From: Hans de Goede <hdegoede@redhat.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>, Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org
Subject: Re: [PATCH] acpi: mv models with win8 brightness problems from win8 blacklist to use_native_backlight
Date: Fri, 16 May 2014 20:57:23 +0200 [thread overview]
Message-ID: <53765F93.2000403@redhat.com> (raw)
In-Reply-To: <12075536.Y1QkyZAZU4@vostro.rjw.lan>
Hi,
On 05/16/2014 01:54 PM, Rafael J. Wysocki wrote:
> On Friday, May 02, 2014 04:50:52 PM Hans de Goede wrote:
>> When the windows8 related backlight problems became evident, 2 approaches
>> were follow in parallel, one was to stop claiming to be windows 8 / 2012,
>> the other was to tell acpi_video to stop registering a backlight driver.
>>
>> I've read all the threads and it seems that which approach ended up being
>> applied to which model laptop was never really a concious decision (AFAIK).
>>
>> So lets move all the models which are only on the win8 blacklist because of
>> brightness issues to the use_native_backlight list, which is the smaller
>> hammer to use to solve the backlight issues.
>>
>> Note: this is not tested on any of the affected models, this just seems like
>> the sensible thing to do.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> This doesn't apply for me on top of current linux-next, care to rebase?
Good, I was about to send a self-nack for this, as it seems that the
thinkpad 30 series (ie 430 530) actually really need "!Windows 2012", see:
https://bugzilla.redhat.com/show_bug.cgi?id=1089545
This is not 100% certain yet, but it sure seems that way.
I would still like to move the Acer's of the list though, so I'll do
a new patch Monday moving just the Acer-s.
Regards,
Hans
>
>> ---
>> drivers/acpi/blacklist.c | 75 ------------------------------------------------
>> drivers/acpi/video.c | 72 +++++++++++++++++++++++++++++++++++++++++++---
>> 2 files changed, 68 insertions(+), 79 deletions(-)
>>
>> diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
>> index afec452..51b8f64 100644
>> --- a/drivers/acpi/blacklist.c
>> +++ b/drivers/acpi/blacklist.c
>> @@ -156,12 +156,6 @@ static int __init dmi_disable_osi_win7(const struct dmi_system_id *d)
>> acpi_osi_setup("!Windows 2009");
>> return 0;
>> }
>> -static int __init dmi_disable_osi_win8(const struct dmi_system_id *d)
>> -{
>> - printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
>> - acpi_osi_setup("!Windows 2012");
>> - return 0;
>> -}
>>
>> static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
>> {
>> @@ -247,75 +241,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
>> },
>>
>> /*
>> - * The following machines have broken backlight support when reporting
>> - * the Windows 2012 OSI, so disable it until their support is fixed.
>> - */
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ASUS Zenbook Prime UX31A",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
>> - DMI_MATCH(DMI_PRODUCT_NAME, "UX31A"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ThinkPad Edge E530",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "3259A2G"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ThinkPad Edge E530",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "3259CTO"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ThinkPad Edge E530",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "3259HJG"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "Acer Aspire V5-573G",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "Acer Aspire"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "V5-573G/Dazzle_HW"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "Acer Aspire V5-572G",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "Acer Aspire"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "V5-572G/Dazzle_CX"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ThinkPad T431s",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "20AACTO1WW"),
>> - },
>> - },
>> - {
>> - .callback = dmi_disable_osi_win8,
>> - .ident = "ThinkPad T430",
>> - .matches = {
>> - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "2349D15"),
>> - },
>> - },
>> -
>> - /*
>> * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
>> * Linux ignores it, except for the machines enumerated below.
>> */
>> diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
>> index 48146fc..e7a1190 100644
>> --- a/drivers/acpi/video.c
>> +++ b/drivers/acpi/video.c
>> @@ -457,18 +457,58 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
>> },
>> {
>> .callback = video_set_use_native_backlight,
>> - .ident = "ThinkPad T430s",
>> + .ident = "ThinkPad X230",
>> .matches = {
>> DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T430s"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X230"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ThinkPad T430",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "2349D15"),
>> },
>> },
>> {
>> .callback = video_set_use_native_backlight,
>> - .ident = "ThinkPad X230",
>> + .ident = "ThinkPad T430s",
>> .matches = {
>> DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X230"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T430s"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ThinkPad T431s",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "20AACTO1WW"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ThinkPad Edge E530",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "3259A2G"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ThinkPad Edge E530",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "3259CTO"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ThinkPad Edge E530",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "3259HJG"),
>> },
>> },
>> {
>> @@ -545,6 +585,22 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
>> },
>> {
>> .callback = video_set_use_native_backlight,
>> + .ident = "Acer Aspire V5-572G",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "Acer Aspire"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "V5-572G/Dazzle_CX"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "Acer Aspire V5-573G",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "Acer Aspire"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "V5-573G/Dazzle_HW"),
>> + },
>> + },
>> + {
>> + .callback = video_set_use_native_backlight,
>> .ident = "HP ProBook 4340s",
>> .matches = {
>> DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
>> @@ -609,6 +665,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
>> DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
>> },
>> },
>> + {
>> + .callback = video_set_use_native_backlight,
>> + .ident = "ASUS Zenbook Prime UX31A",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
>> + DMI_MATCH(DMI_PRODUCT_NAME, "UX31A"),
>> + },
>> + },
>> {}
>> };
>>
>>
>
next prev parent reply other threads:[~2014-05-16 18:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-02 14:50 [PATCH] acpi: mv models with win8 brightness problems from win8 blacklist to use_native_backlight Hans de Goede
2014-05-16 11:54 ` Rafael J. Wysocki
2014-05-16 18:57 ` Hans de Goede [this message]
2014-06-16 9:54 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53765F93.2000403@redhat.com \
--to=hdegoede@redhat.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.