From mboxrd@z Thu Jan  1 00:00:00 1970
From: Minkyu Kang <mk7.kang@samsung.com>
Date: Thu, 15 May 2014 10:19:42 +0900
Subject: [U-Boot] [PATCHv3 01/13] arm: exynos: pinmux: add sdmmc4 gpio
	configratuion
In-Reply-To: <1397195727-29969-2-git-send-email-jh80.chung@samsung.com>
References: <1397195727-29969-1-git-send-email-jh80.chung@samsung.com>
	<1397195727-29969-2-git-send-email-jh80.chung@samsung.com>
Message-ID: <5374162E.50306@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Beonho and Jaehoon,

On 11/04/14 14:55, Jaehoon Chung wrote:
> From: Beomho Seo <beomho.seo@samsung.com>
> 
> For use dwmmc controller at exynos4, add SDMMC4 gpio configuration.
> In case SDMMC2, do not use 8 bit mode at exynos4.
> 
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Tested-by: Piotr Wilczek <p.wilczek@samsung.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Piotr Wilczek <p.wilczek@samsung.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
>  arch/arm/cpu/armv7/exynos/pinmux.c |   18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
> index 9edb475..55c1c95 100644
> --- a/arch/arm/cpu/armv7/exynos/pinmux.c
> +++ b/arch/arm/cpu/armv7/exynos/pinmux.c
> @@ -632,16 +632,27 @@ static int exynos4_mmc_config(int peripheral, int flags)
>  	struct exynos4_gpio_part2 *gpio2 =
>  		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
>  	struct s5p_gpio_bank *bank, *bank_ext;
> +	unsigned int  func, func_ext;
>  	int i;
>  
>  	switch (peripheral) {
>  	case PERIPH_ID_SDMMC0:
>  		bank = &gpio2->k0;
>  		bank_ext = &gpio2->k1;
> +		func = GPIO_FUNC(0x2);
> +		func_ext = GPIO_FUNC(0x3);
>  		break;
>  	case PERIPH_ID_SDMMC2:
>  		bank = &gpio2->k2;
>  		bank_ext = &gpio2->k3;
> +		func = GPIO_FUNC(0x2);
> +		func_ext = GPIO_FUNC(0x3);
> +		break;
> +	case PERIPH_ID_SDMMC4:
> +		bank = &gpio2->k0;
> +		bank_ext = &gpio2->k1;
> +		func = GPIO_FUNC(0x3);
> +		func_ext = GPIO_FUNC(0x4);
>  		break;
>  	default:
>  		return -1;
> @@ -649,13 +660,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
>  	for (i = 0; i < 7; i++) {
>  		if (i == 2)
>  			continue;
> -		s5p_gpio_cfg_pin(bank, i,  GPIO_FUNC(0x2));
> +		s5p_gpio_cfg_pin(bank, i,  func);
>  		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
>  		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
>  	}
> +	/* SDMMC2 do not use 8bit mode at exynos4 */
>  	if (flags & PINMUX_FLAG_8BIT_MODE) {
>  		for (i = 3; i < 7; i++) {
> -			s5p_gpio_cfg_pin(bank_ext, i,  GPIO_FUNC(0x3));
> +			s5p_gpio_cfg_pin(bank_ext, i,  func_ext);
>  			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
>  			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
>  		}
> @@ -722,10 +734,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
>  		break;
>  	case PERIPH_ID_SDMMC0:
>  	case PERIPH_ID_SDMMC2:
> +	case PERIPH_ID_SDMMC4:
>  		return exynos4_mmc_config(peripheral, flags);
>  	case PERIPH_ID_SDMMC1:
>  	case PERIPH_ID_SDMMC3:
> -	case PERIPH_ID_SDMMC4:
>  		debug("SDMMC device %d not implemented\n", peripheral);
>  		return -1;
>  	default:
> 

Since GIPO API was changed, please rebase this patch.

Thanks,
Minkyu Kang.