mx6qsabresd hangs on linux-next

[maxime.coquelin@st.com (Maxime Coquelin)]

Hi Shawn,

On 05/07/2014 05:32 AM, Shawn Guo wrote:
...
>>>
>>> Here when a table entry matches the input div this function will return
>>> exactly the input div. This means _next_div() will always return the
>>> same value and clk_divider_bestdiv() has an infinite loop:
>>>
>>> 	for (i = 1; i <= maxdiv; i = _next_div(divider, i)) {
>>> 		...
>>> 	}
>>
>> Hmmm, isn't the first thing that _next_div() does to increment the input
>> div?
>
> I think the infinite loop happens in this case because "i" will never
> exceed maxdiv for a table divider.

You are right. Sorry for the regression.

I thought I tested it, as I had some table-based dividers in my test setup.
After checking again, it appears that I didn't had the 
CLK_SET_RATE_PARENT flag set on these clocks, so I didn't entered the 
for loop...

Could the fix be to initialize "up" variable to INT_MAX in 
_round_up_table (see below)?

I can send the patch if you are fine with it.
I have no hardware to test on this week, I only have compiled this 
patch, not tested it.

Thanks,
Maxime

>
> Shawn
>


diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index b3c8396..cf9114a 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -158,7 +158,7 @@ static bool _is_valid_div(struct clk_divider 
*divider, unsigned int div)
  static int _round_up_table(const struct clk_div_table *table, int div)
  {
         const struct clk_div_table *clkt;
-       int up = _get_table_maxdiv(table);
+       int up = INT_MAX;

         for (clkt = table; clkt->div; clkt++) {
                 if (clkt->div == div)