All of lore.kernel.org
 help / color / mirror / Atom feed
From: George Cherian <george.cherian@ti.com>
To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	Benoit Cousson <bcousson@baylibre.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Felipe Balbi <balbi@ti.com>, Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
Date: Mon, 12 May 2014 10:29:52 +0530	[thread overview]
Message-ID: <53705548.7020400@ti.com> (raw)
In-Reply-To: <1398373881-23369-1-git-send-email-ezequiel@vanguardiasur.com.ar>

On 4/25/2014 2:41 AM, Ezequiel Garcia wrote:
> The DMA controller is needed for the USB controller to be correctly
> registered. Therefore, if the DMA node is located at the end an unecessary
> probe deferral is produced systematically.
>
> This is easily fixed by moving the node at the beggining of the child list,
> so it's probed first.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: George Cherian <george.cherian@ti.com>
> --
> v1->v2:
>    * Added a comment to prevent a future clean-up based on the memory offset.
>
>   arch/arm/boot/dts/am33xx.dtsi | 34 ++++++++++++++++++++--------------
>   1 file changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 9770e35..02e1eb6 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -453,6 +453,26 @@
>   			ti,hwmods = "usb_otg_hs";
>   			status = "disabled";
>   
> +			/*
> +			 * The probe order matches the child ordering so the
> +			 * dma-controller node must be the first one to prevent
> +			 * spurious probe deferrals.
> +			 */
> +			cppi41dma: dma-controller@47402000 {
> +				compatible = "ti,am3359-cppi41";
> +				reg =  <0x47400000 0x1000
> +					0x47402000 0x1000
> +					0x47403000 0x1000
> +					0x47404000 0x4000>;
> +				reg-names = "glue", "controller", "scheduler", "queuemgr";
> +				interrupts = <17>;
> +				interrupt-names = "glue";
> +				#dma-cells = <2>;
> +				#dma-channels = <30>;
> +				#dma-requests = <256>;
> +				status = "disabled";
> +			};
> +
>   			usb_ctrl_mod: control@44e10620 {
>   				compatible = "ti,am335x-usb-ctrl-module";
>   				reg = <0x44e10620 0x10
> @@ -556,20 +576,6 @@
>   					"tx14", "tx15";
>   			};
>   
> -			cppi41dma: dma-controller@47402000 {
> -				compatible = "ti,am3359-cppi41";
> -				reg =  <0x47400000 0x1000
> -					0x47402000 0x1000
> -					0x47403000 0x1000
> -					0x47404000 0x4000>;
> -				reg-names = "glue", "controller", "scheduler", "queuemgr";
> -				interrupts = <17>;
> -				interrupt-names = "glue";
> -				#dma-cells = <2>;
> -				#dma-channels = <30>;
> -				#dma-requests = <256>;
> -				status = "disabled";
> -			};
>   		};
>   
>   		epwmss0: epwmss@48300000 {


-- 
-George


WARNING: multiple messages have this Message-ID (diff)
From: george.cherian@ti.com (George Cherian)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early
Date: Mon, 12 May 2014 10:29:52 +0530	[thread overview]
Message-ID: <53705548.7020400@ti.com> (raw)
In-Reply-To: <1398373881-23369-1-git-send-email-ezequiel@vanguardiasur.com.ar>

On 4/25/2014 2:41 AM, Ezequiel Garcia wrote:
> The DMA controller is needed for the USB controller to be correctly
> registered. Therefore, if the DMA node is located at the end an unecessary
> probe deferral is produced systematically.
>
> This is easily fixed by moving the node at the beggining of the child list,
> so it's probed first.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: George Cherian <george.cherian@ti.com>
> --
> v1->v2:
>    * Added a comment to prevent a future clean-up based on the memory offset.
>
>   arch/arm/boot/dts/am33xx.dtsi | 34 ++++++++++++++++++++--------------
>   1 file changed, 20 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 9770e35..02e1eb6 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -453,6 +453,26 @@
>   			ti,hwmods = "usb_otg_hs";
>   			status = "disabled";
>   
> +			/*
> +			 * The probe order matches the child ordering so the
> +			 * dma-controller node must be the first one to prevent
> +			 * spurious probe deferrals.
> +			 */
> +			cppi41dma: dma-controller at 47402000 {
> +				compatible = "ti,am3359-cppi41";
> +				reg =  <0x47400000 0x1000
> +					0x47402000 0x1000
> +					0x47403000 0x1000
> +					0x47404000 0x4000>;
> +				reg-names = "glue", "controller", "scheduler", "queuemgr";
> +				interrupts = <17>;
> +				interrupt-names = "glue";
> +				#dma-cells = <2>;
> +				#dma-channels = <30>;
> +				#dma-requests = <256>;
> +				status = "disabled";
> +			};
> +
>   			usb_ctrl_mod: control at 44e10620 {
>   				compatible = "ti,am335x-usb-ctrl-module";
>   				reg = <0x44e10620 0x10
> @@ -556,20 +576,6 @@
>   					"tx14", "tx15";
>   			};
>   
> -			cppi41dma: dma-controller at 47402000 {
> -				compatible = "ti,am3359-cppi41";
> -				reg =  <0x47400000 0x1000
> -					0x47402000 0x1000
> -					0x47403000 0x1000
> -					0x47404000 0x4000>;
> -				reg-names = "glue", "controller", "scheduler", "queuemgr";
> -				interrupts = <17>;
> -				interrupt-names = "glue";
> -				#dma-cells = <2>;
> -				#dma-channels = <30>;
> -				#dma-requests = <256>;
> -				status = "disabled";
> -			};
>   		};
>   
>   		epwmss0: epwmss at 48300000 {


-- 
-George

  parent reply	other threads:[~2014-05-12  5:00 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-24 21:11 [PATCH v2] ARM: dts: am33xx: Move the cppi41dma node so it's probed early Ezequiel Garcia
2014-04-24 21:11 ` Ezequiel Garcia
2014-04-29  6:19 ` Yegor Yefremov
2014-04-29  6:19   ` Yegor Yefremov
2014-04-29  7:58   ` George Cherian
2014-04-29  7:58     ` George Cherian
2014-04-29  8:06     ` Sebastian Andrzej Siewior
2014-04-29  8:06       ` Sebastian Andrzej Siewior
2014-04-29  8:27       ` George Cherian
2014-04-29  8:27         ` George Cherian
2014-04-29  9:09         ` Sebastian Andrzej Siewior
2014-04-29  9:09           ` Sebastian Andrzej Siewior
2014-04-29 13:50           ` Ezequiel García
2014-04-29 13:50             ` Ezequiel García
2014-05-08 17:00     ` Ezequiel García
2014-05-08 17:00       ` Ezequiel García
2014-05-09  6:22       ` George Cherian
2014-05-09  6:22         ` George Cherian
2014-05-09  7:25         ` Sebastian Andrzej Siewior
2014-05-09  7:25           ` Sebastian Andrzej Siewior
2014-05-09 10:07           ` George Cherian
2014-05-09 10:07             ` George Cherian
2014-05-09 13:26           ` Ezequiel García
2014-05-09 13:26             ` Ezequiel García
2014-05-12  4:59 ` George Cherian [this message]
2014-05-12  4:59   ` George Cherian
2014-05-12 14:02   ` Ezequiel Garcia
2014-05-12 14:02     ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53705548.7020400@ti.com \
    --to=george.cherian@ti.com \
    --cc=balbi@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=bigeasy@linutronix.de \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.