From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <536BE25E.7040203@gmail.com>
Date: Thu, 08 May 2014 22:00:30 +0200
From: Wojciech Domski <wojciech.domski@gmail.com>
MIME-Version: 1.0
References: <CACKc53+X9XQ1tqJXrcW8qLrmBVoCfDvqozjVwMDWEQUabHL2oA@mail.gmail.com>
In-Reply-To: <CACKc53+X9XQ1tqJXrcW8qLrmBVoCfDvqozjVwMDWEQUabHL2oA@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai] Configuring analog subdevice via analogy interface
List-Id: Discussions about the Xenomai project <xenomai.xenomai.org>
List-Unsubscribe: <http://www.xenomai.org/mailman/options/xenomai>,
 <mailto:xenomai-request@xenomai.org?subject=unsubscribe>
List-Archive: <http://www.xenomai.org/pipermail/xenomai/>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-request@xenomai.org?subject=help>
List-Subscribe: <http://www.xenomai.org/mailman/listinfo/xenomai>,
 <mailto:xenomai-request@xenomai.org?subject=subscribe>
To: xenomai@xenomai.org

W dniu 2014-04-17 13:14, Wojciech Domski pisze:
> Dear all,
>
> I have question concerning analog subdevice support in Analogy.
>
> I have signal Sensoray 626 which is capable of setting range
> for analog input to +/-5V or +/-10V. During writing the driver
> for Sensoray 626 I have ported a function which address
> is put into field of subdevice structure do_cmd.
>
> This function can configure multiple channels of analog
> subdevice separately. However, what should I use from
> User Space interface to invoke this function (do_cmd)
> in kernel space?
>
> I have tried using a4l_snd_command but this one
> seems to be dedicated for digital subdevices.
> Is there a way to do what I want to?
>
> Best regards,
> Wojciech Domski
>
> Domski.pl
I kindly ask you for any inside in above matter.

Wojciech Domski

Domski.pl

Wojciech.Domski.pl