From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull mpc85xx
Date: Tue, 13 May 2014 11:12:53 -0500 [thread overview]
Message-ID: <53724485.3050800@freescale.com> (raw)
Tom,
The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e:
kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23:
boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500)
----------------------------------------------------------------
Alexander Graf (4):
PPC 85xx QEMU: Always assume 1 core
PPC 85xx QEMU: Don't use HID1
powerpc/mpc85xx: Update TLB CAMs in relocated mode
PPC 85xx QEMU: Make a generic board file
Aneesh Bansal (2):
powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB
Chunhe Lan (1):
powerpc/85xx: Add T4240RDB board support
Masahiro Yamada (1):
boards.cfg: fix a configuration error of ep8248 board
Shaohui Xie (1):
powerpc/fman/memac: use default MDIO_HOLD value
Shaveta Leekha (2):
board/freescale/common: ZM7300 driver
board/b4qds: VID support
Shengzhou Liu (2):
powerpc/t208x: enable errata A006261, A006593, A006379
powerpc/85xx: add T4080 SoC support
Stefan Bigler (2):
kmp204x: Add support for the unit LEDs
kmp204x: handle dip-switch for factory settings
Valentin Longchamp (6):
kmp204x: selftest/factory test pin support
kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
kmp204x: complete the reset sequence and PRST configuration
kmp204x: update the RCW
kmp204x: add workaround for A-004849
kmp204x: enable the errata command
York Sun (6):
powerpc/mpc8572ds: Increase u-boot size to 768KB
powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()
powerpc/freescale: Change the return value of mac_read_from_eeprom()
powerpc/mpc85xx: Fix boot_flag for calling board_init_f()
powerpc/mpc86xx: Fix boot_flag for calling board_init_f()
powerpc/freescale: Convert selected boards to generic board architecture
Zhao Qiang (1):
qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"
arch/powerpc/cpu/mpc85xx/Makefile | 2 +
arch/powerpc/cpu/mpc85xx/cpu.c | 24 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +-
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +
arch/powerpc/cpu/mpc85xx/speed.c | 3 +-
arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 +-
arch/powerpc/cpu/mpc85xx/start.S | 4 +-
arch/powerpc/cpu/mpc85xx/t4240_ids.c | 2 +
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 2 +-
arch/powerpc/cpu/mpc86xx/start.S | 1 +
arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +-
arch/powerpc/include/asm/config_mpc85xx.h | 19 +-
arch/powerpc/include/asm/fsl_errata.h | 5 +
arch/powerpc/include/asm/fsl_secure_boot.h | 3 +-
arch/powerpc/include/asm/immap_85xx.h | 6 +-
arch/powerpc/include/asm/processor.h | 1 +
board/freescale/b4860qds/b4860qds.c | 240 +++++++++
board/freescale/common/Makefile | 1 +
board/freescale/common/sys_eeprom.c | 6 +-
board/freescale/common/zm7300.c | 235 +++++++++
board/freescale/common/zm7300.h | 22 +
board/freescale/qemu-ppce500/qemu-ppce500.c | 20 +
board/freescale/t4rdb/Makefile | 12 +
board/freescale/t4rdb/ddr.c | 118 +++++
board/freescale/t4rdb/ddr.h | 78 +++
board/freescale/t4rdb/eth.c | 146 ++++++
board/freescale/t4rdb/law.c | 28 +
board/freescale/t4rdb/pci.c | 23 +
board/freescale/t4rdb/t4240rdb.c | 125 +++++
board/freescale/t4rdb/t4_pbi.cfg | 31 ++
board/freescale/t4rdb/t4_rcw.cfg | 7 +
board/freescale/t4rdb/t4rdb.h | 18 +
board/freescale/t4rdb/tlb.c | 111 ++++
board/keymile/kmp204x/kmp204x.c | 75 ++-
board/keymile/kmp204x/kmp204x.h | 3 +
board/keymile/kmp204x/pbi.cfg | 43 +-
board/keymile/kmp204x/pci.c | 17 +-
board/keymile/kmp204x/qrio.c | 31 +-
board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
boards.cfg | 7 +-
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/memac_phy.c | 8 +-
drivers/qe/qe.c | 9 +-
include/common.h | 5 +-
include/configs/B4860QDS.h | 14 +
include/configs/MPC8536DS.h | 2 +
include/configs/MPC8572DS.h | 5 +-
include/configs/MPC8641HPCN.h | 3 +
include/configs/T208xRDB.h | 1 +
include/configs/T4240RDB.h | 752 +++++++++++++++++++++++++++
include/configs/corenet_ds.h | 3 +
include/configs/km/kmp204x-common.h | 17 +-
include/configs/p1_p2_rdb_pc.h | 3 +
include/configs/qemu-ppce500.h | 1 +
include/configs/t4qds.h | 2 +
56 files changed, 2257 insertions(+), 70 deletions(-)
create mode 100644 board/freescale/common/zm7300.c
create mode 100644 board/freescale/common/zm7300.h
create mode 100644 board/freescale/t4rdb/Makefile
create mode 100644 board/freescale/t4rdb/ddr.c
create mode 100644 board/freescale/t4rdb/ddr.h
create mode 100644 board/freescale/t4rdb/eth.c
create mode 100644 board/freescale/t4rdb/law.c
create mode 100644 board/freescale/t4rdb/pci.c
create mode 100644 board/freescale/t4rdb/t4240rdb.c
create mode 100644 board/freescale/t4rdb/t4_pbi.cfg
create mode 100644 board/freescale/t4rdb/t4_rcw.cfg
create mode 100644 board/freescale/t4rdb/t4rdb.h
create mode 100644 board/freescale/t4rdb/tlb.c
create mode 100644 include/configs/T4240RDB.h
Thanks,
York
next reply other threads:[~2014-05-13 16:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 16:12 York Sun [this message]
2014-05-13 16:14 ` [U-Boot] Please pull mpc85xx York Sun
2014-05-13 21:45 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2014-11-14 21:20 [U-Boot] please " York Sun
2014-11-17 0:45 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53724485.3050800@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.