All of lore.kernel.org
 help / color / mirror / Atom feed
From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull mpc85xx
Date: Tue, 13 May 2014 11:14:51 -0500	[thread overview]
Message-ID: <537244FB.8070708@freescale.com> (raw)
In-Reply-To: <53724485.3050800@freescale.com>

Tom,

I forgot to add my "Reviewed-by" for this set. Let me know if I have to fix them.

York


On 05/13/2014 11:12 AM, York Sun wrote:
> Tom,
> 
> The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e:
> 
>   kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc85xx.git master
> 
> for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23:
> 
>   boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500)
> 
> ----------------------------------------------------------------
> Alexander Graf (4):
>       PPC 85xx QEMU: Always assume 1 core
>       PPC 85xx QEMU: Don't use HID1
>       powerpc/mpc85xx: Update TLB CAMs in relocated mode
>       PPC 85xx QEMU: Make a generic board file
> 
> Aneesh Bansal (2):
>       powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
>       powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB
> 
> Chunhe Lan (1):
>       powerpc/85xx: Add T4240RDB board support
> 
> Masahiro Yamada (1):
>       boards.cfg: fix a configuration error of ep8248 board
> 
> Shaohui Xie (1):
>       powerpc/fman/memac: use default MDIO_HOLD value
> 
> Shaveta Leekha (2):
>       board/freescale/common: ZM7300 driver
>       board/b4qds: VID support
> 
> Shengzhou Liu (2):
>       powerpc/t208x: enable errata A006261, A006593, A006379
>       powerpc/85xx: add T4080 SoC support
> 
> Stefan Bigler (2):
>       kmp204x: Add support for the unit LEDs
>       kmp204x: handle dip-switch for factory settings
> 
> Valentin Longchamp (6):
>       kmp204x: selftest/factory test pin support
>       kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
>       kmp204x: complete the reset sequence and PRST configuration
>       kmp204x: update the RCW
>       kmp204x: add workaround for A-004849
>       kmp204x: enable the errata command
> 
> York Sun (6):
>       powerpc/mpc8572ds: Increase u-boot size to 768KB
>       powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()
>       powerpc/freescale: Change the return value of mac_read_from_eeprom()
>       powerpc/mpc85xx: Fix boot_flag for calling board_init_f()
>       powerpc/mpc86xx: Fix boot_flag for calling board_init_f()
>       powerpc/freescale: Convert selected boards to generic board architecture
> 
> Zhao Qiang (1):
>       qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"
> 
>  arch/powerpc/cpu/mpc85xx/Makefile           |    2 +
>  arch/powerpc/cpu/mpc85xx/cpu.c              |   24 +
>  arch/powerpc/cpu/mpc85xx/cpu_init.c         |   17 +-
>  arch/powerpc/cpu/mpc85xx/cpu_init_early.c   |    2 +
>  arch/powerpc/cpu/mpc85xx/speed.c            |    3 +-
>  arch/powerpc/cpu/mpc85xx/spl_minimal.c      |    4 +-
>  arch/powerpc/cpu/mpc85xx/start.S            |    4 +-
>  arch/powerpc/cpu/mpc85xx/t4240_ids.c        |    2 +
>  arch/powerpc/cpu/mpc85xx/t4240_serdes.c     |    2 +-
>  arch/powerpc/cpu/mpc86xx/start.S            |    1 +
>  arch/powerpc/cpu/mpc8xxx/cpu.c              |    5 +-
>  arch/powerpc/include/asm/config_mpc85xx.h   |   19 +-
>  arch/powerpc/include/asm/fsl_errata.h       |    5 +
>  arch/powerpc/include/asm/fsl_secure_boot.h  |    3 +-
>  arch/powerpc/include/asm/immap_85xx.h       |    6 +-
>  arch/powerpc/include/asm/processor.h        |    1 +
>  board/freescale/b4860qds/b4860qds.c         |  240 +++++++++
>  board/freescale/common/Makefile             |    1 +
>  board/freescale/common/sys_eeprom.c         |    6 +-
>  board/freescale/common/zm7300.c             |  235 +++++++++
>  board/freescale/common/zm7300.h             |   22 +
>  board/freescale/qemu-ppce500/qemu-ppce500.c |   20 +
>  board/freescale/t4rdb/Makefile              |   12 +
>  board/freescale/t4rdb/ddr.c                 |  118 +++++
>  board/freescale/t4rdb/ddr.h                 |   78 +++
>  board/freescale/t4rdb/eth.c                 |  146 ++++++
>  board/freescale/t4rdb/law.c                 |   28 +
>  board/freescale/t4rdb/pci.c                 |   23 +
>  board/freescale/t4rdb/t4240rdb.c            |  125 +++++
>  board/freescale/t4rdb/t4_pbi.cfg            |   31 ++
>  board/freescale/t4rdb/t4_rcw.cfg            |    7 +
>  board/freescale/t4rdb/t4rdb.h               |   18 +
>  board/freescale/t4rdb/tlb.c                 |  111 ++++
>  board/keymile/kmp204x/kmp204x.c             |   75 ++-
>  board/keymile/kmp204x/kmp204x.h             |    3 +
>  board/keymile/kmp204x/pbi.cfg               |   43 +-
>  board/keymile/kmp204x/pci.c                 |   17 +-
>  board/keymile/kmp204x/qrio.c                |   31 +-
>  board/keymile/kmp204x/rcw_kmp204x.cfg       |    2 +-
>  boards.cfg                                  |    7 +-
>  drivers/mmc/fsl_esdhc.c                     |    2 +-
>  drivers/net/fm/Makefile                     |    1 +
>  drivers/net/fm/memac_phy.c                  |    8 +-
>  drivers/qe/qe.c                             |    9 +-
>  include/common.h                            |    5 +-
>  include/configs/B4860QDS.h                  |   14 +
>  include/configs/MPC8536DS.h                 |    2 +
>  include/configs/MPC8572DS.h                 |    5 +-
>  include/configs/MPC8641HPCN.h               |    3 +
>  include/configs/T208xRDB.h                  |    1 +
>  include/configs/T4240RDB.h                  |  752 +++++++++++++++++++++++++++
>  include/configs/corenet_ds.h                |    3 +
>  include/configs/km/kmp204x-common.h         |   17 +-
>  include/configs/p1_p2_rdb_pc.h              |    3 +
>  include/configs/qemu-ppce500.h              |    1 +
>  include/configs/t4qds.h                     |    2 +
>  56 files changed, 2257 insertions(+), 70 deletions(-)
>  create mode 100644 board/freescale/common/zm7300.c
>  create mode 100644 board/freescale/common/zm7300.h
>  create mode 100644 board/freescale/t4rdb/Makefile
>  create mode 100644 board/freescale/t4rdb/ddr.c
>  create mode 100644 board/freescale/t4rdb/ddr.h
>  create mode 100644 board/freescale/t4rdb/eth.c
>  create mode 100644 board/freescale/t4rdb/law.c
>  create mode 100644 board/freescale/t4rdb/pci.c
>  create mode 100644 board/freescale/t4rdb/t4240rdb.c
>  create mode 100644 board/freescale/t4rdb/t4_pbi.cfg
>  create mode 100644 board/freescale/t4rdb/t4_rcw.cfg
>  create mode 100644 board/freescale/t4rdb/t4rdb.h
>  create mode 100644 board/freescale/t4rdb/tlb.c
>  create mode 100644 include/configs/T4240RDB.h
> 
> Thanks,
> 
> York
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

  reply	other threads:[~2014-05-13 16:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-13 16:12 [U-Boot] Please pull mpc85xx York Sun
2014-05-13 16:14 ` York Sun [this message]
2014-05-13 21:45 ` Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2014-11-14 21:20 [U-Boot] please " York Sun
2014-11-17  0:45 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=537244FB.8070708@freescale.com \
    --to=yorksun@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.