[U-Boot] [PATCH 1/4] power: make pfuze100 be able to coexist with other pmics

[Stefano Babic <sbabic@denx.de>]

On 23/04/2014 06:53, Tim Harvey wrote:
> Avoid uding pmic_init() as this forces the model of only allowing a
> single PMIC driver to be built at a time.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  drivers/power/pmic/pmic_pfuze100.c | 2 +-
>  include/power/pfuze100_pmic.h      | 1 +
>  2 files changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/pmic_pfuze100.c b/drivers/power/pmic/pmic_pfuze100.c
> index 22c1f15..21f12d2 100644
> --- a/drivers/power/pmic/pmic_pfuze100.c
> +++ b/drivers/power/pmic/pmic_pfuze100.c
> @@ -11,7 +11,7 @@
>  #include <power/pmic.h>
>  #include <power/pfuze100_pmic.h>
>  
> -int pmic_init(unsigned char bus)
> +int power_pfuze100_init(unsigned char bus)
>  {
>  	static const char name[] = "PFUZE100_PMIC";
>  	struct pmic *p = pmic_alloc();
> diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
> index 2a9032a..444aba6 100644
> --- a/include/power/pfuze100_pmic.h
> +++ b/include/power/pfuze100_pmic.h
> @@ -93,4 +93,5 @@ enum {
>  #define SWBST_MODE_AUTO	(2 << 2)
>  #define SWBST_MODE_APS	(2 << 3)
>  
> +int power_pfuze100_init(unsigned char bus);
>  #endif
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================