From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
To: Roland Dreier <roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Alex Chiang <achiang-VXdhtT5mjnY@public.gmane.org>,
linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH 3/3] IB/umad: Fix a use-after-free
Date: Mon, 12 May 2014 10:31:13 +0200 [thread overview]
Message-ID: <537086D1.8010209@acm.org> (raw)
In-Reply-To: <53708666.6060209-HInyCGIudOg@public.gmane.org>
Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n>
triggers a use-after-free. __fput() in fs/file_table.c invokes
f_op->release() before it invokes cdev_put(). Make sure that the
ib_umad_device structure is freed by the cdev_put() call instead of
f_op->release(). This avoids that changing the port mode from IB into
Ethernet and back to IB followed by restarting opensmd triggers the
following kernel oops:
general protection fault: 0000 [#1] PREEMPT SMP
RIP: 0010:[<ffffffff810cc65c>] [<ffffffff810cc65c>] module_put+0x2c/0x170
Call Trace:
[<ffffffff81190f20>] cdev_put+0x20/0x30
[<ffffffff8118e2ce>] __fput+0x1ae/0x1f0
[<ffffffff8118e35e>] ____fput+0xe/0x10
[<ffffffff810723bc>] task_work_run+0xac/0xe0
[<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0
[<ffffffff814b8398>] int_signal+0x12/0x17
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051
Signed-off-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
---
drivers/infiniband/core/user_mad.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 5c67d80..7bec4ca 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -98,7 +98,7 @@ struct ib_umad_port {
struct ib_umad_device {
int start_port, end_port;
- struct kref ref;
+ struct kobject kobj;
struct ib_umad_port port[0];
};
@@ -134,14 +134,18 @@ static DECLARE_BITMAP(dev_map, IB_UMAD_MAX_PORTS);
static void ib_umad_add_one(struct ib_device *device);
static void ib_umad_remove_one(struct ib_device *device);
-static void ib_umad_release_dev(struct kref *ref)
+static void ib_umad_release_dev(struct kobject *kobj)
{
struct ib_umad_device *dev =
- container_of(ref, struct ib_umad_device, ref);
+ container_of(kobj, struct ib_umad_device, kobj);
kfree(dev);
}
+static struct kobj_type ib_umad_dev_ktype = {
+ .release = ib_umad_release_dev,
+};
+
static int hdr_size(struct ib_umad_file *file)
{
return file->use_pkey_index ? sizeof (struct ib_user_mad_hdr) :
@@ -783,7 +787,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp)
int ret = -ENXIO;
port = container_of(inode->i_cdev, struct ib_umad_port, cdev);
- kref_get(&port->umad_dev->ref);
+ kobject_get(&port->umad_dev->kobj);
mutex_lock(&port->file_mutex);
@@ -812,7 +816,7 @@ out:
mutex_unlock(&port->file_mutex);
if (ret)
- kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&port->umad_dev->kobj);
return ret;
}
@@ -849,7 +853,7 @@ static int ib_umad_close(struct inode *inode, struct file *filp)
mutex_unlock(&file->port->file_mutex);
kfree(file);
- kref_put(&dev->ref, ib_umad_release_dev);
+ kobject_put(&dev->kobj);
return 0;
}
@@ -877,7 +881,7 @@ static int ib_umad_sm_open(struct inode *inode, struct file *filp)
int ret;
port = container_of(inode->i_cdev, struct ib_umad_port, sm_cdev);
- kref_get(&port->umad_dev->ref);
+ kobject_get(&port->umad_dev->kobj);
if (filp->f_flags & O_NONBLOCK) {
if (down_trylock(&port->sm_sem)) {
@@ -903,7 +907,7 @@ static int ib_umad_sm_open(struct inode *inode, struct file *filp)
fail:
if (ret)
- kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&port->umad_dev->kobj);
return ret;
clr_sm_cap:
@@ -930,7 +934,7 @@ static int ib_umad_sm_close(struct inode *inode, struct file *filp)
up(&port->sm_sem);
- kref_put(&port->umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&port->umad_dev->kobj);
return ret;
}
@@ -998,6 +1002,7 @@ static int find_overflow_devnum(void)
}
static int ib_umad_init_port(struct ib_device *device, int port_num,
+ struct ib_umad_device *umad_dev,
struct ib_umad_port *port)
{
int devnum;
@@ -1063,6 +1068,11 @@ static int ib_umad_init_port(struct ib_device *device, int port_num,
if (device_create_file(port->sm_dev, &dev_attr_port))
goto err_sm_dev;
+ port->cdev.kobj.parent = &umad_dev->kobj;
+ kobject_get(&umad_dev->kobj);
+ port->sm_cdev.kobj.parent = &umad_dev->kobj;
+ kobject_get(&umad_dev->kobj);
+
return 0;
err_sm_dev:
@@ -1141,7 +1151,7 @@ static void ib_umad_add_one(struct ib_device *device)
if (!umad_dev)
return;
- kref_init(&umad_dev->ref);
+ kobject_init(&umad_dev->kobj, &ib_umad_dev_ktype);
umad_dev->start_port = s;
umad_dev->end_port = e;
@@ -1149,7 +1159,8 @@ static void ib_umad_add_one(struct ib_device *device)
for (i = s; i <= e; ++i) {
umad_dev->port[i - s].umad_dev = umad_dev;
- if (ib_umad_init_port(device, i, &umad_dev->port[i - s]))
+ if (ib_umad_init_port(device, i, umad_dev,
+ &umad_dev->port[i - s]))
goto err;
}
@@ -1161,7 +1172,7 @@ err:
while (--i >= s)
ib_umad_kill_port(&umad_dev->port[i - s]);
- kref_put(&umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&umad_dev->kobj);
}
static void ib_umad_remove_one(struct ib_device *device)
@@ -1175,7 +1186,7 @@ static void ib_umad_remove_one(struct ib_device *device)
for (i = 0; i <= umad_dev->end_port - umad_dev->start_port; ++i)
ib_umad_kill_port(&umad_dev->port[i]);
- kref_put(&umad_dev->ref, ib_umad_release_dev);
+ kobject_put(&umad_dev->kobj);
}
static char *umad_devnode(struct device *dev, umode_t *mode)
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-05-12 8:31 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 8:29 [PATCH 0/3] Fix a use-after-free in ib_umad Bart Van Assche
[not found] ` <53708666.6060209-HInyCGIudOg@public.gmane.org>
2014-05-12 8:30 ` [PATCH 1/3] IB/umad: Remove container_of() != NULL tests Bart Van Assche
[not found] ` <5370869F.5040103-HInyCGIudOg@public.gmane.org>
2014-05-12 10:04 ` Yann Droneaud
[not found] ` <1399889097.3017.1.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-05-12 10:36 ` Bart Van Assche
[not found] ` <5370A41F.8050001-HInyCGIudOg@public.gmane.org>
2014-05-12 12:40 ` Yann Droneaud
2014-05-12 8:30 ` [PATCH 2/3] IB/umad: Fix error handling Bart Van Assche
[not found] ` <537086BA.3020807-HInyCGIudOg@public.gmane.org>
2014-05-12 10:18 ` Yann Droneaud
[not found] ` <1399889890.3017.6.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2014-05-12 10:32 ` Bart Van Assche
[not found] ` <5370A323.5000504-HInyCGIudOg@public.gmane.org>
2014-05-12 12:35 ` Yann Droneaud
2014-05-16 11:03 ` [PATCH v3 0/2] Fix a use-after-free in ib_umad Bart Van Assche
[not found] ` <5375F094.30809-HInyCGIudOg@public.gmane.org>
2014-05-16 11:04 ` [PATCH v3 1/2] IB/umad: Fix error handling Bart Van Assche
[not found] ` <5375F0CD.5080809-HInyCGIudOg@public.gmane.org>
2014-05-20 8:33 ` [PATCH v3.1] " Yann Droneaud
[not found] ` <1400574821-9562-1-git-send-email-ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>
2014-05-20 11:25 ` Bart Van Assche
[not found] ` <537B3BBE.4040202-HInyCGIudOg@public.gmane.org>
2014-05-20 11:39 ` Yann Droneaud
2014-05-16 11:05 ` [PATCH v3 2/2] IB/umad: Fix a use-after-free Bart Van Assche
[not found] ` <5375F108.20608-HInyCGIudOg@public.gmane.org>
2014-05-16 12:28 ` Yann Droneaud
2014-06-06 16:25 ` [RESEND PATCH] " Yann Droneaud
[not found] ` <1402071904-25003-1-git-send-email-ydroneaud-RlY5vtjFyJ3QT0dZR+AlfA@public.gmane.org>
2014-06-06 18:39 ` Roland Dreier
2014-05-12 8:31 ` Bart Van Assche [this message]
2014-05-12 9:17 ` [PATCH 1/3] IB/umad: Remove container_of() != NULL tests Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537086D1.8010209@acm.org \
--to=bvanassche-hinycgiudog@public.gmane.org \
--cc=achiang-VXdhtT5mjnY@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.