From: "Frank Schäfer" <fschaefer.oss@googlemail.com>
To: Hans Verkuil <hverkuil@xs4all.nl>, m.chehab@samsung.com
Cc: linux-media@vger.kernel.org
Subject: Re: [PATCH 03/19] em28xx: start moving em28xx-v4l specific data to its own struct
Date: Sun, 11 May 2014 22:46:48 +0200 [thread overview]
Message-ID: <536FE1B8.2090603@googlemail.com> (raw)
In-Reply-To: <536C9D1F.7040804@xs4all.nl>
Am 09.05.2014 11:17, schrieb Hans Verkuil:
> Some comments for future improvements:
>
> On 03/24/2014 08:33 PM, Frank Schäfer wrote:
>> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
>> ---
>> drivers/media/usb/em28xx/em28xx-camera.c | 4 +-
>> drivers/media/usb/em28xx/em28xx-video.c | 160 +++++++++++++++++++++----------
>> drivers/media/usb/em28xx/em28xx.h | 8 +-
>> 3 files changed, 116 insertions(+), 56 deletions(-)
>>
>> diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
>> index 505e050..daebef3 100644
>> --- a/drivers/media/usb/em28xx/em28xx-camera.c
>> +++ b/drivers/media/usb/em28xx/em28xx-camera.c
>> @@ -365,7 +365,7 @@ int em28xx_init_camera(struct em28xx *dev)
>> dev->sensor_xtal = 4300000;
>> pdata.xtal = dev->sensor_xtal;
>> if (NULL ==
>> - v4l2_i2c_new_subdev_board(&dev->v4l2_dev, adap,
>> + v4l2_i2c_new_subdev_board(&dev->v4l2->v4l2_dev, adap,
>> &mt9v011_info, NULL)) {
>> ret = -ENODEV;
>> break;
>> @@ -422,7 +422,7 @@ int em28xx_init_camera(struct em28xx *dev)
>> dev->sensor_yres = 480;
>>
>> subdev =
>> - v4l2_i2c_new_subdev_board(&dev->v4l2_dev, adap,
>> + v4l2_i2c_new_subdev_board(&dev->v4l2->v4l2_dev, adap,
>> &ov2640_info, NULL);
>> if (NULL == subdev) {
>> ret = -ENODEV;
>> diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
>> index 45ad471..89947db 100644
>> --- a/drivers/media/usb/em28xx/em28xx-video.c
>> +++ b/drivers/media/usb/em28xx/em28xx-video.c
>> @@ -189,10 +189,11 @@ static int em28xx_vbi_supported(struct em28xx *dev)
>> */
>> static void em28xx_wake_i2c(struct em28xx *dev)
>> {
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0);
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
>> + struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
>> + v4l2_device_call_all(v4l2_dev, 0, core, reset, 0);
>> + v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
>> INPUT(dev->ctl_input)->vmux, 0, 0);
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
>> + v4l2_device_call_all(v4l2_dev, 0, video, s_stream, 0);
>> }
>>
>> static int em28xx_colorlevels_set_default(struct em28xx *dev)
>> @@ -952,7 +953,8 @@ int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count)
>> f.type = V4L2_TUNER_RADIO;
>> else
>> f.type = V4L2_TUNER_ANALOG_TV;
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev,
>> + 0, tuner, s_frequency, &f);
>> }
>>
>> dev->streaming_users++;
>> @@ -1083,6 +1085,7 @@ static int em28xx_vb2_setup(struct em28xx *dev)
>>
>> static void video_mux(struct em28xx *dev, int index)
>> {
>> + struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
>> dev->ctl_input = index;
>> dev->ctl_ainput = INPUT(index)->amux;
>> dev->ctl_aoutput = INPUT(index)->aout;
>> @@ -1090,21 +1093,21 @@ static void video_mux(struct em28xx *dev, int index)
>> if (!dev->ctl_aoutput)
>> dev->ctl_aoutput = EM28XX_AOUT_MASTER;
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
>> + v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
>> INPUT(index)->vmux, 0, 0);
>>
>> if (dev->board.has_msp34xx) {
>> if (dev->i2s_speed) {
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, audio,
>> + v4l2_device_call_all(v4l2_dev, 0, audio,
>> s_i2s_clock_freq, dev->i2s_speed);
>> }
>> /* Note: this is msp3400 specific */
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing,
>> + v4l2_device_call_all(v4l2_dev, 0, audio, s_routing,
>> dev->ctl_ainput, MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0);
>> }
>>
>> if (dev->board.adecoder != EM28XX_NOADECODER) {
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing,
>> + v4l2_device_call_all(v4l2_dev, 0, audio, s_routing,
>> dev->ctl_ainput, dev->ctl_aoutput, 0);
>> }
>>
>> @@ -1344,7 +1347,7 @@ static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm)
>> struct em28xx_fh *fh = priv;
>> struct em28xx *dev = fh->dev;
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, video, querystd, norm);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, video, querystd, norm);
>>
>> return 0;
>> }
>> @@ -1374,7 +1377,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
>> size_to_scale(dev, dev->width, dev->height, &dev->hscale, &dev->vscale);
>>
>> em28xx_resolution_set(dev);
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, core, s_std, dev->norm);
>>
>> return 0;
>> }
>> @@ -1388,7 +1391,7 @@ static int vidioc_g_parm(struct file *file, void *priv,
>>
>> p->parm.capture.readbuffers = EM28XX_MIN_BUF;
>> if (dev->board.is_webcam)
>> - rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0,
>> + rc = v4l2_device_call_until_err(&dev->v4l2->v4l2_dev, 0,
>> video, g_parm, p);
>> else
>> v4l2_video_std_frame_period(dev->norm,
>> @@ -1404,7 +1407,8 @@ static int vidioc_s_parm(struct file *file, void *priv,
>> struct em28xx *dev = fh->dev;
>>
>> p->parm.capture.readbuffers = EM28XX_MIN_BUF;
>> - return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p);
>> + return v4l2_device_call_until_err(&dev->v4l2->v4l2_dev,
>> + 0, video, s_parm, p);
>> }
>>
>> static const char *iname[] = {
>> @@ -1543,7 +1547,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
>>
>> strcpy(t->name, "Tuner");
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
>> return 0;
>> }
>>
>> @@ -1556,7 +1560,7 @@ static int vidioc_s_tuner(struct file *file, void *priv,
>> if (0 != t->index)
>> return -EINVAL;
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
>> return 0;
>> }
>>
>> @@ -1576,15 +1580,16 @@ static int vidioc_g_frequency(struct file *file, void *priv,
>> static int vidioc_s_frequency(struct file *file, void *priv,
>> const struct v4l2_frequency *f)
>> {
>> - struct v4l2_frequency new_freq = *f;
>> - struct em28xx_fh *fh = priv;
>> - struct em28xx *dev = fh->dev;
>> + struct v4l2_frequency new_freq = *f;
>> + struct em28xx_fh *fh = priv;
>> + struct em28xx *dev = fh->dev;
>> + struct em28xx_v4l2 *v4l2 = dev->v4l2;
>>
>> if (0 != f->tuner)
>> return -EINVAL;
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f);
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, &new_freq);
>> + v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, s_frequency, f);
>> + v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, g_frequency, &new_freq);
>> dev->ctl_freq = new_freq.frequency;
>>
>> return 0;
>> @@ -1602,7 +1607,8 @@ static int vidioc_g_chip_info(struct file *file, void *priv,
>> if (chip->match.addr == 1)
>> strlcpy(chip->name, "ac97", sizeof(chip->name));
>> else
>> - strlcpy(chip->name, dev->v4l2_dev.name, sizeof(chip->name));
>> + strlcpy(chip->name,
>> + dev->v4l2->v4l2_dev.name, sizeof(chip->name));
>> return 0;
>> }
>>
>> @@ -1814,7 +1820,7 @@ static int radio_g_tuner(struct file *file, void *priv,
>>
>> strcpy(t->name, "Radio");
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
>>
>> return 0;
>> }
>> @@ -1827,12 +1833,26 @@ static int radio_s_tuner(struct file *file, void *priv,
>> if (0 != t->index)
>> return -EINVAL;
>>
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t);
>> + v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
>>
>> return 0;
>> }
>>
>> /*
>> + * em28xx_free_v4l2() - Free struct em28xx_v4l2
>> + *
>> + * @ref: struct kref for struct em28xx_v4l2
>> + *
>> + * Called when all users of struct em28xx_v4l2 are gone
>> + */
>> +void em28xx_free_v4l2(struct kref *ref)
>> +{
>> + struct em28xx_v4l2 *v4l2 = container_of(ref, struct em28xx_v4l2, ref);
>> +
>> + kfree(v4l2);
>> +}
>> +
>> +/*
>> * em28xx_v4l2_open()
>> * inits the device and starts isoc transfer
>> */
>> @@ -1840,6 +1860,7 @@ static int em28xx_v4l2_open(struct file *filp)
>> {
>> struct video_device *vdev = video_devdata(filp);
>> struct em28xx *dev = video_drvdata(filp);
>> + struct em28xx_v4l2 *v4l2 = dev->v4l2;
>> enum v4l2_buf_type fh_type = 0;
>> struct em28xx_fh *fh;
>>
>> @@ -1888,10 +1909,11 @@ static int em28xx_v4l2_open(struct file *filp)
>>
>> if (vdev->vfl_type == VFL_TYPE_RADIO) {
>> em28xx_videodbg("video_open: setting radio device\n");
>> - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio);
>> + v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, s_radio);
>> }
>>
>> kref_get(&dev->ref);
>> + kref_get(&v4l2->ref);
> I never like these kref things. Especially for usb devices I strongly recommend
> using the release() callback from v4l2_device instead: this callback will only
> be called once all references to video_device nodes have been closed. In other
> words, only once all filehandles to /dev/videoX (and radio, vbi etc) are closed
> will the release callback be called.
>
> As such it is a perfect place to put the final cleanup, and there is no more need
> to mess around with krefs.
The v4l2 submodule data struct can not be cleared before 1) the
submodule is unloaded/unregistered AND 2) all users of all device nodes
are gone.
Using a kref is much easier (and also safer) than dealing with
non-trivial case checks in em28xx_v4l2_fini() and the v4l2_device
release() callbacks.
What we could do is to call kref_get() only one time at the first open()
of a device node and kref_put() only at the last close().
But it seems that this would just complicate the code without any real
benefit.
>> dev->users++;
> The same for these user counters. You can use v4l2_fh_is_singular_file() to check
> if the file open is the first file. However, this function assumes that v4l2_fh_add
> has been called first.
>
> So for this driver it might be easier if we add a v4l2_fh_is_empty() to v4l2-fh.c
> so we can call this before v4l2_fh_add.
>
> For that matter, you can almost certainly remove struct em28xx_fh altogether.
> The type field of that struct can be determined by vdev->vfl_type and 'dev' can be
> obtained via video_get_drvdata().
Yes, fields "dev" and "type" can definitly be removed from struct em28xx_fh.
Then struct v4l2_fh fh is the last member, but I didn't have the time
yet to take a deeper look at it.
At a first glance its usage seems to be incomplete/broken.
There are no v4l2_fh_del() and v4l2_fh_exit() calls and I wonder who
deallocates the structs memory !?
Regards,
Frank
>
> Regards,
>
> Hans
>
>>
>> mutex_unlock(&dev->lock);
next prev parent reply other threads:[~2014-05-11 20:46 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-24 19:33 [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Frank Schäfer
2014-03-24 19:33 ` [PATCH 01/19] em28xx: move sub-module data structs to a common place in the main struct Frank Schäfer
2014-03-24 19:33 ` [PATCH 02/19] em28xx-video: simplify usage of the pointer to struct v4l2_ctrl_handler in em28xx_v4l2_init() Frank Schäfer
2014-03-24 19:33 ` [PATCH 03/19] em28xx: start moving em28xx-v4l specific data to its own struct Frank Schäfer
2014-05-09 9:17 ` Hans Verkuil
2014-05-11 20:46 ` Frank Schäfer [this message]
2014-05-12 8:20 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 04/19] em28xx: move struct v4l2_ctrl_handler ctrl_handler from struct em28xx to struct v4l2 Frank Schäfer
2014-03-24 19:33 ` [PATCH 05/19] em28xx: move struct v4l2_clk *clk " Frank Schäfer
2014-03-24 19:33 ` [PATCH 06/19] em28xx: move video_device structs " Frank Schäfer
2014-05-09 9:19 ` Hans Verkuil
2014-05-11 20:50 ` Frank Schäfer
2014-05-12 8:09 ` Hans Verkuil
2014-03-24 19:33 ` [PATCH 07/19] em28xx: move videobuf2 related data " Frank Schäfer
2014-03-24 19:33 ` [PATCH 08/19] em28xx: move v4l2 frame resolutions and scale " Frank Schäfer
2014-03-24 19:33 ` [PATCH 09/19] em28xx: move vinmode and vinctrl " Frank Schäfer
2014-03-24 19:33 ` [PATCH 10/19] em28xx: move TV norm " Frank Schäfer
2014-03-24 19:33 ` [PATCH 11/19] em28xx: move struct em28xx_fmt *format " Frank Schäfer
2014-03-24 19:33 ` [PATCH 12/19] em28xx: move progressive/interlaced fields " Frank Schäfer
2014-03-24 19:33 ` [PATCH 13/19] em28xx: move sensor parameter " Frank Schäfer
2014-03-24 19:33 ` [PATCH 14/19] em28xx: move capture state tracking " Frank Schäfer
2014-03-24 19:33 ` [PATCH 15/19] em28xx: move v4l2 user counting " Frank Schäfer
2014-03-24 19:33 ` [PATCH 16/19] em28xx: move tuner frequency field " Frank Schäfer
2014-03-24 19:33 ` [PATCH 17/19] em28xx: remove field tda9887_conf from struct em28xx Frank Schäfer
2014-03-24 19:33 ` [PATCH 18/19] em28xx: remove field tuner_addr " Frank Schäfer
2014-03-24 19:33 ` [PATCH 19/19] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio Frank Schäfer
2014-05-09 9:04 ` [PATCH 00/19] em28xx: clean up the main device struct and move sub-module specific data to its own data structs Hans Verkuil
2014-05-11 21:01 ` Frank Schäfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536FE1B8.2090603@googlemail.com \
--to=fschaefer.oss@googlemail.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=m.chehab@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.