From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] Autobuilder news
Date: Sat, 10 May 2014 22:28:27 +0200 [thread overview]
Message-ID: <536E8BEB.7020300@mind.be> (raw)
In-Reply-To: <20140504223611.5a6177c1@skate>
On 04/05/14 22:36, Thomas Petazzoni wrote:
> Hello,
>
> Two news about the autobuilders:
>
> * The Crosstool-NG external toolchain configurations have been updated
> and slightly extended. Yann E. Morin has provided me with a good set
> of more up-to-date toolchains generated by Crosstool-NG, and I've
> added them to the Free Electrons autobuilders, as a replacement for
> the old ones. The new configurations are:
>
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv5-ctng-linux-gnueabi.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv6-ctng-linux-uclibcgnueabi.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv7-ctng-linux-gnueabihf.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/i486-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/i686-ctng-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mips64el-ctng_n32-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mips64el-ctng_n64-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mipsel-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/powerpc-ctng_e500v2-linux-gnuspe.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/powerpc-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/x86_64-ctng_locales-linux-gnu.config
Hi Thomas,
Is it possible that you installed new binaries with the same name but a
different ctng configuration? That's a bit annoying because it breaks
reproducibility... It's OK to remove the old toolchains, but it would be good if
the new ones would have a different name.
Regards,
Arnout
>
> * As stated in another e-mail, the Free Electrons autobuilder
> machine has been updated. It has twice the amount of RAM it used
> to have (16 GB replaced by 32 GB), and a better storage system (SAS
> 10k disks instead of regular disks). Hopefully this should allow to
> have more configurations tested every day.
>
> Best regards,
>
> Thomas
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2014-05-10 20:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-04 20:36 [Buildroot] Autobuilder news Thomas Petazzoni
2014-05-04 21:32 ` Luca Ceresoli
2014-05-10 20:28 ` Arnout Vandecappelle [this message]
2014-05-11 16:07 ` Thomas Petazzoni
2014-05-11 16:29 ` Thomas Petazzoni
2014-05-11 20:37 ` Arnout Vandecappelle
2014-05-11 21:14 ` Thomas Petazzoni
-- strict thread matches above, loose matches on Subject: below --
2014-08-29 21:26 Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536E8BEB.7020300@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.