From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mike Christie Subject: Re: [PATCH 00/10] qla4xxx: 5.04.00-k5: Updates for scsi "misc" branch Date: Thu, 08 May 2014 16:27:04 -0500 Message-ID: <536BF6A8.1090404@cs.wisc.edu> References: <1393297625-928-1-git-send-email-vikas.chaudhary@qlogic.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from sabe.cs.wisc.edu ([128.105.6.20]:39471 "EHLO sabe.cs.wisc.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755323AbaEHV1R (ORCPT ); Thu, 8 May 2014 17:27:17 -0400 In-Reply-To: <1393297625-928-1-git-send-email-vikas.chaudhary@qlogic.com> Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: vikas.chaudhary@qlogic.com Cc: jbottomley@parallels.com, linux-scsi@vger.kernel.org, lalit.chandivade@qlogic.com On 02/24/2014 09:06 PM, vikas.chaudhary@qlogic.com wrote: > From: Vikas Chaudhary > > James, > > Please apply the following patches to the scsi tree at your earliest convenience. > > Tej Parkash (5): > qla4xxx: Do not wait for IO completion, after issuing stop_firmware > qla4xxx: Change default capture to firmware defined capture mask > qla4xxx: Add support of 0xFF capture mask for minidump > qla4xxx: Added new opcodes for 84XX Minidump template > qla4xxx: Added PEX DMA Support for ISP8022 Adapter > > Vikas Chaudhary (5): > qla4xxx: qla4xxx: Move qla4_8xxx_ms_mem_write_128b to ql4_nx.c > qla4xxx: Check for correct return status > qla4xxx: Initialize hardware queue for ISP40XX > qla4xxx: Fix memory leak in func qla4_84xx_config_acb() > qla4xxx: Update driver version to 5.04.00-k5 > I guess my concerns about a mem leak are fixed in the patchset sent on 4/9 "qla4xxx: 5.04.00-k6: Updates for scsi "misc" branch". I thought the name of some define in this set was silly, but I guess it is fine and will be changed later. So patches look ok. Reviewed-by: Mike Christie