote-endpoint = <&lcd_in>;
> + data-lines = <24>;
> + };
> +
> +};
>
Did you try this on 3.15-rc? The above is not right, and I don't think
it works. You need 'port' node for the dpi_out endpoint.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140507/7c0d2181/attachment.sig>
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
2014-05-07 7:03 ` Tomi Valkeinen
(?)
@ 2014-05-07 7:21 ` Belisko Marek
-1 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 7:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tomi,
On Wed, May 7, 2014 at 9:03 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> On 23/04/14 23:15, Marek Belisko wrote:
>> This patch add support for lcd display on gta04 board. Display control
>> is connected on spi (used spi bitbang driver).
>>
>> Signed-off-by: Marek Belisko <marek@goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 86 insertions(+)
>
> <snip>
>
>> +&dss {
>> + pinctrl-names = "default";
>> + pinctrl-0 = < &dss_dpi_pins >;
>> +
>> + status = "okay";
>> +
>> + vdds_dsi-supply = <&vpll2>;
>> +
>> + dpi_out: endpoint {
>> + remote-endpoint = <&lcd_in>;
>> + data-lines = <24>;
>> + };
>> +
>> +};
>>
>
> Did you try this on 3.15-rc? The above is not right, and I don't think
> it works. You need 'port' node for the dpi_out endpoint.
This patches was tested against 3.15 series and it works. I'l recheck.
>
> Tomi
>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-07 7:21 ` Belisko Marek
0 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 7:21 UTC (permalink / raw)
To: Tomi Valkeinen
Cc: Rob Herring, Pawel Moll, Mark Rutland,
ijc+devicetree@hellion.org.uk, Kumar Gala, rdunlap,
Benoit Cousson, Tony Lindgren, Russell King - ARM Linux,
Jean-Christophe PLAGNIOL-VILLARD, Grant Likely,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org, LKML,
linux-arm-kernel, linux-fbdev, Dr. H. Nikolaus Schaller
Hi Tomi,
On Wed, May 7, 2014 at 9:03 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> On 23/04/14 23:15, Marek Belisko wrote:
>> This patch add support for lcd display on gta04 board. Display control
>> is connected on spi (used spi bitbang driver).
>>
>> Signed-off-by: Marek Belisko <marek@goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 86 insertions(+)
>
> <snip>
>
>> +&dss {
>> + pinctrl-names = "default";
>> + pinctrl-0 = < &dss_dpi_pins >;
>> +
>> + status = "okay";
>> +
>> + vdds_dsi-supply = <&vpll2>;
>> +
>> + dpi_out: endpoint {
>> + remote-endpoint = <&lcd_in>;
>> + data-lines = <24>;
>> + };
>> +
>> +};
>>
>
> Did you try this on 3.15-rc? The above is not right, and I don't think
> it works. You need 'port' node for the dpi_out endpoint.
This patches was tested against 3.15 series and it works. I'l recheck.
>
> Tomi
>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-07 7:21 ` Belisko Marek
0 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 7:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tomi,
On Wed, May 7, 2014 at 9:03 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
> On 23/04/14 23:15, Marek Belisko wrote:
>> This patch add support for lcd display on gta04 board. Display control
>> is connected on spi (used spi bitbang driver).
>>
>> Signed-off-by: Marek Belisko <marek@goldelico.com>
>> ---
>> arch/arm/boot/dts/omap3-gta04.dts | 86 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 86 insertions(+)
>
> <snip>
>
>> +&dss {
>> + pinctrl-names = "default";
>> + pinctrl-0 = < &dss_dpi_pins >;
>> +
>> + status = "okay";
>> +
>> + vdds_dsi-supply = <&vpll2>;
>> +
>> + dpi_out: endpoint {
>> + remote-endpoint = <&lcd_in>;
>> + data-lines = <24>;
>> + };
>> +
>> +};
>>
>
> Did you try this on 3.15-rc? The above is not right, and I don't think
> it works. You need 'port' node for the dpi_out endpoint.
This patches was tested against 3.15 series and it works. I'l recheck.
>
> Tomi
>
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
2014-05-07 7:21 ` Belisko Marek
(?)
(?)
@ 2014-05-08 9:39 ` Tomi Valkeinen
-1 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-08 9:39 UTC (permalink / raw)
To: linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
On 07/05/14 10:21, Belisko Marek wrote:
>> Did you try this on 3.15-rc? The above is not right, and I don't think
>> it works. You need 'port' node for the dpi_out endpoint.
> This patches was tested against 3.15 series and it works. I'l recheck.
Ah, we still have some code that makes that work. But it's against the
bindings documentations, and that code will be removed. So better add
the port node.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-08 9:39 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-08 9:39 UTC (permalink / raw)
To: Belisko Marek
Cc: Rob Herring, Pawel Moll, Mark Rutland,
ijc+devicetree@hellion.org.uk, Kumar Gala, rdunlap,
Benoit Cousson, Tony Lindgren, Russell King - ARM Linux,
Jean-Christophe PLAGNIOL-VILLARD, Grant Likely,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org, LKML,
linux-arm-kernel, linux-fbdev, Dr. H. Nikolaus Schaller
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
On 07/05/14 10:21, Belisko Marek wrote:
>> Did you try this on 3.15-rc? The above is not right, and I don't think
>> it works. You need 'port' node for the dpi_out endpoint.
> This patches was tested against 3.15 series and it works. I'l recheck.
Ah, we still have some code that makes that work. But it's against the
bindings documentations, and that code will be removed. So better add
the port node.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-08 9:39 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-08 9:39 UTC (permalink / raw)
To: Belisko Marek
Cc: Rob Herring, Pawel Moll, Mark Rutland,
ijc+devicetree@hellion.org.uk, Kumar Gala, rdunlap,
Benoit Cousson, Tony Lindgren, Russell King - ARM Linux,
Jean-Christophe PLAGNIOL-VILLARD, Grant Likely,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org, LKML,
linux-arm-kernel, linux-fbdev, Dr. H. Nikolaus Schaller
[-- Attachment #1: Type: text/plain, Size: 427 bytes --]
On 07/05/14 10:21, Belisko Marek wrote:
>> Did you try this on 3.15-rc? The above is not right, and I don't think
>> it works. You need 'port' node for the dpi_out endpoint.
> This patches was tested against 3.15 series and it works. I'l recheck.
Ah, we still have some code that makes that work. But it's against the
bindings documentations, and that code will be removed. So better add
the port node.
Tomi
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 2/3] ARM: dts: oma3-gta04: Add display support
@ 2014-05-08 9:39 ` Tomi Valkeinen
0 siblings, 0 replies; 28+ messages in thread
From: Tomi Valkeinen @ 2014-05-08 9:39 UTC (permalink / raw)
To: linux-arm-kernel
On 07/05/14 10:21, Belisko Marek wrote:
>> Did you try this on 3.15-rc? The above is not right, and I don't think
>> it works. You need 'port' node for the dpi_out endpoint.
> This patches was tested against 3.15 series and it works. I'l recheck.
Ah, we still have some code that makes that work. But it's against the
bindings documentations, and that code will be removed. So better add
the port node.
Tomi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140508/6772b777/attachment.sig>
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 3/3] omapdss: panel-tpo-td028ec1: Add module alias
2014-04-23 20:15 ` Marek Belisko
(?)
@ 2014-04-23 20:15 ` Marek Belisko
-1 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index 5b3466e..728808b 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -505,6 +505,7 @@ static struct spi_driver td028ttec1_spi_driver = {
module_spi_driver(td028ttec1_spi_driver);
+MODULE_ALIAS("spi:toppoly,td028ttec1");
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 3/3] omapdss: panel-tpo-td028ec1: Add module alias
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
bcousson, tony, linux, plagnioj, tomi.valkeinen, grant.likely
Cc: devicetree, linux-doc, linux-kernel, linux-arm-kernel,
linux-fbdev, hns, Marek Belisko
Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index 5b3466e..728808b 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -505,6 +505,7 @@ static struct spi_driver td028ttec1_spi_driver = {
module_spi_driver(td028ttec1_spi_driver);
+MODULE_ALIAS("spi:toppoly,td028ttec1");
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread* [PATCH v2 3/3] omapdss: panel-tpo-td028ec1: Add module alias
@ 2014-04-23 20:15 ` Marek Belisko
0 siblings, 0 replies; 28+ messages in thread
From: Marek Belisko @ 2014-04-23 20:15 UTC (permalink / raw)
To: linux-arm-kernel
Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index 5b3466e..728808b 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -505,6 +505,7 @@ static struct spi_driver td028ttec1_spi_driver = {
module_spi_driver(td028ttec1_spi_driver);
+MODULE_ALIAS("spi:toppoly,td028ttec1");
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
--
1.8.3.2
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH v2 0/3] Add display support for gta04 device
2014-04-23 20:15 ` Marek Belisko
(?)
@ 2014-05-07 5:35 ` Belisko Marek
-1 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 5:35 UTC (permalink / raw)
To: linux-arm-kernel
Tomi,
any objections to this patch set? If not can you please take it? Thanks.
On Wed, Apr 23, 2014 at 10:15 PM, Marek Belisko <marek@goldelico.com> wrote:
> This 3 patches adding display support for openmoko gta04 device.
> First patch add DT bindings for topolly td028 panel. Second add description for
> dss + panel and third fix panel probing when panel is compiled as module.
>
> Changes from v1:
> - extend panel compatible string by 'omapdss'
> - add tpo-td028 panel to dss_compat_conv_list
> - add MODULE_ALIAS macro to properly probe panel when is compiled as module
>
> Marek Belisko (3):
> omapdss: panel-tpo-td028ec1: Add DT support.
> ARM: dts: oma3-gta04: Add display support
> omapdss: panel-tpo-td028ec1: Add module alias
>
> .../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
> arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
> arch/arm/mach-omap2/display.c | 1 +
> .../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
> 4 files changed, 149 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
>
> --
> 1.8.3.2
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v2 0/3] Add display support for gta04 device
@ 2014-05-07 5:35 ` Belisko Marek
0 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 5:35 UTC (permalink / raw)
To: Rob Herring, Pawel Moll, Mark Rutland,
ijc+devicetree@hellion.org.uk, Kumar Gala, rdunlap,
Benoit Cousson, Tony Lindgren, Russell King - ARM Linux,
Jean-Christophe PLAGNIOL-VILLARD, Tomi Valkeinen, Grant Likely
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org, LKML,
linux-arm-kernel, linux-fbdev, Dr. H. Nikolaus Schaller,
Marek Belisko
Tomi,
any objections to this patch set? If not can you please take it? Thanks.
On Wed, Apr 23, 2014 at 10:15 PM, Marek Belisko <marek@goldelico.com> wrote:
> This 3 patches adding display support for openmoko gta04 device.
> First patch add DT bindings for topolly td028 panel. Second add description for
> dss + panel and third fix panel probing when panel is compiled as module.
>
> Changes from v1:
> - extend panel compatible string by 'omapdss'
> - add tpo-td028 panel to dss_compat_conv_list
> - add MODULE_ALIAS macro to properly probe panel when is compiled as module
>
> Marek Belisko (3):
> omapdss: panel-tpo-td028ec1: Add DT support.
> ARM: dts: oma3-gta04: Add display support
> omapdss: panel-tpo-td028ec1: Add module alias
>
> .../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
> arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
> arch/arm/mach-omap2/display.c | 1 +
> .../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
> 4 files changed, 149 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
>
> --
> 1.8.3.2
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v2 0/3] Add display support for gta04 device
@ 2014-05-07 5:35 ` Belisko Marek
0 siblings, 0 replies; 28+ messages in thread
From: Belisko Marek @ 2014-05-07 5:35 UTC (permalink / raw)
To: linux-arm-kernel
Tomi,
any objections to this patch set? If not can you please take it? Thanks.
On Wed, Apr 23, 2014 at 10:15 PM, Marek Belisko <marek@goldelico.com> wrote:
> This 3 patches adding display support for openmoko gta04 device.
> First patch add DT bindings for topolly td028 panel. Second add description for
> dss + panel and third fix panel probing when panel is compiled as module.
>
> Changes from v1:
> - extend panel compatible string by 'omapdss'
> - add tpo-td028 panel to dss_compat_conv_list
> - add MODULE_ALIAS macro to properly probe panel when is compiled as module
>
> Marek Belisko (3):
> omapdss: panel-tpo-td028ec1: Add DT support.
> ARM: dts: oma3-gta04: Add display support
> omapdss: panel-tpo-td028ec1: Add module alias
>
> .../bindings/video/toppoly,td028ttec1.txt | 30 ++++++++
> arch/arm/boot/dts/omap3-gta04.dts | 86 ++++++++++++++++++++++
> arch/arm/mach-omap2/display.c | 1 +
> .../omap2/displays-new/panel-tpo-td028ttec1.c | 33 ++++++++-
> 4 files changed, 149 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
>
> --
> 1.8.3.2
>
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 28+ messages in thread